Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LONG POLE<br />
LONG POLE<br />
DREAM TEAM XTR ALLROUND<br />
Thanks to its extreme effectiveness and<br />
relative simplicity, pole fishing attracts<br />
increasing numbers of anglers, even in<br />
the marine environment, who are often<br />
concerned about the cost of the rod.<br />
Marco Marranzano<br />
With this excellent and robust pole, <strong>Trabucco</strong> want to cancel any doubt,<br />
proposing to a very accessible price a rod which is long enough to face the<br />
fishing in canal, river or lake to experience the first feelings without engaging<br />
in a competition. The safety of the structure in High Resistance Carbon<br />
is out of question, as no fish is able to put it into crisis. The telescopic top<br />
can be cut as wished to fit the diameter of the elastic, or eliminated by applying<br />
the bush directly on the second section. The rod is supplied with an<br />
extra kit of three sections, identical to those included in the rod; additional<br />
3 section’s kits can then be purchased separately.<br />
Code Description Length Ø C. Length Wt Sections<br />
131-87-950 Dream Team XTR Allround 9.50 43 155 780 7<br />
131-87-960 Dream Team XTR Match Top 3 3.20 - 127 80 3<br />
POLE PACK<br />
• 1x Dream Team XTR<br />
Allround 9.50 m<br />
• 1x Kit 3 Match (3,20 m)<br />
DREAM TEAM XTR MARGIN CARP 6004<br />
Specially developed for commercial close-in fishing, which of course meets his peak during<br />
summer months when carp patrol the bank’s step to look for food.<br />
DREAM TEAM XTR POWER CARP II<br />
Pole featuring remarkable power and exceptional balance, whose structure is completely put<br />
over, including the top section that offers a wide top bore of 4 mm.<br />
Designed for commercial carp job, it fits the Strippa System, a SiC lined<br />
hole which enables to extract the elastic during the fish fight, actually adjusting<br />
the tension as needed to bring the fish to the landing net. Made<br />
from High Resistance carbon, it’s finished with a special ultra-smooth paint<br />
which makes it pleasant to use and prevents it from sticking to the hands<br />
when the rod is not dry. The Power Carp is supplied with an extra kit of two<br />
sections, also prepared with the Strippa System, while further kits of 2 or 3<br />
sections can be purchased separately.<br />
POLE PACK<br />
The High Resistance carbon blank can face the toughest battle, even though<br />
the chance to drive the elastic through the dedicated door (XTR Strippa on<br />
section nr. 2, now larger than ever with 4 mm width) reduces the stress on the<br />
pole because most of the fight is run with rod tip in line with the rig. Nothing to<br />
do with those standard commercial “speedy” poles, which aren’t speedy at all<br />
because the pressure on fish is so high to cause panic, with longer fight time<br />
and growing chances to miss a few fish. Easy to clean, the rod’s surface has<br />
been slide finished (<strong>Trabucco</strong> A.S.E.F.) to smoothly run forth and back by hundreds<br />
of times. The XTR Margin Carp has all sections put-over, including top<br />
Code Description Length Ø C. Length Wt Sections<br />
131-86-750 Dream Team XTR Margin Carp 6.00 33 160 430 4<br />
131-86-710 Dream Team XTR Carp Top 2 2.60 - 128 70 2<br />
131-86-720 Dream Team XTR Carp Top 3 3.80 - 135 155 3<br />
with 4 mm bore, and is supplied with an extra 2 section’s kit (2,60 m), exactly<br />
same as the top two sections of the pole. Further kits of 2 or 3 sections - all<br />
fitting Strippa System - can be bought separately.<br />
POLE PACK<br />
• 1x Dream Team XTR<br />
Margin Carp 6.00 m<br />
• 1x Kit 2 Carp (2,60 m)<br />
Code Description Length Ø C. Length Wt Sections<br />
131-86-850 Dream Team XTR Power Carp II 8.00 40 140 820 6<br />
131-86-710 Dream Team XTR Carp Top 2 2.60 - 128 70 2<br />
131-86-720 Dream Team XTR Carp Top 3 3.80 - 135 155 3<br />
• Dream Team XTR Power<br />
Carp II 8.00 m<br />
• Kit 2 Carp (2,60 m)<br />
XPS ELASTICS<br />
Within <strong>Trabucco</strong><br />
XPS<br />
range you can<br />
easily find the<br />
proper elastic for<br />
the most stressful<br />
fishing style, with hollow,<br />
solid or double models<br />
XPS POWER CORE<br />
HOLLOW LATEX<br />
XPS FLUORO LATEX<br />
Find out more on page 328<br />
In the bottom area of second section you find a 4 mm wide hole, SiC<br />
lined for total protection, that enables to adjust the elastic tension<br />
during the fight.<br />
DEMON POLE<br />
Developed to fight with any particularly strong fish, which may submit the pole to<br />
extreme pulls, this series is available in three lengths to enable the user to get a<br />
tailor made rod, according to the personal fishing style and the environments that he<br />
usually attends.<br />
Code Description Length Ø C. Length Wt Sections<br />
131-90-600 Demon Put Over Pole 6.0 6.00 35 115 430 6<br />
131-90-700 Demon Put Over Pole 7.0 7.00 37 115 630 7<br />
131-90-800 Demon Put Over Pole 8.0 8.00 40 115 830 8<br />
Just make a loop at the end of the elastic, which will be useful to<br />
pick it up as a handle, leaving a relatively long barb. A rubber bead<br />
will prevent the knot from entering the hole when the tension will<br />
be maximum.<br />
The strong carbon and fiberglass composite is completely put over, except<br />
for the top, to allow fishing even close in, during the summer season. The<br />
tubular top section can be chopped down to adapt it to different size elastics<br />
of different diameter, but it can also be completely removed in case a<br />
particularly powerful elastic should be needed.<br />
8 | <strong>Trabucco</strong> Product Guide <strong>2017</strong> WWW.TRABUCCO.IT | 9
Change language