ComX Computers price list

http://www.comx-computers.co.za
http://www.laptopdirect.co.za
sales@comx-computers.co.za
Page 84/971
CH-ZAMFC3 R 731 zalman ZM-MFC3, with timer , 4 channels ( 1x PWM fan and 3x standard fans.) fan controller + jog wheel dial +
real time display of power consumption , FSTN Lcd display with wide viewing angle ( for rpm / Temperatures /
power-load / timer ) , with over-heat alarm - for 5.25" Bay
CR-V935i R 272 Vantec ugt-cr935 internal card reader with 1 USB 3.0 downstream port for 3.5" bay- via on-board 20pin USB
3.0 header - for CF/MD, SD, SDHC, SDXC, SM, MMC, MS, Ms Duo, XD - retail pack
CS52 R 330 ATEN 2 PORT HYBRID (PS/2 & USB) KVM SWITCH
EE-IAH R 90 ICYDOCK Hybrid external e-SATA + ac power connector on PCI bracket - from SATA on motherboard to External
E-SATA + 4pin molex from psu to power connector - for ICYDOCK external enclosure.
EN55338 R 376 AeroCool Touch 1000 Single Bay Touch Panel, 4 Channel Fan Controller, Overheating alarm, Celsius /Fahrenheit
EN55345 R 519 AeroCool Touch 2000 Dual Bay Touch Panel, 4 Channel Fan Controller, Overheating alarm, Celsius /Fahrenheit,
LCD back light on/off
EN55390 R 176 AeroCool F4XT Single Bay, 4 Channel Fan Controller, 3 Adjustable speeds, 2x USB Ports, LED on / off switch
EN55406 R 204 AeroCool F6XT Single Bay, 6 Channel Fan Controller, 3 Adjustable speeds, 2x USB Ports, Dual LED colors + LED
off functions
FA-ASC100 R 155 Antec Spot Cool 100 with Blue LED, mounted onto motherboard/ chassis standard screw mounting, flexible and
angle adjustable for any place on the motherboard area - thermal controlled 100mm fan with dual-mode switch (full
speed or thermal controlled), 1000 - 2000rpm, 4.9 - 9.8 CFM , 16 - 24.8 dBA
FA-LBS08 R 420 Lian-li BS-08 internal pci fan card , aluminum - require 2 x pci slot , 2x120mm fan , 100rpm , pull hot air in or out
through expansion slot - compatiable with most of case
FA-LPTAF14B R 46 Lian-li PT-AF14B dust filter for 140mm fan , black
GC-USB-2P R 43 GIGABYTE® 10-Pin 2-Port USB cable
HD-KABR35 R 76 2.5" to 3.5" mounting bracket ( for 2.5" hdd/ssd )
HD-VA250 R 36 vizo avk-250bk - 2.5" hdd anti-vibration / protection kit , ultra-light silica gel , stackable design , ideal for usage
outside of chassis
HD-VA350 R 46 vizo avk-350bk - 3.5" hdd anti-vibration / protection kit , ultra-light silica gel , stackable design , ideal for usage
outside of chassis
iC-SiSV R 182 Sunix SABR1000D Interface Converter - divert IDE device ( 5.25" or 3.5" ) to sata interface , Vertical
type , Silicon Image Sil3611 chipset , support hot-plug - with s-ata cable , 4pin power connector , retail pack
MB-LAPTioC01 R 43 Lian-li PT-ioC-01 - I/O ports protective cover kit - 6x usb+ 2x e-Sata + 2x iEEE1394
MB-U22 R 58 2 port usb cable set - connect from on-board usb header to 1x pci bracket
MCK-IOUV-BK R 34 UV-reactive BLACK. Removing the power plug from devices inside your computer can be difficult with standard
molex plugs. The protrusions on the side of the molex are difficult to hold firmly and, if you were to exert force, may
leave your fingers a bit sore. The Vantec EZ-Grip Molex connectors simplify the ordeal by putting flexible, rounded
grips on the top and bottom of the molex connector. Not only do these grips make it easier to hold, pressing down
on the grips slightly separates the connector from the device making it perfect for when the molex connector feels
"stuck."
MCK-IOUV-BL R 34 UV-reactive BLUE. Removing the power plug from devices inside your computer can be difficult with standard
molex plugs. The protrusions on the side of the molex are difficult to hold firmly and, if you were to exert force, may
leave your fingers a bit sore. The Vantec EZ-Grip Molex connectors simplify the ordeal by putting flexible, rounded
grips on the top and bottom of the molex connector. Not only do these grips make it easier to hold, pressing down
on the grips slightly separates the connector from the device making it perfect for when the molex connector feels
"stuck."
MCK-IOUV-RD R 34 UV-reactive RED. Removing the power plug from devices inside your computer can be difficult with standard molex
plugs. The protrusions on the side of the molex are difficult to hold firmly and, if you were to exert force, may leave
your fingers a bit sore. The Vantec EZ-Grip Molex connectors simplify the ordeal by putting flexible, rounded grips
on the top and bottom of the molex connector. Not only do these grips make it easier to hold, pressing down on the
grips slightly separates the connector from the device making it perfect for when the molex connector feels
"stuck."
MEVEV49800 R 87 Verbatim Rapier Precision Gaming Pad
9 December, 2012 http://www.comx-computers.co.za