Digital Cameras - SourcingMap

$8.39
model: a09021400ux0148
$7.89
model: a11031500ux0172
$7.89
model: a08022500ux0004
58mm Flower Camera Lens Hood for Minolta / Nikon / Olympus
Qty 1 6 10 30 50 100 500
Price $8.39 $8.08 $7.77 $7.46 $6.95 $6.33 $5.31
04/2011
Description: * Flower shaped 58mm Lens Hood with screw mount fits all lens or filters of size 58mm. * Compatible
with Nikon, Canon, Sigma, Tamron, Sony, Minolta, Olympus, and etc. * Constructed with high impact plastic,
this Olympus Lens Hood not only prevents glare and lens flare, but also provides an extra protection to your lens.
* This Minolta Lens Hood can lower the contrast of the image. * Enables you to shoot towards the light source,
and being reflected inside the lens, without excessive flare. * Stops light coming into the lens at extreme angles
and being reflected inside the lens. * This is a non-OEM generic product. * Thread Diameter: 58mm * Product
Dimension: ~8. 2(D) x 4. 2(H)cm * Weight: 36gPackage Included: * 1 x Flower Camera Lens Hood
58mm Three Way Soft Rubber Lens Hood for Digital Film Camera
Qty 1 6 10 30 50 100 500
Price $7.89 $7.67 $7.45 $7.03 $6.81 $6.37 $5.53
Specifications: Product NameLens HoodCompatible WithAll Lens w 58mm Filter ThreadTotal
Diameter98mmMaterialRubber & PlasticColorBlackWeight39. 4gPackage1 x Lens HoodDescription: * The
hood is for use with any type of lens and fits a standard 58mm thread. * Provides protection from unwanted light
flares and from accidental physical damage. * Provides the solution to the problems caused by sun glare, rain and
wind-blown debris. * This triple-position rubber lens hood covers different focal lengths. * The rubber material is
acid proof and temperature insensitive.
62mm Camera Lens Hood for Canon / Nikon
Qty 1 6 10 30 50 100 500
Price $7.89 $7.75 $7.61 $7.46 $7.12 $6.84 $6.56
Description: * The Camera Lens Hood is fresh and new, soft and pliable. Instruction for triple-purpose light shield.
* The rubber material is acid proof and temperature insensitive. * The Internal baffles absorb all stray light
reflections and the ring has inside threads for filters. * Lens Hood block side glare and augment the protection
provided by filters to the lens surface and ring. * Lens Hood is primarily designed to avoid unwanted stray light
from entering the lens by extending and shading the end of the lens. * In addition, since the end of the lens is
extended, you also get the added benefit of some extra protection from accidental impact. * Dedicated lens Hoods
are designed to match the specific focal length of the lens it was designed for * Size: 62mm in diameter, fits all
lens / filters of size 62mm. As Canon Lens Hood, Nikon Lens Hood or any other brand camera. * Weight: 54g
Page 775/931