OEM Solutions - Theben

Recommendations

Info

4 Control of air quality in accordance with DIN EN 13779 IDA-C6 C02 dependent ventilation control Fig. 1 Fig. 2 Fully-automatic ventilation control via integrated, patented C02 sensors. The optoelectronic sensor is completely maintenance-free and does not have to be cleaned regularly. Sensor: • With LED display for CO2 concentration • CO2 output 0-10 V (0-2000 ppm) • Room temperature output 0-10 V (0-40 °C) • Humidity-dependent output 0-10 V (20-100 % humidity) (fig. 1) Control board: • OpenTherm interface (optional) • Input for temperature sensor NTC (frost protection) • 0-10 V input for CO2 sensor/hygrostat • 230 V output e. g. for bypass louver • Operating display/error display (floating contact) • Volumetric flow can be set for 3 stages • Control of fans via 0-10 V output • Fan monitoring via evaluation of tacho signal • Input for safety contact for all pole separation of fan motors (e. g. door contact, pressure switch etc.) • Timer for filter change display
Control of air quality in accordance with DIN EN 13779 IDA-C3 Switching program for ventilation control Pre-set switching program and text-based operator guide on display enable quick set up and safe operation by customer. RAMSES 850 top OT remote control: • Daily and weekly programs • 3 hour power reserve in event of power cut • 2 programs, 1 individual program • Date-controlled program for holiday homes • 2- wire connection (OT Bus) with safety extra-low voltage, reverse polarity protection • Choice of up to six languages • INFO key for viewing important settings and information in plain text • Text line in the display provides a step-by-step guide to programming • Housing with plug-in base, range of versions with differently coloured covers Technical data for control panel, see page 4. RAMSES top2 Available from 2011 5
Page 1 and 2: english OEM Solutions Systems for e
Page 3: Individual customer solutions in ac
Page 7 and 8: Control of air quality in accordanc

OEM Solutions - Theben

Create successful ePaper yourself

Delete template?

Save as template?