Planning manual - Technische Daten

1. Product overview
Product offer
4
Designer Roll-Up Grille
Designer Linear Grille
Important note: Special width
Type Height
DR 15
DR 20
DL 15
DL 20
The installation dimension is the inner width of the recess
for the Designer Grille minus 1 mm of installation gap.
Example: Inner width of the width of the
recess: Designer Grille (net):
200 mm 198 mm
250 mm 248 mm
Inner width of the recess
Width of the Designer Grille (net)
The ordering indication always relates to the inner width
of the recess, e. g. DR 15.200 SB.
15 mm
20 mm
15 mm
20 mm
Inner Width
(Fitting dimesions)
100 mm to 500 mm
100 mm to 500 mm
100 mm to 500 mm
100 mm to 500 mm
Important note: System convectors
Length
1 m to 10 m
1 m to 10 m
1 m to 2.5 m
1 m to 2.5 m
The installation dimension is the outer width of the system
convector or the system trough, respectively.
Example: Outer width of the width of the
system convector: Designer Grille (net):
180 mm 174 mm
260 mm 254 mm
320 mm 314 mm
360 mm 354 mm
410 mm 404 mm
Outer width of the system convector
Width of the Designer Grille (net)
The ordering indication always relates to the outer width
of the system convector, e. g. DR 15.260.
Designer Grille