Yumpu_July Mailer

#SHO001
SHOP PRESS
12 TONNE
HYDRAULIC RAM
FEATURES:
Ideal for pressing bearings, seals and pressed
joints or just to squash/break something.
• 2x Bed Plates
• Solid Frame and Bed
• 12 Tonne Ram / Capacity
• 8x Height Settings and Bed Adjustable
every 100mm in Height
OVERALL DIMENSIONS:
1310mm high, 500mm wide, 500mm deep
1 TONNE ENGINE #ENG001
FOLDING CRANE HOIST
$245
Extensions
Load Capacities:
980mm - 1000kg
1040mm - 750kg
1120mm - 500kg
1200mm - 250kg
FEATURES:
• Fold up legs
• Extendable Mast (1200mm max
extension with 4x settings)
• Max Height 2450mm (Ground - Mast)
• Chain and Hook (300mm long)
• Box Steel Construction
• 4x Cast Iron Wheels
• 3 Tonne Hydraulic Ram
BASIC DIMENSIONS:
Extended: 820mm long, 140mm wide, 40mm thick
Compacted: 310mm long, 185mm wide, 40mm thick
1000LB ENGINE STAND & MOUNT
WITH ADJUSTABLE SWIVEL HEAD
$25
32” SCISSOR
FOLD RIVETING GUN
FEATURES:
• 360 degree Swivel Head
• 4x Adjustable Mounting Fingers
BASIC OVERALL DIMENSIONS:
Rear wheels are 760mm apart
Front wheels are 360mm apart
Front to Back is 750mm
Ground up to the centre of mounting bracket is 780mm
Bottom Leg is 155mm high from the ground to the top of the leg
From leg to centre of mounting hole is 625mm high
FEATURES:
• Working Stroke: 10mm
• Pulling Force: >9000N
• Weight: 2.1kg
• 4x Rivets Muzzles Included:
• 2x 2.4mm diameter
• 1x 3.2mm diameter
• 1x 4.1mm diameter
$189
#PAN100
PANEL LIFTING HOIST/
DRY WALL LIFTER - 68KG
FEATURES:
• Cradle can take a 68kg load (150lb)
• Extendable Mast raises up to 3400mm (11')
• Extendable Cradle fits Panels up to 1220mm x 4880mm (4x16')
• Fold out Tripod Mobile Base with 3x 100mm Heavy Duty Nylon Castors
• Manually Operated via Winding Wheel for Raising and Lowering Control
• Cradle Tilts Forwards and has telescopic extension supports on both sides
Make light work of
engines, transmissions
or anything up to
1000kg. Easily lifts and
lowers heavy objects.
FEATURES:
• 3 Metre Lift
• 1 Tonne/1000kg
• Load Capacity
• Cast Steel Hooks
with Safety Latches
1 TONNE 3M
CHAIN BLOCK
& TACKLE HOIST
WORKSHOP /TOOLS
$229
10 TONNE
HYDRAULIC
BOTTLE LIFTER
FEATURES:
• 2 piece Handle
• Min Height: 200mm
• Screw Extension: 65mm travel
• Max Lift Height: 330mm / 395mm
Screw Fully Extended
TRUNK MOUNT 3 BICYCLE
CARRIER RACK
FEATURES:
• Carries Up To 3 Adult Sized Bicycles
• Weather Resistant Steel Construction
• Rubberized Cradles for Added Grip
• Double Armed for Added Stability
• Folds Flat for Storage
• Mounting Straps Included
• Max Load Capacity:
41kg and maximum of 3 bikes
DIMENSIONS:
1270mm wide
1020mm deep
200mm high
FEATURES:
• Load Capacity: 68kg
DURABLE, WEATHER
• Fits Vehicles with Raised Cross Bars RESISTANT STEEL
• Reduced Wind Resistance and Noise CONSTRUCTION
• Lightweight, Easy To Install and Remove
$179
#CAR030
CEILING MOUNT GARAGE
HOIST STORAGE SYSTEM
FEATURES:
• Safe Rope Locking Mechanism
to Prevent Accidental Release
• Solid Steel Construction with Coated Hooks
• For Use On Ceilings Up To 14' (4.3m)
• 2x 8' Webbed Straps (2.4m x 45mm wide)
• Weight Capacity: 100lbs (45kg)
*Offers effective until the 31st of July 2017. Available while stock lasts or unless otherwise stated.
$39
$29
FEATURES:
• Power: 120W
• Eye Shields
• Twin Tool Rests
• Shaft Diameter: 13mm
• Single Phase 10amp 240 volt NZ Plug
BASIC COMPACTED DIMENSIONS:
285mm wide x 170mm deep x 205mm high
$49
#JAC003-20
20 TONNE HYDRAULIC
BOTTLE LIFTER
FEATURES:
• 2 piece Handle
• Min Height: 230mm
• Screw Extension: 65mm travel
• Max Lift Height: 400mm / 465mm
Screw Fully Extended
BASIC COMPACTED DIMENSIONS:
165mm wide x 145mm deep x 235mm high
Ram: 52mm diameter
$59
5" 125MM ELECTRIC BENCH
GRINDER POWER TOOL
#CAR031
$45
ROOF TOP ALUMINIUM
CROSS BARS
FEATURES:
• 150lbs Load Capacity (68kg)
• 2 x 52" Aluminum Cross Bars (132cm)
• Track Grips Adjustable Up To 48" (122cm)
• 2 Keyed Locks (with keys)
• Allen Key Adjusts (included)
Each bar securely locks with a key
ensuring their security. Fits roof rack
bars up to 122cm apart.
$69