Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Moulding – Forming<br />
Shaping<br />
36 051 000 (4)<br />
Casting mould: knobs<br />
3 motives, 4-5,5cm, size: 23,2x18,3cm<br />
36 053 000 (8)<br />
Screw-set incl. nuts 12-pc.<br />
6xscrews,6xnuts<br />
36 052 000 (4)<br />
Casting mould for deco knobs 18-pc.<br />
6xscrews,6xnuts,6xspacers<br />
2 x Motif rose, 2 x Motif button, 2 x<br />
Motif heart<br />
- Casting mould made of high quality<br />
LDPE<br />
- Food-safe, extreme elastic, frostresistant<br />
and heat-resistant (-15°C<br />
bis 60°C)<br />
- Casting mould is also suitable for<br />
soap, chocolate or ice<br />
Once infected with the deco-knob<br />
fever you will not stop to create<br />
new ones!<br />
And you don't need to go to the DIY<br />
market to buy the screws and nuts,<br />
you can get anything you need at<br />
Rayher.<br />
Placers and casting moulds are existing,<br />
with the replacement kit you<br />
can create 6 more knobs.<br />
To create six deco knobs you need:<br />
Casting mould item 36 051 000<br />
Jewellery cement item 34 166 000<br />
Casting mould item 36 052 000<br />
34 238 000 (4)<br />
Metal shelves construction kit "Vintage"<br />
11-part<br />
34 237 000 (4)<br />
Metal shelves construction kit "Classic"<br />
11-part<br />
- for 3-steps shelves<br />
- suitable for moulding with creative cement or Raysin<br />
- Content: 3 metal rods, 7 protective panels, end-screw, instructions<br />
36 068 000 (4)<br />
Flow and glass drill, 6mm ø<br />
Drill for shelves<br />
The glass drill was adapted to the specific<br />
properties of glass and ceramics. The cutting<br />
edge geometry is constructed in such a way,<br />
that problem-free drilling of these hard and<br />
brittle materials is executable. Thus also ideal<br />
for the cement and raysin.<br />
- Can only be used as a machine drill.<br />
- The horizontal drilling is advantageous<br />
for the wear behaviour of the drill and the<br />
quality of the bore.<br />
- The item to be drilled should be positioned<br />
evenly and held firmly.<br />
- If a hammer drill should be employed by<br />
drilling, the impact mechanism has to be<br />
switched off!<br />
Made in Germany<br />
34 239 000 (4)<br />
casting mould: round shelf<br />
Depth 1cm , 3-part, ø25cm, ø18,5cm, ø13<br />
- 3-part casting moulds set<br />
- for moulding of 3-tier cake stand<br />
- ideally suited for creative-cement<br />
or Raysin<br />
- casting moulds sizes: 25cm / 18.5<br />
cm / 13 cm / each 1cm deep<br />
- casting moulds out of a highlytransparent,<br />
stable PET<br />
43
Change language