You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Standard</strong> Material<br />
31 572 000 (5)<br />
Transfer foil A4<br />
210x297mm, tab-bag 1sheet<br />
Transfer foil<br />
This foil is great for candles and also for smooth, non-absorbent surfaces in order to<br />
make quickly effective results. Imprint the motif non-reversed on the shiny side of the<br />
transfer foil and lay it for about 30-60 seconds in lukewarm water until the release paper<br />
from the foil begins to dissolve, then transfer it on the candle.<br />
It can be used only for laser printer/laser copier (max. fixation temperature of the drum<br />
cylinder is 170˚C) and for paper thickness of about 185 g/m2.<br />
Colour choice<br />
31 020 ..<br />
31 104 00 (5)<br />
Transfer wax plate, 20x10 cm<br />
tab-bag 2 pcs.<br />
31 020 (5)<br />
Writing foil for decorative wax<br />
tab-bag 1 pce. (10x15 cm)<br />
See colour choice 06<br />
gold<br />
22<br />
silver<br />
Transparent wax sheet<br />
The transparent wax sheet offers many possibilities for creation<br />
of nice candles. It’s perfect for stamping-on, for combining<br />
with wax-liner, napkin technique and much more.<br />
Place the motif under the transparent wax sheet and draw<br />
later on with the candle paint (item no.38437000) or with<br />
the All Purpose paint (item no.38000ff). Subsequently, the<br />
processed transparent wax sheet is placed onto the candle<br />
and pressed by hand’s warmth. It can be later sealed as<br />
desired with candle-varnish.<br />
Tip: With the wax-liner, you can achieve great results while<br />
mixed in a ratio of 1:1 with the candle paint.<br />
Write-on film for decorative wax<br />
Thanks to the write-on film, the candles or the decorative<br />
wax sheets are directly writable. Afterwards,<br />
pressed onto the candle by hand’s warmth. The metallic<br />
side of the write-on film is used for the writing with<br />
pencil, pen or embossing-pen. The film thus remains<br />
adhering to the selected substrate. The candles should<br />
not be varnished before processing.<br />
272