Price Louver - Globalmech

LOUVERS
4
Non-Drainable
JE443 / ZE445
JE443 ZE445
Louver Model JE443 ZE445
Material Extruded Aluminum
(Alloy 6063-T5)
Ratings do not include the effect of a bird screen.
Extruded Aluminum
(Alloy 6063-T5)
Stationary Blade .081" (2 mm) .081" (2 mm)
Frame .081" (2 mm) .081" (2 mm)
Louver Depth 4" (102 mm) 4" (102 mm)
Blade Angle 43 o 45 o
Performance Rating
Standard
AMCA
Standard 500
AMCA
Standard 500
Wind Load 25 psf (100 mph) 25 psf (100 mph)
Free Area –
4' x 4' Unit
8.1 sq.ft.
(0.753 sq.m.)
Percent Free Area 50.6% 49.5%
Free Area Velocity at
Beginning Point of
Water Penetration (1)
Air Volume Delivered at
Beginning Point of
Water Penetration (1)
Pressure Drop at
Beginning Point of
Water Penetration (1)
642 FPM
(196 m/min)
5,200 CFM
(147 m 3 /min)
0.07” H2O
(18 Pa)
7.92 sq.ft.
(0.736 sq.m.)
669 FPM
(204 m/min)
5,298 CFM
(150 m 3 /min)
0.09” H2O
(23 Pa)
E.H. Price Limited certifies that
the JE443 and the ZE445 shown
herein are licensed to bear the
AMCA Seal. The ratings shown
are based on tests and procedures
performed in accordance with
AMCA Publication 511 and comply
with the requirements of the AMCA
Certified Ratings Program. The
AMCA Certified Seal applies to air
performance ratings and water
penetration ratings.
(1) Beginning point of water penetration is defined by AMCA standard 511 as the
free area velocity at which 0.01 ounces of water per square foot of free area is
measured to pass through a 4' x 4' louver during a 15 minute test.
All Metric dimensions ( ) are soft conversion. © Copyright E.H. Price Limited 2006.
Imperial dimensions are converted to metric and rounded to the nearest millimetre.