Cupra Cable Terminals and Accessories

BW BRASS GLAND
BW GLAND FOR SWA CABLE
To BS 6121: Part 1
Suitable for single wire armoured, plastic or rubber sheathed cables
Application – for use in dry, indoor situations
Low cost two part design
Shroud may be used for additional ingress protection
IP 54
Finish: Natural Brass and also available in Electro Tinned and Nickel
Threads: Entry threads are metric to BS 3643 and are also available in Imperial (ET)
Also available in Aluminium (BS 1474) cable glands
COMP.
NO.
SIZE
CABLE DIMENSIONS
ACCOMODATED
DIAMETER
OVERALL
UNDER
ARMOUR
B
ISO ENTRY
ARMOUR
THREAD
WIRE
DIAMETER DIA. LENGTH
GLAND DIMENSIONS
APPROX.
LENGTH
FROM
SHOULDER
HEXAGON SIZE
ACROSS
FLATS
ACROSS
CORNERS
A MAX. MAX. C D E F G H
mm mm mm mm mm mm mm mm
CTGB-16 16 8.60 13.50 0.90 16 10 21.00 20.00 23.00
CTGB-20S 20S 12.50 17.00 0.90 / 1.25 20 10 21.00 23.00 25.50
CTGB-20 20 14.40 20.50 0.90 / 1.25 20 10 23.00 25.00 27.30
CTGB-25S 25S 17.80 23.80 1.25 / 1.60 25 10 24.00 31.00 34.00
CTGB-25 25 20.40 27.00 1.25 / 1.60 25 10 26.00 34.30 38.50
CTGB-32 32 26.50 33.00 1.60 / 2.00 32 10 26.00 41.50 46.50
CTGB-40S 40S 31.00 37.00 1.60 / 2.00 40 15 30.00 45.00 50.00
CTGB-40 40 32.50 40.80 1.60 / 2.00 40 15 30.00 49.00 54.00
CTGB-50S 50S 37.80 48.00 2.00 / 2.50 50 15 32.00 58.00 65.00
CTGB-50 50 44.00 53.50 2.00 / 2.50 50 15 32.00 62.30 69.50
CTGB-63S 63S 50.50 60.50 2.50 63 15 35.00 70.00 78.00
CTGB-63 63 56.50 65.50 2.50 63 15 36.00 76.30 85.00
CTGB-75S 75S 62.50 72.00 2.50 75 15 40.00 85.00 95.00
CTGB-75 75 67.50 78.50 2.00 / 2.50 75 15 41.00 90.50 99.00
CTGB-90 90 80.00 94.00 3.15 90 20 42.00 112.00 125.00
Note:
1. For PVC Gland, add 'P' at the end of the part number.
2. For Aluminium Gland, add 'A' at the end of the part number.
Cupra Cable Terminals and Accessories 39