24.09.2017 Views

jdsFullCatalog (NXPowerLite Copy)

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

JDS Engraving Industries, Materials Inc. & Supplies<br />

Lazer Dark Laser Color Spray<br />

JDS Industries, Inc.<br />

LazerDark aerosol spray is a semi-transparent coloring spray for enhancing<br />

and coloring the laser engraved area on most types of wood.<br />

Case Qty: 1<br />

• Quick & Easy To Use<br />

• Permanent & High Contrast Marking<br />

• Virtually No Wicking for a Clean Fill<br />

made in the<br />

USA<br />

JDS Industries, Inc.<br />

C<br />

LDK200<br />

LazerDark<br />

Clear Finish Coat<br />

9 oz. Aerosol Can<br />

LDK201<br />

LazerDark<br />

Dark Brown<br />

11 oz. Aerosol Can<br />

LDK202<br />

LazerDark<br />

Black<br />

11 oz. Aerosol Can<br />

LDK203<br />

LazerDark<br />

White Glaze<br />

11 oz. Aerosol Can<br />

LDK204<br />

LazerDark<br />

Gold Glaze<br />

11 oz. Aerosol Can<br />

Engraving Materials & Supplies<br />

LDK205<br />

LazerDark<br />

Silver Glaze<br />

11 oz. Aerosol Can<br />

LDK206<br />

LazerDark<br />

Red Glaze<br />

11 oz. Aerosol Can<br />

LDK207<br />

LazerDark<br />

Blue Glaze<br />

11 oz. Aerosol Can<br />

LDK208<br />

LazerDark<br />

Green Glaze<br />

11 oz. Aerosol Can<br />

LDK209<br />

LazerDark<br />

Yellow Glaze<br />

11 oz. Aerosol Can<br />

LDK202<br />

LazerDark<br />

Black<br />

11 oz. Aerosol Can<br />

Applying LazerDark<br />

1. Apply laser masking to plaque (see page 606 for laser masking).<br />

2. Laser plaque.<br />

3. Apply one medium coat of LazerDark color spray per instructions on can. Allow 1-3 min to dry.<br />

4. Repeat as necessary until desired coverage is achieved.<br />

5. Apply one light to medium coat of LazerDark Clear Finish Coat per instructions on can. Allow 10-15 min to dry.<br />

6. Remove laser masking.<br />

Clean up<br />

1. Immediately after use, clean the nozzle by inverting the can and spraying until the mist becomes clear.<br />

Nozzle can be removed and soaked in paint thinner if spraying difficulty is encountered or nozzle becomes clogged.<br />

Tips:<br />

• For best results, spray at normal room temperature, 68º - 78º F.<br />

• For easier laser masking removal, remove within an hour of application.<br />

For more information, visit our YouTube channel at<br />

www.youtube.com/JDSINDUSTRIES, visit our website at<br />

www.jdsindustries.com or contact us at 800-843-8853<br />

475<br />

Your Recognition & Personalization Partner

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!