Flyer_Give me five_EN

GIVE ME FIVE!
SPECIAL UMC-750
OFFER!
Haas Automation
FIVE good reasons to go ahead with ESPRIT!
FIVE Axis simultaneous and positioning software
FIVE Axis certified UMC-750 Post-Processor
FIVE thousand € package price
FIVE hundred € for yearly upgrade and yearly support each
FIVE thousand € more for all milling machines
When the HAAS UMC-750 enters your factory, ESPRIT is ready to rock - Take advantage of it !
DP Technology Europe
672 rue du mas de Verchant
34000 Montpellier
France
Tel +33 46764 99 40
Fax +33 46764 99 41
esprit.europe@dptechnology.com
DP Technology Germany
Kirschäckerstr, 23
96052 Bamberg
Deutschland
Tel +49 951 299 526-0
Fax +49 951 299 526-29
esprit.germany@dptechnology.com
DP Technology Italy
Via Iacopo Nardi, 2
50132 Firenze
Italy
Tel +39 055 234 22 86
Fax +39 055 234 38 00
esprit.italy@dptechnology.com
DP Technology Corp.
1150 Avenida Acaso
93012 Camarillo (CA)
USA
Tel +1 805 388 6000
Fax +1 805 388 3085
esprit@dptechnology.com

FIVE good reasons to go ahead with ESPRIT CAM software !
FIVE Axis simultaneous and positioning software
Give Me Five is the perfectly adapted tool to program your
New UMC-750. ESPRIT long-time experience in complex and
production machining will bring you at the best level to beat
your competition !
This HAAS-ESPRIT offer gives you access to the complete ESPRIT
professional package for an incredible price. It includes ALL
necessary tools to take advantage of the movements of your new
machine-tool. See this impressive list :
FIVE Axis certified UMC-750 Post-Processor
Give Me Five includes a specific 5 axis Post-Processor, attached
and limited to UMC-750, including machine model and setup
for Solid Simulation. Upgrade to regular ESPRIT License
will be needed to program other milling machines. Upgrade
to more ESPRIT software will be needed to program lathes
or EDM machines and to have access to specific cycles like
ProfitMilling, of dedicated functions for blades, impellers,
blisks, and port machining.
Your ESPRIT Give Me Five will come with a set of two fully
programmed parts for the last version of ESPRIT for this
machine showing 4 & 5 axis indexing and 3D plus 5 axis
simultaneous machining in order to help you through your
first steps on your new UMC-750.
FIVE thousand € package price
Your HAAS Factory Outlet is giving you a unique chance to
program your new UMC-750 with the best CAM of the market
at the best price ever. The normal value of such solution is
almost 20,000€ but HAAS and ESPRIT came to a commercial
and technical agreement that focuses on the UMC-750 only and
limits the cost of the offer.
Give Me Five brings you immediate productivity thanks to its
all-new certified Post processor, and realistic Machine Set-Up
that simulates your work on the machine within ESPRIT. No
more dry-run, no more never-ending fine-tuning of your post
processor !
FIVE hundred € for yearly upgrade + FIVE hundred €
for yearly support
GiveMe Five can be placed under an update contract in order
to protect your long-term investment and insure delivery of the
latest version of ESPRIT.
Base license - 2D/3D, NURBS and Parasolid modeler, Adaptive feature recognition, Cutting
tool and Speed and Feed KnowledgeBase, Solid simulation and verification, Native file
readers for ACIS, DXF, IGES, Parasolid (X_T, X_B), VDA; Feature Exchange (FX) for Inventor,
Solid Edge and SolidWorks.
SolidMill Traditional - 2 1/2-axis milling machining cycles: Facing, Pocketing, Contouring,
Drilling, Spiraling, Thread Milling, Manual Mil- ling, Engraving, Rest Machining, Wireframe
Milling.
Rotary Machining - 4th axis rotary machining add-on to all milling 3-Axis machining
cycles. Plus Wrap Pocketing, Wrap Contouring, Wrap Drilling
FreeForm 3 axis - 3-axis milling FreeForm machining cycles; Roughing, Variable
Z-Roughing, Parallel, Planes Finishing, Z-Level Finishing, Radial Finishing, Spiral Finishing,
Floor Finishing, Re-Machining, Pencil Tracing, Corner Finishing, Contouring, Concentric
Finishing, Between Curves Finishing and Projection Finishing.
FreeForm 5 axis - 5-axis milling FreeForm machining cycles; Ruled Swarf Milling, Surface
Swarf Milling, Contour Milling, Composite, Roughing, Profit Milling, Trochoidal Roughing,
Channel Machining. 5-Axis Auto-Tilt, 5-axis Finishing and Project Finishing.
FIVE thousand € more for all milling machines
Give Me Five is not a limited solution, and you can sooner or later
take advantage of the unlimited possibilities of ESPRIT. Wether
you wish to use your license to program other Milling machines, or
decide to expand your license to Turning, Mill-Turn, or EDM, Give
Me Five can be be upgraded to the regular ESPRIT license.
It can then be connected to your other Machine-Tool and program
seamlessly any brand for any job. ESPRIT Authorized Resellers can
provide you with upgrade for 5,000€, and will define with you which
Post-processors, or Software modules you need to be productive
with every Machine in your factory.
Web or phone Hot Line and Support services are a must to
rapidly be effective, and to be helped for more complex or rare
situations. A good level of assistance will provide you with the
needed security to be successful in the 5-axis world with your
UMC-750.
This package is to be contracted from ESPRIT Authorized
Resellers for €1,000 per year. This also is a bargain: regular
ESPRIT Maintenance contracts value for such installation is
almost €3,000.
DP Technology Europe
672 rue du mas de Verchant
34000 Montpellier
France
Tel +33 46764 99 40
Fax +33 46764 99 41
esprit.europe@dptechnology.com
DP Technology Germany
Kirschäckerstr, 23
96052 Bamberg
Deutschland
Tel +49 951 299 526-0
Fax +49 951 299 526-29
esprit.germany@dptechnology.com
DP Technology Italy
Via Iacopo Nardi, 2
50132 Firenze
Italy
Tel +39 055 234 22 86
Fax +39 055 234 38 00
esprit.italy@dptechnology.com
DP Technology Corp.
1150 Avenida Acaso
93012 Camarillo (CA)
USA
Tel +1 805 388 6000
Fax +1 805 388 3085
esprit@dptechnology.com