ACES Abu Dhabi - Prequalification

Arab Center for Engineering Studies-
Abu Dhabi, UAE
COMPANY
PROFILE
SEPTEMBER 2016

TABLE OF CONTENTS
Page
SECTION 1 - Introduction ....……………....................................................... 1
SECTION 2 - ACES VISION, MISSION, VALUES, SLOGAN &
QUALITY POLICY ....................................................……….. 2-3
SECTION 3 - ACES SERVICES …………………......................................... 4
3.1 Site & Geotechnical Investigation ......................................... 5
3.2 Materials Technology and Testing ........................................ 6
3.3 Quality Control Projects ........................................................ 7
3.4 Special Studies & Projects .................................................... 8
3.5 Land and Marine Surveying .................................................. 9
3.6 Geophysical Investigation and Testing.................................. 10
3.7 Environmental Sampling, Monitoring and Testing...………… 12
SECTION 4 - LICENSES AND REGISTRATIONS ........................................ 13
SECTION 5 - ACES FACILITIES ..........................................................…….. 15
5.1 Main Drilling, Sampling & Testing Facilities ............................ 15
5.1.1 Drilling Rigs …………………………………….……. 15
5.1.2 Offshore Investigation …………………………….… 15
5.1.3 Soil Investigation Field Testing Equipment & Tools .. 16
5.1.4 Geophysical Testing Facilities ……………………….. 16
5.1.5 In-situ Foundations Monitoring and Testing..………. 17
5.1.6 Land and Marine Surveying Instruments…………… 17
5.1.7 Evaluation of Existing Structures & Pavements …... 18
5.1.8 Environmental Sampling and Testing ….…………… 18
5.2 Major Laboratory Testing Facilities …………………………….. 19
5.2.1 Soil, Rock & Aggregate …………………………………… 19
5.2.2 Concrete Testing ……………………………………….. 19
5.2.3 Metallurgical Testing ………………………………….. 20
5.2.4 Cement Testing …………………………………………. 20
5.2.5 Asphalt Testing ……………………………………………. 20
5.2.6 Geotextile, Membrane, GRP & Plastic Testing ……….. 21
5.2.7 Chemical Analysis ……………………..…………………. 21
5.2.8 Microbiological Analysis …………………………………. 21
5.3 Other Testing Facilities ……………………………………………. 22
SECTION 6 - ACES PERMANENT MANPOWER..............................………. 22
6.1 Partners & Directors ………………………….......................... 22
6.2 ACES Abu Dhabi Key Staff ………………..… ……………… 22
SECTION 7 - ACES MAJOR CLIENTS..............................…………..………… 27
APENDICES
App. A - ACES ORGANIZATION CHARTS
App. B - ACES CERTIFICATES & LICENSES
TOC,Page 1/1

SECTION 1 - INTRODUCTION
ARAB CENTER FOR ENGINEERING STUDIES
(ACES)
Arab Center for Engineering Studies -ACES, was established in Amman-Jordan in the year
1983. Eleven sister companies were subsequently established, Abu Dhabi being the first foreign
branch established in 1989. Other sister companies are located in Al Ain, Dubai, Muscat, Doha,
Amman, Aqaba, Riyadh, Jeddah, Khoubar & Madina.
ACES provides specialized consulting services in the fields of Site & Geotechnical Investigation,
Materials Technology and Testing, Special Studies and Projects, Quality Control of Civil
Projects, Environmental Sampling & Testing and Land and Marine Surveying. The services of
ACES can be provided in all phases of design and construction of projects. These services may
be custom tailored to fit the needs of the project and its owner and can be provided either
individually or as a complete package.
Ever since ACES was founded in 1983, the top management has been determined and committed
to provide customer driven, reliable, accurate, cost effective, high value added, and quality
technical services. Subsequently, ACES went full speed ahead to establish itself in Jordan, UAE,
Qatar, Palestine, Saudi Arabia, Sudan, Yemen & Iraq markets and became known for its integrity
and its dependable, stable, responsive, and accurate quality services through long term
partnership with its customers. This development and good reputation has given ACES impetus
to grow in size, number of colleagues, sales, facilities, etc. and to establish itself among the
leading engineering organizations in the Middle East. ACES is equipped with staff of highly
qualified and experienced professional engineers in addition to highly skilled and trained
laboratory technicians, chemists and drillers.
ACES has reached out stellar achievements in the endless universe of Quality Management and
Business Excellence:
ISO/IEC 17025-2005 Accreditation Certificate,
ACES Abu Dhabi was accredited by IAS (USA) since July 2011 and by ESMA (UAE) since
November 2013. This, in addition to many other ACES branches which are also accredited to
ISO/IEC 17025-2005.
ISO 9001-2008 Certificate of Approval,
Certified to ISO9000 standards by BVQI since 1998.
Sheikh Khalifa Excellence Award (2001-2002) and (2003-2004) ,
Quality Appreciation Certificates, April’2002 and May’2004- Abu Dhabi, UAE
King Abdullah II Award for Excellence (2000 and 2009 ),
Award in Service Sector (Small and Medium Size Organizations), 25.02.2001 and 04.05.2009 -
Amman, Jordan
Dubai Quality Award (2000),
Certificate of Appreciation, 02.02.2001- Dubai, UAE
Reaching these distinguished and prestigious achievements, reflects the solid commitment of
ACES in implementing the principles and key elements of the total quality management for all
services provided to their clients, and their pursuit to reach advanced levels of performance
excellence through continual improvement. Thus ACES have been recognized as a benchmark of
high quality services and management and business excellence.
Page 1 of 27

SECTION 2 - ACES VISION, MISSION, VALUES, SLOGAN & QUALITY POLICY
VISION
To be the leader in the fields of activities in the markets of
operations.
MISSION
To provide reliable, timely, accurate, cost effective and quality
specialized engineering services that meet customer expectations.
VALUES
Commitment to customer satisfaction.
Commitment to employee satisfaction.
Professional integrity.
Innovation.
Pride in organization.
Contribution to the well being of the society.
Contribution to the preservation of the environment.
SLOGAN
Partners for Quality Construction.
Page 2 of 27

QUALITY POLICY
Arab Center for Engineering Studies (ACES) aims to:
Satisfy the needs of its customers by providing accurate, reliable, timely and cost
effective services, which are undertaken to a high professional standard and integrity.
Provide services which are always carried out in accordance with stated standardized
methods and customers’ requirements.
Ensure that its reputation for quality of its services is continually enhanced.
To achieve those aims, ACES has developed and shall implement an effective continually
improved Quality Management System complying with the requirements of ISO 9001-2008,
ISO/IEC 17025-2005 and the principles of business excellence.
ACES personnel shall familiarize themselves with quality system documentation and
implement the policies and procedures in their work.
Top management and employees of Arab Center for Engineering Studies are strongly
committed to full adherence to ACES quality policy.
Eng. Yousef Al Marei
Regional General Manager
ACES – UAE & Oman
Page 3 of 27

SECTION 3 - ACES SERVICES
The services which are provided by ACES may be summarized as follows:
3.1 Site & Geotechnical Investigation
On-Shore
Off-Shore
3.2 Materials Technology & Testing
3.3 Quality Control of Projects
3.4 Special Studies & Projects
3.5 Land & Marine Surveying
3.6 Geophysical Investigation and Testing
3.7 Environmental Sampling, Monitoring and Testing
Page 4 of 27

SECTION 3 - ACES SERVICES
3.1 Site And Geotechnical Investigation
The site and geotechnical investigation department has carried out investigations for
thousands of diverse projects and clients in the Middle East. Regardless of the size of the project,
all ACES projects are approached with the expertise, technology and equipment required to meet
the client’s needs.
ACES maintains modern drilling, soil-rock sampling, field and laboratory testing
equipment in conformance with relevant standards.
The scope of services of the site and geotechnical investigation department is:
1. On-shore & off-shore drilling.
2. Field testing and geotechnical sampling.
3. Soil and rock laboratory testing.
4. Geotechnical studies for various types of structures, such as buildings, roads, dams, and
retaining structures.
5. Geological survey including geological and geotechnical mapping.
6. Investigation, monitoring and analysis for slope stability.
7. Geophysical studies.
8. Installation and monitoring of field geotechnical instrumentation.
9. Comprehensive services for quality control, supervision, verification for geotechnical
work i.e. drilling, CPT, excavation, slope stability monitoring, ground improvement ..etc.
10. Factual and interpretative geotechnical reporting.
Page 5 of 27

3.2 Materials Technology and Testing
SECTION 3 - ACES SERVICES
The materials technology and testing department covers a wide range of specialized services
which extend from routine testing of construction materials to consultation on technical issues
related to materials technology and its application.
Equipped with modern field and laboratory testing equipment satisfying the relevant
international standards and specifications (i.e. BS, BS-EN, ISO, ASTM, etc.) in the field of
concrete, bitumen and asphalt mixes, soil and rock, aggregate and stone, steel reinforcement and
building components, chemical analysis and water analysis, and non destructive testing and loading
of structures, this department has carried out over the years thousands of tests serving the needs of
both public and private sectors.
The scope of services of the materials technology and testing department are:
1. Materials Technology.
2. Asphalt and concrete mix design.
3. Physical, mechanical and chemical testing of:
Concrete.
Soil and rock.
Aggregate and stone.
Water.
Bitumen and asphalt mixes.
Steel Reinforcement
Building components
Coatings
Manhole Covers
Other Special Construction Materials
4. Non-Destructive testing and loading of structures.
5. Testing and evaluation of existing structures.
6. Specialist Testing Services:
Low Strain Integrity Testing of Piles
High Strain Dynamic Testing of Piles
Pile Shape analysis
Piles Cross Hole Sonic Logging
Piles Shaft Caliper Logging
Supervision of Piles Static Load Test
Pile Instrumentation
Inclinometer
Settlement Monitoring
Temperature Monitoring of Concrete
7. Consultation on construction materials and quarrying.
8. Metallurgical Testing.
Page 6 of 27

SECTION 3 - ACES SERVICES
3.3 Quality Control of Projects
The quality control of projects is one of the major activities of ACES, which has been
pioneered in Jordan several years ago and is gaining popularity with owners, engineers and
contractors. ACES has implemented quality control programs for major projects in UAE, Qatar
and Jordan such as hotels, hospitals, thermal power plants, highways, large fuel tanks, dams,
precast factories and other major industrial projects. ACES maintains several sets of laboratory
equipment and logistics in order to establish site laboratories of various scope, size and capacity.
The scope of services of quality control of projects is:
1. Design and implementation of quality control programs for construction projects.
2. Supply testing equipment, logistics and staff and management of site laboratories.
3. On site materials testing.
4. Preparation of periodic quality control and statistical analysis reports.
5. Design and implementation of quality control programs for manufacturing facilities such
as:
Ready mix concrete plants.
Precast units plants.
Concrete additives
Asphalt production plants.
Blocks and tiles factories.
Building materials factories.
Manufacturing plants.
6. Calibration of asphalt and concrete batch plants.
7. Evaluation of materials quality utilizing statistical techniques.
8. Preparation of technical specifications for materials.
Page 7 of 27

SECTION 3 - ACES SERVICES
3.4 Special Studies & Projects
ACES provides special studies services for a wide range of projects with an open-ended
scope in construction problem solving activities. ACES employs highly qualified specialists in
highways, pavement, structural, chemical, materials and geotechnical engineering and utilizes state
of the art equipment for destructive and non-destructive testing for this purpose. ACES has
conducted this specialized work in several countries in the Middle East and in Asia.
Special studies scope of services includes but is not limited to:
1. Non-destructive testing of reinforced concrete structures.
2. Instrumentation and monitoring of structures.
3. Evaluation of condition and damage of existing structures.
4. Studies, design and supervision of temporary and permanent earth retaining structures.
5. Studies, management and supervision of major excavations.
6. Consultation on the design of dams, water structures and special foundations.
7. Consultation on drainage and dewatering systems.
8. Studies and design for rehabilitation, maintenance and repair of structures.
9. Evaluation of fire damaged structures and design of repair.
10. Pavement evaluation for highways and airports.
11. Consultation and research related to special problems in construction projects.
Page 8 of 27

SECTION 3 - ACES SERVICES
3.5 Land & Marine Surveying
ACES provide its clients with land and marine survey solutions that enable them to make strategic
decisions for their projects.
With complete in-house facilities and state of the art equipment, specialized software and highly
qualified survey engineers and surveyors, ACES is becoming one of the leaders in the field of land and
marine surveying in the region.
The scopes of services offered by Survey Department are:
Topographic Survey.
Near Shore Bathymetric Surveys.
Cadastral Surveys.
Corridor Alignments (Horizontal & Vertical) and Profiles.
Setting Out Surveys.
Under Ground Utilities Surveys.
As-Built Surveys
Digital Terrain Modeling.
Establishment of Control Stations and Bench Marks.
Precise and Differential Leveling.
Settlement Monitoring.
Earthworks Volumes Calculations
Survey Consultancy and Check Engineering.
Hiring of Survey Crews.
Maps Digitizing and conversion of Raster to Vector.
Hydrographic Survey.
Bathymetric Survey.
Tidal Measurements.
Current Measurements.
Sea water sample collection and in-situ testing.
Page 9 of 27

SECTION 3 - ACES SERVICES
3.6 Geophysical Investigation and Testing
ACES geophysical services has been offered to several major projects in many places in the Middle East
including Jordan, KSA, Qatar, Oman, Bahrain, Kuwait and UAE. ACES has become one of the most
reliable suppliers for geophysical services in the region.
ACES has state of the art geophysical equipment obtained from worldwide reputable suppliers who offer
technical training and consulting advice which enhances our practices for best satisfaction to our client’s
needs. Furthermore, ACES strong background in geotechnical drilling and engineering geology provides
great support and completeness to the interpretation and verification of the geophysical findings.
The geophysical staff of ACES consists of highly qualified and experienced Engineers and Technicians.
The scopes of services offered by Geophysics Department are:
1. Surface Geophysics
1.1 Electrical Resistivity Methods
Electrical Resistivity Tomography (2D&3D-ERT)
Vertical Electrical Sounding (VES)
Induced Polarization (IP)
1.2 Seismic Methods
Spectral Analysis of Surface Waves (SASW)
Multi-Channel Analysis of Surface Waves (MASW)
Seismic Refraction Tomography (SRT)
Vibration Monitoring
1.3 Ground Penetration Radar (GPR)
100MHz Antenna
200MHz Antenna
270MHz Antenna
400MHz Antenna
2,000MHz Antenna (Concrete & Rebar’s)
1.4 Micro-Gravity (MG)
1.5 Electromagnetic Methods
Page 10 of 27

2. Borehole Geophysics
2.1 Borehole Seismic Surveys
Standard Cross Hole Seismic Test
Down Hole Seismic Test
Full Wave Form Sonic Logging
PS Suspension Logging
Seismic Dilatometer Testing (SDMT)
Seismic Cone Penetration Testing (SCPT)
2.2 Borehole Seismic Tomography Surveys
Cross Hole Seismic Tomography
Single Hole Seismic Tomography
Parallel Seismic Test (P.S.T)
2.3 Borehole Geophysical Logging
Fluid Temperature
Fluid Resistivity/Conductivity
Three Arm Caliper
Impeller flow meter
Gamma-Gamma
Natural Gamma
Electrical Resistivity
Spontaneous Potential
Deviation (Verticality)
Acoustic Televiewer Logging
3. Marine Geophysics
Marine Electrical Resistivity Tomography (ERT)
Sub-bottom Profiler Survey (Seismic Reflection)
Marine Magnetic Survey
Side Scan Sonar Survey
Single-beam Echo Sounder
Multi-Beam Echo Sounder
Marine Hydrographic Survey
ADCP
Tide Gage
Page 11 of 27

SECTION 3 - ACES SERVICES
3.7 Environmental Sampling, Monitoring and Testing
ACES provide its Clients with environmental solutions that enable them to make strategic decisions for
their projects. With its state of the art sampling, monitoring and testing equipment and highly qualified
staff, ACES is well positioned among the leaders in the area of environmental sampling, monitoring and
testing services.
The scope of environmental related services includes:
Investigation of potentially contaminated sites for the extent of contamination to land and ground
water for the purpose of Environmental Baseline Studies / Environmental Impact Studies:
- Drilling of boreholes by various drilling techniques to preclude contamination from
drilling fluids and/or cross contamination.
- Installation and development of piezometers, water level measurement by depth meters
and monitoring by level loggers.
- Land Gas Measurement
- LNAPL interface measurement.
- Sampling of soils and ground water.
- In situ VOC screening, water analysis & gas measurement.
- Laboratory analysis of encountered samples for complete suite of environmental
contaminants.
- Monitoring of Ambient Air Quality and Noise Surveys.
- Preparation of reports by using different data presentation methods, including AGS.
Control of quality of drinking water.
Testing for environmental discharge permits of Waste Water, Recycled Water, Hazardous Waste,
Industrial Waste.
Testing of soils for agricultural & landscaping purposes and water for suitability for irrigation.
Characterization of outdoor and indoor air quality and evaluation of human exposure concerns.
Noise surveys.
Sample pickup and delivery, preparation of sample containers.
Page 12 of 27

SECTION 4- LICENSES AND REGISTRATIONS
LICENSES AND REGISTRATIONS OF
ARAB CENTER FOR ENGINEERING STUDIES (ACES)
ABU DHABI
ACES Abu Dhabi is registered by Department of Economic Development with License No.
1001759 since 10.10.1996 and Chamber of Commerce and Industry with Membership No. 11900 in
the field of geotechnical engineering, testing of construction materials and preparation and services for
oil and gas fields onshore and offshore and surveying services.
ACES Abu Dhabi is registered with Emirates Standardization and Metrology Authority (ESMA).
ACES Abu Dhabi is registered with Abu Dhabi Environment Authority (EAD).
ACES Abu Dhabi has the following registrations with Oil Companies & Governmental Organisations.
Registrations with Oil Companies & Governmental Organisations
S.No.
1
2
3
4
ADNOC
COMPANY NAME
ABU DHABI CO. FOR
ONSHORE OIL OPERATIONS
(ADCO)
ABU DHABI GAS
LIQUEFACTION CO. LTD.
(ADGAS)
ABU DHABI MARINE
OPERATING CO. (ADMA-
OPCO)
ABU DHABI NATIONAL OIL
CO. (ADNOC)
REGISTRATION
No.
C 2224
55
10324
750124
DETAILS OF / SERVICES
PREQUALIFIED
Marine Surveys
Onshore Surveys
Soil Investigation-Offshore
Soil Investigation-Onshore
Concrete Rehabilitation Studies
Material Testing – Civil
Soil Testing
Cartographics - Topography
Onshore Surveys
Soil Investigation-Offshore
Soil Investigation-Onshore
Concrete Rehabilitation Studies
Material Testing – Civil
Soil Testing
Laboratory Services (Chemical
Testing). Intermediate
Marine Surveys
Onshore Surveys
Soil Investigation-Offshore
Soil Investigation-Onshore
Concrete Rehabilitation Studies
Material Testing – Civil
Material Testing –Mettalurgical
Material Testing – Painting/ Coating
Soil Testing
Cartographics - Topography
Page 13 of 27

Registrations with Oil Companies & Governmental Organisations (Cont’n.)
S.No.
5
6
7
8
9
ADNOC
COMPANY NAME
ABU DHABI OIL REFINING CO.
(TAKREER)
ABU DHABI GAS INDUSTRIES
LTD. (GASCO)
ABU DHABI POLYMERS CO.
LTD (BOROUGE)
RUWAIS FERTILIZER
INDUSTRIES (FERTIL)
ABU DHABI WATER &
ELECTRICITY AUTHORITY
(ADWEA)
REGISTRATION
No.
750124
750124
134962
44792
002644
DETAILS OF / SERVICES
PREQUALIFIED
Soil Investigation-Offshore
Soil Investigation-Onshore
Concrete Rehabilitation Studies
Material Testing – Civil
Soil Testing
Soil Investigation-Offshore
Soil Investigation-Onshore
Concrete Rehabilitation Studies
Material Testing – Civil
Soil Testing
Concrete Rehabilitation Studies
Environmental (Base Line Studies)
Environmental Engg (Pollution
Control)
Geological Reports
Geotechnical Reports
Soil Investigation
Testing Laboratories
Surveying Concrete Condition
Marine Surveys
Onshore Surveys
Soil Investigation – Offshore
Soil Investigation – Onshore
Environmental Related Works
(Pollution Control/Monitoring Etc.)
Material Testing –Civil
Laboratory Testing – Oil/Gas/Water,
CDR Plants Etc.
Material Testing – Metallurgical
Material Testing – Painting/Coating
Soil Testing
Water and Soil Quality Monitoring
Geotechnical Studies, Testing and Soil
Investigation Consultancy
Material Testing, Analysis and
Inspection
Laboratory Testing Services
Soil & Concrete Testing
Page 14 of 27

SECTION 5 - ACES FACILITIES
5.1 MAIN DRILLING, SAMPLING AND TESTING FACILITIES
5.1.1 DRILLING RIGS
ACES has more than 125 drilling rigs distributed between the sister companies. The
rigs can be mobilized from one sister company to another according to the volume of work.
Drilling Rigs permanently located in Abu Dhabi:
1. ACKER AD (II) Rotary Drill Rig, mounted on trailer, capacity 150m.
2. PILCON TRAVELLER 30 (II) Rotary Drill Rig, mounted on trailer, capacity 80m.
3. PILCON TRAVELLER 30 (III) Rotary Drill Rig, mounted on trailer, capacity 80m.
4. HYDREQ TRITON Rotary Drill Rig, mounted Trailer, capacity 120m.
5. ARDCO (I) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 100m
6. ARDCO (II) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 100m
7. ARDCO (III) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 100m
8. ARDCO (IV) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 100m
9. ARDCO (V) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 100m
10. ARDCO (VIII) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 100m
11. ARDCO (IX) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 100m
12. ARDCO (X) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 200m
13. ARDCO (XI) Rotary Drill Rig, mounted on Bedford truck, capacity 100m
14. ARDCO (XII) Rotary Drill Rig, mounted on TATA truck, capacity 100m
15. ARDCO (XIII) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 200m
16. ARDCO (XV) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 200m
17. CH-MECH Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 120m
18. DANDO WATER-TECH 10 Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 200m.
19. AGBO G 200 (I) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 400m
20. AGBO G 200 (II) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 400m
21. AGBO G 200 (III) Rotary Drill Rig, mounted on trailor, capacity 30m
22. ALM-I, Rotary Drill Rig, mounted on trailer, 20m
23. ALM-II, Rotary Drill Rig, mounted on trailer, 25m
24. Cheek Rotary Drill Rig, mounted on trailer, capacity 25m
25. SOILMECH Rotary Drill Rig, mounted on 6WD IVECO truck, capacity 500m
26. BEDFORD Rotary Drill Rig, mounted on 4WD, capacity 100m
27. Hands England (I) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 300m
28. Hands England (II) Rotary Drill Rig, mounted on 4WD Nissan truck, capacity 300m
5.1.2 OFFSHORE INVESTIGATION
1. JACK UP PONTOON MARINE I –Hydraulic Jacking System, with a deck of 12m x 9m,
capable to operate in 5-20m of water.
2. JACK UP PONTOON MARINE II –Hydraulic Jacking System, with a deck of 8m x 6m,
capable to operate in 5-10m of water.
3. JACK UP PONTOON MARINE III –Block Chains Jacking System, with a deck of 8m x
4m, capable to operate in 1-7 m of water.
4. JACK UP PONTOON MARINE IV –Block Chains Jacking System, with a deck of 8m x
4m, capable to operate in 1-7 m of water.
5. SPEED BOAT (1 No.) – Double Engine, 28ft long.
6. SPEED BOAT (2 Nos.) – Double Engine, 30ft long.
7. SPEED BOAT (1 No.) – Double Engine, 32ft long.
8. Land Craft (1 No.) – Double Engine, Deck of 45 x 11 ft.
Page 15 of 27

5.1.3 SOIL INVESTIGATION FIELD TESTING EQUIPMENT & TOOLS
1. PAGANI Static Cone Penetrometers TG 73-200 Self Anchoring & Self Propelled Type,
Capacity 200KN (with mechanical and piezocones).
2. PAGANI Static Cone Penetrometers TG 73-200, Truck Mounted, Capacity 200KN (with
mechanical and piezocones).
3. MENARD PRESSUREMETER SET (NFP 94-10) conforming to ASTM D4719.
4. HIGH PRESSURE DILATOMETER, ELASTMETER 2, OYO CORP., Japan
5. EXPLOFOR SET (Computerized Data Logging System for Drilling Parameters).
6. Field Vane Shear Test Apparatus - various dimensions.
7. Pneumatic Borehole Packer for Permeability (Luegon)Testing in Boreholes
8. Electrical Earth Resistivity Meters.
9. Soil Thermal Resistivity Meters, Laboratory & In-situ.
10. Radio Detection Pipes & Cables Location
11. Groundwater Monitoring Probes (Various Lengths).
12. Plate Bearing Testing Apparatus
13. Field CBR Testing Apparatus
14. Double Tube Core Barrels for Hard Soil and Rock Coring (Different sizes: HWF, T6-
101,T6-86, T2-76, NX).
15. Wireline Core Barrels (HQ & NQ Double Tube Core Barrels).
16. Pneumatic down the Hole Hammers with various diameters.
17. Split Barrel Tubes with Cone accessory for Standard Penetration Test (SPT) Open &
Solid Cones.
18. Thin Wall Tubes for Soil Sampling (shelby tubes) 3 inch diameter.
19. U 100 Sampling System with Heavy Duty Sliding Hammer for obtaining 4 inch soil
samples.
20. Piston samplers 3 inch diameter.
21. Drilling Rods with various diameters and lengths.
22. Auger Rods with various diameters and lengths.
23. Hollow Stem-Augers, different sizes (OD 7 & 9 inches) with pilot pits and possibility of
coring from inside.
24. Hand Augers
25. Casing with various outside diameters and lengths.
26. Water and Mud Pumps with various capacities.
27. Air Compressors with various capacities.
28. Ground water purging pumps.
29. Submersible pumps.
5.1.4 GEOPHYSICAL TESTING FACILITIES
Complete set of instruments for:
1. Electrical Resistivity Tomography (2D&3D-ERT)
2. Vertical Electrical Sounding
3. Induced Polarization (IP)
4. Spectral Analysis of Surface Waves (SASW)
5. Multi-Channel Analysis of Surface Waves (MASW)
6. Seismic Refraction Tomography
7. Vibration Monitoring
8. Ground Penetration Radar (GPR)
9. Micro-Gravity (MG)
10. Electromagnetic Methods
11. Standard Cross Hole Seismic
12. Down Hole Seismic Test
13. P-S Suspension Logging
Page 16 of 27

14. Full Wave Form Sonic Logging
15. Seismic Dilatometer Testing (SDMT)
16. Seismic Cone Penetration Testing (SCPT)
17. Cross-hole Seismic Tomography
18. Single-hole Seismic Tomography
19. Parallel Seismic Test (P.S.T)
20. Logging of Fluid Temperature
21. Logging of Fluid Resistivity/Conductivity
22. Logging of Three Arm Caliper
23. Logging of Impeller flow meter
24. Logging of Gamma-Gamma
25. Logging of Natural Gamma
26. Logging of Electrical Resistivity
27. Logging of Deviation (Verticality)
28. Acoustic Televiewer Logging
29. Video Logging
30. Marine Electrical Resistivity Tomography (Marine ERT)
31. Sub-bottom Profiler Survey (Seismic Reflection)
32. Marine Magnetic Survey
33. Side Scan Sonar Survey
5.1.5 IN-SITU FOUNDATIONS MONITORING AND TESTING
1. Low Strain Integrity Testing of Piles Devices, PDI, USA
2. High Strain Dynamic Testing of Piles Devices, PDI, USA
3. CAPWAP and PITWAP Analysis
4. Pile Instrumentation by using Vibrating Wire Strain Gauges
5. Pile Instrumentation by using Extensometers
6. Cross Hole Sonic Loggers, PDI, USA
7. Supervision of Static Load Test, complete set-up
8. Complete set of thermocouples & data loggers for Temperature Monitoring of Concrete.
5.1.6 LAND AND MARINE SURVEYING INSTRUMENTS
1. GPS LEICA VIVA GS14 Complete System with CS15 Field Controller (2 Set, 4 Units)
2. GPS LEICA SR 1230 (Dual Frequency) (6 Sets, 12 Units)
3. LEICA Total Station TC 1102
4. LEICA Total Station TC 1202
5. LEICA Total Station 1205
6. LEICA Total Station TC 405
7. LEICA Total Station TS 06 (2 Units)
8. LEICA DNA 3 (Digital) (2 Nos.)
9. Ground Penetrating Radar(GPR) RD1000
10. MALA Geoexplorer
11. Underground utilities locator, RD8000 (6 Nos.)
12. Ecosounder-Hydrotrac
13. Tide Gauge (Valport 740) Self recording
14. TSS DMS-500H Heave Sensor
15. KVH AC1000 Fluxgate Compass
Page 17 of 27

5.1.7 EVALUATION OF EXISTING STRUCTURES & PAVEMENTS
1. Electromagnetic covermeters
2. Half Cell Potential Devices
3. Ultrasonic Pulse Velocity Instruments for non-destructive testing of concrete
4. Pull-off / Pull Out testers/ Capo Test.
5. Rebound Hammers
6. Coating Thickness Gauges
7. Coating Holidays Detectors, Low Voltage/High Voltage (Spark Tester)
8. Concrete Moisture Encounter for in-situ concrete moisture
9. Crack Detection Microscope
10. Biaxial Inclinometer System for Measurement of Lateral Displacement.
11. Strain Gauge Sensors & Data Loggers.
12. Nuclear Density Meters.
5.1.8 ENVIRONMENTAL SAMPLING & MONITORING
1. Ambient Air Quality Monitoring Station
2. Indoor Air Quality Monitoring Instruments
3. Dust Sampling & Monitoring Device
4. Portable Flue Gas Analyser
5. Gas Monitoring Equipment (Multi-Gas Detectors)
6. Photo Ionization Detectors
7. Portable Multimeters (pH, EC, DO, ORP)
8. Digital Sound Level Meters, Class 1
9. Piezometers of various diameters and depth
10. Disposable Bailers and various sampling equipment
11. Water level meters and loggers.
12. LNAPL Interface meters
13. Ground water purging pumps.
Page 18 of 27

5.2 MAJOR LABORATORY TESTING FACILITIES
5.2.1 SOIL, ROCK AND AGGREGATE
Complete range of equipment for testing of:
Soils:
Rocks:
1. Classification Tests – Grain Size Distribution, Plasticity Characteristics,
Particle Density & Specific Gravity
2. Compaction Related Tests – Proctor, CBR, Maximum & Minimum Dry
Density
3. Shear Strength – Direct Shear Test, Triaxial Test, Unconfined Compression
Tests
4. Permeability – Falling and Constant Head Permeability Tests
5. Compressibility – One Dimensional Consolidation Test
6. Chemical Tests – Sulphate, Chloride, Carbonate Content, Organic Matter
Content.
1. Unconfined Compression Test
2. Modulus Elasticity & Poisson’s Ratio
3. Point Load Test
4. Slake Durability Index.
5. Cherchar Abrasion.
Aggregates & Stone:
1. Physical Properties – Grain Size Distribution, Density, Specific Gravity &
Water Absorption
2. Shape – Flakiness and Elongation Tests, Partially Crushed Faces
3. Sand Equivalent Value
4. Mechanical Properties – Aggregate Impact Value, Aggregate Crushing
Value, Ten Percent Fines Value, Los Angles Abrasion Value
5. Chemical Tests – Sulphate, Chloride, Organic Impurities, Potential Silica
Alkali Reactivity
5.2.2 CONCRETE TESTING
1. Concrete Compression Testing Machines
2. Compression frames for manholes cover, pipes and flexural testing
3. Water Permeability testing apparatus, according to DIN 1048.
4. Fully computerized complete set-up for electrical measurement of concrete ability to
resist Chloride Ion Penetration, AASHTO T-277/ ASTM C 1202.
5. Various testing equipment, mixers, moulds and tools for sampling and testing of
concrete.
6. Electromagnetic Covermeters
7. Half Cell Potential Devices
8. Ultrasonic Instrument for non-destructive testing of concrete.
9. A unique patented field system for measuring the rate of corrosion of steel
reinforcement in concrete and measuring of concrete resistivity ambient temperature
and relative humidity.
Page 19 of 27

10. Pull-off & Pull Out Testers, CAPO TEST.
11. Rebound Hammers.
12. Coating Thickness Gauges.
13. Coating Holidays Detectors, Low Voltage.
14. Coating Holidays Detectors, High Voltage (Spark Tester).
15. Concrete Moisture Encounter to measure insitu concrete moisture .
16. Initial Surface Absorption of Concrete According BS 1881 : Part 208.
17. Crack Detection Microscope.
18. Strain Gauge Sensors & Data Logger for Monitoring Strain in Rock.
5.2.3 METALLURGICAL TESTING
1. Universal Testing Machines with different capacity 1000kN, 600kN, 150kN & 15kN.
2. Bend-Rebend Test Equipment and Accessories.
3. Transverse and Shear Test Accessories.
4. Strands Testing Accessories.
5. Various Grips and attachments for mechanical testing of different samples shapes and
diameters.
6. Coating Thickness Gauges.
7. Coating Holidays Detectors, Low Voltage.
8. Coating Holidays Detectors, High Voltage (Spark Tester).
9. Optical Emission Apparatus, BELEC Germany.
10. Eectromagnetic Yoke for MPI, Magnaflux Y6.
11. Dye Penetrants for Dye Penetration Test.
12. Brinell Hardness Test Equipment.
13. Rockwell Hardness Tester.
5.2.4 CEMENT TESTING
1. Complete set of instruments to test the compressive, flexural & tensile strength of
cement.
2. Heat of Hydration Apparatus
3. Blain Air Permeability Apparatus
4. Vicat Apparatus
5. Le Chatelier Apparatus
6. Atomic Absorption Apparatus, Shimadzu, Japan
7. UV-VIS Spectror Photometer, JASCO, Japan
8. Autoclave Soundness Equipment
5.2.5 ASPHALT TESTING
1. Extraction Apparatus
2. Marshall Stability Apparatus
3. Flash & Fire Point Apparatus
4. Ductility Apparatus
5. Penetration Apparatus
6. Softening Point Apparatus
7. Indentation of Asphalt Waterproofing Membrane Apparatus
8. Asphalt cores sampling apparatus.
Page 20 of 27

5.2.6 GEOTEXTILE, MEMBRANE, GRP & PLASTIC TESTING
1. Universal Testing Machine for Tensile Strength, Tear Strength, Puncture Strength &
Resistance to Static Load.
2. Burst Strength Machine for Geotextile
3. Water Permeability Apparatus for Geotextile.
5.2.7 CHEMICAL ANALYSIS
1. GC MS Shimadzu QP 2010 PLUS with Liquid & Headspace Injection, SPME and
Tekmar Purge & Trap Sytem
2. ICP-OES-Thermo, Model ICAP6300
3. Atomic Absorption Apparatus, Shimadzu, Japan
4. Hydride Vapor Generator, Shimadzu, Japan
5. Mercury Vaporizer Unit, Shimadzu, Japan
6. Graphite Furnace, Shimadzu, Japan
7. TOC-TN Analyser (Total Organic Carbon – Total Nitrogen Analyser) Shimadzu, Japan
8. UV-VIS Spectro Photometer, JASCO, Japan
9. Ion Meters and Ion Selective Electrodes, Jenway, UK
10. PH Meters, Jenway, UK
11. ORP Portable Meter, EXTECH
12. Portable PH, Conductivity and Dissolved Oxygen Meter, 760DX, BK Precision
13. Orbital Shaker, Stuart SSL1
14. Kjeldahl Apparatus
5.2.8 MICROBIOLOGICAL ANALYSIS
1. Autoclaves
2. Incubators
3. Incubator water baths
4. Membrane Filtration Units
5. IDEXX, USA -Complete set-up for testing of:
Fecal coliforms
E coli
Total Coliforms
Heterotropic Plate Count
6. Laminar Flow Cabinets
7. Dark Field Colony Counters
8. Sterio Microscope
9. pH Meter
10.Vortex mixer
11. Hotplate with Magnetic Stirrer
5.3 OTHER TESTING FACILITIES
Fully equipped laboratories for physical, mechanical, chemical, electrical &
thermal testing of soils, concrete, aggregate, bitumen, cement, water, steel, etc…
All available equipment comply with the requirements of the British Standards
(BS), American Standards (ASTM) and/or the German Standards (DIN).
Page 21 of 27

SECTION 6 - ACES- ABU DHABI PERMANENT MANPOWER
PERSONNEL
The staff of ARAB CENTER FOR ENGINEERING STUDIES consists of highly qualified and
experienced geotechnical, geological, chemical, materials and foundation engineers, in addition to the
highly experienced and trained drillers and laboratory technicians. A summary of the names, degrees and
years of experience of the key staff of ACES Abu Dhabi are as follows:
6.1 PARTNERS AND DIRECTORS
Name Degree Fields of Experience Years of Experience
- Dr. I.E.D. Katkhuda Ph.D.
Civil
- Dr. Omar Abdulhadi Ph.D.
Civil
6.2 ACES ABU DHABI KEY STAFF
Materials and Geotechnical
Engineer
Geotechnical and Materials
Engineer
48 years
44 years
Serial
No.
Management:
Name of
Employees
1. Eng. Yousef Marei
2. Eng. Nadia Halawi
Job
Regional Gen. Manager /
Branch Manager
Asst. Br. Manager /Quality
Manager
3. Eng. Mohammad Shatnawi Manager, Geotechnical Dept.
4. Ashraf Salameh
5. Mohammad Almadani
6.
Mahmoud Kamal Abbas
Harb
Manager, Central Laboratory
Section
Manager, Site Laboratories
Section
Geophysical Dep. Manager
7. Nael Abu Al Rub Manager, Financial Dept.
Geotechnical Department:
8. Philip Abdel Messih Geotechnical Engineer
9. Rainer Basa Geotechnical Engineer
10.
Annamma Benny
Mangattuseril
11. Sufian Al Tamimi
12. Manjari Madakkara Geologist
Geotechnical Engineer
Head of Planning &
Operations
Page 22 of 27
Educational
Qualifications
M.Sc. (Civil
Engineering)
M.Sc. (Chemical
Engineering)
M.Sc. (Civil
Engineering)
B.Sc. (Civil
Engineering)
B.Sc. (Civil
Engineering)
M.Sc. (Field
Geophysics)
B.Sc.
(Commerce)
B.Sc (Civil Engg)
& M.Sc (Geology)
B.Sc. (Civil
Engineering)
M. Tech
(Geotechnical
Engineering & B.
Tech (Civil
Engineering)
B.Sc. (Geology)
M.Sc. (Marine
Geology)
31 years
28 years
15 years
16 years
17 years
11 Years
19 years
13 years
12 Years
3 Years
20 years
5 years
13. Mohammed Naseer Geologist B.Sc (Geology) 9 years
14. Moazzam Rafique Geologist
M.Sc (Geology),
MBA
3 years
15. Shahid Sarfraz Permit & NOC Engineer M.Sc (Geophysics) 7 years
Experience

Serial
No.
Name of
Employees
16. Muhammad Aitzaz Geologist
Job
17. Kashif Nadeem Engineering Geologist
18. Malik Ahmad Al-Moqasqas Site Supervisor
19. Haytham A. Yousif Site Supervisor
20. Bahaa’ Eideen Site Supervisor
21. Aftab Gul Site Supervisor
Educational
Qualifications
M.Sc
(Geology)
B.Sc
(Engg. Geology)
B.Sc (Water & Envt.
Mgmt.)
B.Sc.
(Geology)
B.Sc.
(Geology)
M.Sc
(Geology)
Experience
4 years
2 years
11 years
11 years
11 years
22 years
22. Bakht Akbar Site Supervisor High School 21 years
23. Awad Khafeef Site Supervisor High School 22 years
24. Marwan Ashmawi
Maintenance & Store
Supervisor
High School
23 years
25. Bilal Noufal Site Supervisor High School 12 years
Materials Department
26. Darwin Uy Material Engineer
27. Gengie Battad Material Engineer
28. Jojo Y. Guiquing Material Engineer
29.
Mohammed Mostafizur
Rahman
Material Engineer
B.Sc. (Civil
Engineering)
B.Sc. (Civil
Engineering)
B.Sc. (Civil
Engineering)
Diploma in Civil
Engineering
10 years
14 years
6 years
15 years
30. Faisal Tharammal Material Engineer B.Sc (Geology) 8 years
31. Jimmy E. Landagan Material Engineer
32.
Amro Abdullah Amer Al
Barakat
Material Engineer
B.Sc. (Civil
Engineering)
B.Sc. (Civil
Engineering)
7 years
6 years
33. Abid Mahmoud Chemical Engineer B.Sc. (Chemical Eng.) 18 years
34. Muraleedharan Cherukat Senior Chemist B.Sc (Chemistry) 33 years
35. Samir Ahmad Al Rifai Senior Chemist B.Sc (Chemistry) 13 years
36. Kasem Salama Chemist B.Sc (Chemistry) 9 years
37. Hans Emerson Pajarillo Chemist B.Sc (Chemistry) 4 years
38. Gishy Samuel Chemist M.Sc (Chemistry) 7 years
39. Winelen Madridano Chemist B.Sc (Chemistry) 5 years
40. Cijo M Xavier Chemist B.Sc (Chemistry) 10 years
41. Olatunde Qudus Olawale Chemist
B.Sc (Petrochemical
Science)
4 years
42. Niña Rose Regidor Chemist B.Sc (Chemistry) 6 years
Page 23 of 27

Serial
No.
Name of
Employees
Job
Educational
Qualifications
43. Princess Joy Del Rosario Chemist B.Sc (Chemistry) 5 years
44. Fape Isaac Oluwaseun Chemist
B.Sc (Environmental
Management)
Experience
5 years
45. Roopika Sanoj Sr. Microbiologist M.Sc (Biochemistry) 5 years
46. Mohamed Usman Ali Instrumentation Supervisor B.Sc (Chemistry) 12 years
47. Glen Moyano Instrumentation Engineer
48. Ben Aburaouf Akil Instrumentation Engineer
49. Kristoffer Owen Aquino Instrumentation Technician
B.Sc. (Electronics and
Comm. Engg)
B.Sc. (Electrical
Engineering)
B.Sc. (Electrical
Engineering)
13 years
4 years
7 years
50. Shajin Puthiyadath Instrumentation Technician B.Sc. Geology 8 years
51. Ian Allen D. Cunanan Instrumentation Technician B.Sc. (Computer Eng’g.) 5 years
52. Sami Abdo Civil Laboratory Supervisor Diploma (Civil Eng’g.) 36 years
53. Arshad Siddiqi Senior Technician Diploma (Civil Eng’g.) 33 years
54. Suseelan Dharmarajan Senior Technician Diploma (Civil Eng’g.) 34 years
55. Akbar P. S. Senior Technician Diploma (Civil Eng’g.) 18 years
56. Jamsheer Karuvattil Senior Technician B.Sc (Math) 8 years
57. Sreejith Anamdan Kattil Senior Technician B.Sc (Botany) 7 years
58. Harikrishnan Nanappan Senior Technician B.Sc (Physics) 7 years
59.
Sayed Tabasum Ahmed
Sayed
Senior Technician B. Sc (Science) 9 years
60. Kalugala Sisira De Silva Senior Technician B. Sc (Science) 25 years
Survey Department :
61. Eng. Ali Ismail Radwan Senior Survey Engineer B.Sc. (Civil Engineering) 15 Years
62. Eng. William Riad Survey Engineer
B.Sc. (Geodetic
Engineering)
7 Years
63. Mohanad Younes CAD Chief B.Sc. (Civil Engineering) 21 years
64. Zaid Al Muqasqas
Chief Surveyor
Site Coordinator
65. Melvin Laviña Survey Engineer
66. Vicente Abarca Survey Engineer
67. Osita Obianwu Survey Engineer
Diploma (Surveying)
B.Sc. (Geodetic
Engineering)
B.Sc. (Civil Engineering)
B.Sc. (Geoinformation &
Geodetic Engineering)
B.Sc. Surveying &
Geoinformatics
8 Years
15 Years
11 Years
8 Years
68. Akbar Hydar Senior Surveyor Diploma in Surveying 11 Years
69. Irfan Saeed Senior Surveyor Certificate in Surveying 12 Years
Page 24 of 27

Serial
No.
Name of
Employees
70. Dominic Ndeh
Job
Geophysicist
Survey Engineer
71. Muhammad Javed Senior Surveyor
Educational
Qualifications
Masters in Petroleum
Geophysics
Diploma in Civil
Engineering
Experience
8 Years
19 Years
72. Mostafa Ibrahim Surveyor Bachelor of Arts 9 Years
73. Musawar Ali Surveyor
74. Shane Gregory CAD Operator
75. Nishak Kadavil CAD Operator
76. Saran Surendran CAD Operator
77. Mohamed Muzammil CAD Operator
Geophysical Department :
Diploma (Associate
Engineering Civil)
Diploma in Civil
Engineering
Diploma in Civil
Engineering
Diploma in Civil
Engineering
Diploma in Civil
Engineering
10 Years
17 Years
8 Years
3 Years
2 Years
78. Hamdan Ali M Hamdan Head of Technical Section Ph. D (Geophysics) 12 Years
79. Dominic Ndeh Munang
80. Muhammad Imran Khan
81.
82.
83.
84.
85.
86.
Nadeem Iqbal Muhammad
Amin
Mohammed Alfatih Ahmed
Abu Baker
Monim Usmani Abdul
Hameed Usmani
Mohsin Ali Shuja Ali Anwar
Satti
Muhammad Haroon Afzal
Muhammad
Mohamed Yossri
Abdelkader
Senior Marine Geophysical
Engineer
Senior Geophysical
Engineer
M.Sc. (Petroleum
Geophysics)
M.Sc. (Geophysics)
8 Years
9 Years
Geophysicist B.Sc. (Geophysics) 3 Years
Geophysicist B.Sc. (Geophysics) 4 Years
Geophysicist B.Sc. (Geophysics) 6 Years
Geophysicist B.Sc. (Geophysics) 6 Years
Geophysicist M.Sc. (Geophysics) 4 Years
Geophysicist B.Sc. (Geophysics) 4 Years
87. Karim Ali Mahfooz Geophysicist B.Sc. (Geophysics) 4 Years
88.
Hazem Mohamed
Abdelmoneim
Sr. Geophysical Technician Diploma Electric 10 Years
89. Moshood Enitan Borokinni Sr. Geophysical Technician M. Sc. (Geophysics) 3 Years
90.
Ahmed Zaky Damarany
Ahmed
Quality, HSE, IT:
91. Florindo Sampang Quality Control Officer
92. Sajith V.S. Quality Control Officer
93. Onaolapo Francis Olawale Quality Control Officer
94. Quince Banez IT Officer
Geophysical Technician Diploma Electric 3years
B.Sc (Civil
Engineering)
M.Sc
(Mathematics)
B.Sc. (Applied
Geophysics)
BS (Computer
Engineering)
14 years
5 years
8 Years
7 years
Page 25 of 27

Serial
No.
Name of
Employees
Job
Educational
Qualifications
95. Zafar Ullah Khan Senior HSE Officer M.Sc (Computer Science) 9 years
96. Khalid N. Abu Rumailah HSE Officer Diploma 15 years
97. Amsar Sappal Amud HSE Officer
Associate in Computer
Technology
Experience
8 years
98. Justin Jose HSE Officer B.Sc (Nursing) 5 years
Finance and Administration:
99. Husam Moh’d. Hussain H.R. Officer Diploma (Computer) 16 years
100. Feras Al Marei Accountant
B.Sc. Commerce
(Accountant)
101. Ahmad Kamal Accountant
B.Sc. (Management
Business Administration)
102. Lyra Ann Egot Accountant
B.Sc. Commerce
(Accountant)
103. Joan Louis T. Ilagan Accountant B. Sc. Financial
Management
104. Hazel Ann Gallinera Contracts Officer
BsBA (Financial
Management)
105. Mark Gregor E. Tible Department Account
B.Sc. (Computer
Engineering)
106. Jaweed Abdul Qader Asad Collection Supervisor
Diploma (Business Adm.,
Finance and Banking)
6 years
7 years
8 years
6 years
4 years
9 years
25 years
107. Bilal Al Khatib Collector B.Sc. Commerce 11 years
Page 26 of 27

SECTION 7 - MAJOR CLIENTS
ACES ABU-DHABI MAJOR CLIENTS
Abu Dhabi National Oil Company (ADNOC)
¨
¨
¨
¨
¨
¨
¨
¨
Abu Dhabi Nat'l Oil Co. (ADNOC-Distribution)
Abu Dhabi Co. For Onshore Oil Operation (ADCO)
Abu Dhabi Marine Operating Co. (ADMA-OPCO)
Abu Dhabi Gas Liquefaction & Co. Ltd. (ADGAS)
Abu Dhabi Gas Industries Ltd. (GASCO)
Abu Dhabi Oil Refining Co. (TAKREER)
Abu Dhabi Polymers co. Ltd. (BOUROUGE)
Ruwais Fertilizer Industries (FERTIL)
Abu Dhabi Municipality
¨ Engineering Section
¨ Road Section
¨ Town Planning Dept.
¨ Public Gardens Directorate
Abu Dhabi Water and Electricity Authority (ADWEA)
¨ Abu Dhabi Sewerage Services Co. (ADSSC)
¨ Abu Dhabi Distribution Company (ADDC)
¨ Abu Dhabi Transmission & Dispatch Company (TRANSCO)
¨ Abu Dhabi National Energy Company (TAQA)
Emirates Nuclear Energy Corp (ENEC)
Directorate of Military Works
Emirates Telecommunication Corporation (ETISALAT)
Supervision Committee for the Expansion of the Abu Dhabi International
Airport ( SCADIA)
Abu Dhabi Airport Company (ADAC)
Ministry of Interior / Eng’g. Dept.
Ministry of Public Works & Housing
Abu Dhabi Police Directorate
Abu Dhabi Investment Authority (ADIA)
Abu Dhabi National industrial Projects Co. (ADNIP)
National Marine Dredging Company (NMDC)
Dolphin Energy Ltd.
Higher Corporation for Specialized Economic Zones (HCSEZ)
National Investment Corp. (NIC)
National Petroleum Const. Co. (NPCC)
Private Department of H.H. The President
Abu Dhabi’s Tourism Development & Investment Company (TDIC)
ALDAR Properties PJSC
Sorouh Real Estate PJSC
Tameer Holding Investments
Mubadala Development Company
Abu Dhabi General Services (MUSANADA)
Tamouh Investments
Al Qudra Holding
International Capital Trading (ICT)
Major national & international Developers, Consultants & Contractors operating in UAE.
Page 27 of 27

APPENDIX A
ORGANIZATION CHART

ARAB CENTER FOR ENGINEERING STUDIES
GROUP ORGANIZATION CHART
CORPORATE
HEADQUARTERS
AMMAN, JORDAN
JORDAN
UAE
QATAR
OMAN
SAUDI
ARABIA
ACES
Aqaba
ACES
Abu Dhabi
ACES
Doha
ACES
Muscat
ACES
Riyadh
ACES
Amman
ACES
Al Ain
ACES
Jeddah
ACES
Dubai
ACES
Khobar
ACES
Buraidah

ACES ABU DHABI
Organization Chart
Board of Directors
Regional General
Manager
Yousef Al Marei
Branch Manager
Yousef Al Marei
Assistant Branch
Manager
Nadia Halawi
Materials
Department Manager
Ashraf Salameh
Geophysics Dept.
Manager
Mahmoud Harb
Quality Control of
Projects Manager
Mah'd Al Madani
Manager of Geotechnical
Department
Mohammad Al Shatnawi
Manager of
Surveying
Department
Financial
Manager
Nael Abu Al Rub
Administration
& HR
Quality, Safety, IT
Manager
Nadia Halawi
Material/ Chemical
Engineers
Jojo Quiquing
Jimmy Landagan
Abed Mahmoud
Shoaib Ahmad
Mohd. Mostafizur
Computer
Operators
Laboratory
Engineer
Darwin Uy
Instrumentation
Engineers
Mohd Usman Ali
Glen Moyano
Ben Abdo Raouf
Office Geophysicist
Computer Operator
Head of Technical
Section
Hamdan Ali Hamdan
On-Shore Site
Supervisor
Muhammad Imran
Off-Shore Site
Supervisor
Dominic Ndeh
Material
Engineers
Gengie Battad
Faisal Tharammal
Amr Al Barakat
Sites Coordination &
Planning Geologist
Sufian Tamimi
Assistant
Shahid Sarfaz
Geotechnical Engineers/
Engineering Geologists
Philip Fakhry
Rainer Basa
Manjari Shajin
Muhammed Naseer
Moazzam Rafique
Muhammad Aitzaz
Kashif Nadeem
Annamma Benny
Sr. Surveying
Engineer
Ali Ismail Radwan
William Riad
Accountants
Feras Al Marei
Ahmad Kamal
Lyra Ann Egot
Joan Louis Ilagan
Contracts
Officer
Hazel Ann
Gallinera
Collectors
HR Supervisor
Hussam Attal
HR Assistants
Services
Supervisor
Naeem Al Terawi
Transportation
Supervisor
Customer
Service
Quality Control
Officers
Florindo Sampang
Sajith V.S
Onaolapo Francis
IT Officer
Quince Banez
Safety Officers
Zafar Ullah Khan
Amsar Amud
Khaled Abu Rumeilah
Justin Jose
Civil Laboratory
Supervisor
Chemical Lab.
Supervisor
Computer
Operators
Computer
Operators
Premises
Supervisors
Senior Technicians
Technicians
Assistants
Senior Chemists
Chemists
Instrumentation
Technicians
Field Geophysicists
Technicians
Labors & Drivers
Maintenance &
Storekeeper
Site Geologist /
Site Supervisors
CAD Chief
Mohanad Younes
CAD Operators
Survey Chief
Zaid Al Muqasqas
Surveyors
Archive
Keeper
Senior Technicians
Technicians
Assistants
Drilling Supervisors,
Drillers,
Assistants
Senior Technicians,
Technicians,
Assistants
Chainmen,
Assistants

APPENDIX B
LICENSES AND CERTIFICATES

Commercial License
رخصة تجارية
License No : CN-1001759
:
رقم الرخصة
Unified ID for ADCCI
:
8091
الرقم الموحد لعضوية الغرفة :
الشكل القانوني :
فرع أجنبية - الأردن
Legal Form : Foreign Branch - Jordan
:
الإسم التجاري
المركز العربي للدراسات الهندسية ابوظبي
Trade Name
Establishment Date
Issue Date
: Arab Center For Engineering Studies Abu Dhabi
: 10/10/1996
:
:
22/01/2017
:
تاريخ تأسيس المنشأة
تاريخ الإصدار
Expiry Date
:
21/01/2018
:
تاريخ الإنتهاء
نوع الشراكة
Partner
الجنسية
Nationality
الوصف
Description
الرمز
No.
المركز العربي للدراسات الهندسية
الأردن
مالك
30000171
Owner
Jordan
-
شركة علي واولاده - ذ م م
الإمارات العربية المتحدة
وكيل خدمات
41000349
Sponsor
United Arab Emirates
ALI & SONS COMPANY - L L C
Commercial Activities :
Onshore And Offshore Oil And Gas Fields And Facilities Services
Soil Testing Services
Chemical And Biological Analysis Lab
Mechanical And Physical Tests Lab
Industrial Installations Inspection Consultancies
Work Measurement And Space
Geological And Geophysical Consultancy And Studies And Researches
:
الأنشطة التجارية
خدمات حقول ومنشأت النفط والغاز البرية والبحرية
خدمات فحص التربة
مختبر تحاليل كيماوية وبيولوجية
مختبر الفحوص الميكانيكية والفيزيائية
استشارات الكشف على الانشاءات للأبنية والتجهيزات الصناعية
اعمال القياس والمساحة
الاستشارات والدراسات والبحوث الجيولوجية والجيوفيزيائية
العنوان
: المصفح الصناعية - إيكاد - 1 المالك - المؤسسة العليا للمناطق الاقتصادية المتخصصة,‏ : Address
تشهد غرفة أبوظبي بموجب القانون رقم 27 لعام 2005 بأن المنشأة المذكورة أعلاه قد سجلت لدينا
Abu Dhabi Chamber certifies that the above mentioned establishment has been registered in accordance with the law No.27 of 2005
وثيقة معتمدة وصادرة بدون توقيع أو ختم من دائرة التنمية الإقتصادية - أبوظبي.‏ للتحقق من صحة البيانات الواردة في الرخصة برجاء زيارة الموقع http://www.ded.abudhabi.ae
Approved document issued without signature or stamp by the Department of Economic Development - Abu Dhabi. To verify the
license kindly visit http://www.ded.abudhabi.ae
This Document is Considered As Commercial Register
تعتبر هذه الوثيقة بمثابة سجل تجاري
*CR-2264750*
http://ded.abudhabi.ae

UNITED ARAB EMIRATES
Ministry of Economy
Commercial Registration Dept.
الإمارات العربیة المتحدة
وزارة الاقتصاد
إدارة التسجیل التجاري
شھادة تجدید فرع منشأة أجنبیة
Registration Renewal Certificate of Branch of Foreign Facility
اسم المنشأة:‏
المركز العربي للدراسات الھندسیة
Facility Name:
ARAB CENTER FOR ENGINEERING
STUDIES
رقم القید:‏ No.: 79 Registration
تاریخ القید:‏ 05-08-1990 Registration: Date of
انتھاء القید:‏ 04-08-2018 Date: Expiry
Department of Economic
Development Lisence:
رقم القید لدى دائرة التنمیة cn-1001759
الإقتصادیة :
الجنسیة:‏ الاردن Nationality:
عنوان المركزالرئیسي:‏
الصویفیة - وادي السیر - عمان - المملكة الأردنیة Address: Head Office
الھاشمیة
الإمارة:‏ ابوظبي Emirate:
العنوان داخل الدولة:‏
ص.ب:‏ - 5012 مدینة أبو ظبي الصناعیة - ایكاد (UAE): 1 Address
- - - أبوظبي
اسم الوكیل:‏ شركة علي وأولاده ‏(ذ.م.م)‏ Name: Agent
مدیر المنشأة:‏ یوسف احمد محمد المرعي Manager: Branch
خدمات حقول ومنشآت النفط والغاز البریة والبحریة،‏ مختبر فحص التربة،‏ مختبر تحالیل كیماویة
وبیولوجیة،‏ مختبر للفحوص المیكانیكیة والفیزیائیة،‏ التقییم والتحلیل والكشف على الإنشاءات
والتجھیزات الصناعیة ، اعمال القیاس والمساحة . الاستشارات والدارسات والبحوث الجیولوجیة
والجیوفیزیائیة
النشاط:‏
Activity:
Remark:
ملاحظة:‏
تحریراً‏ في:‏ 30-08-2017 Date: Issue
المهندس / محمد احمد بن عبد العزيز الشحي
وكيل الوزارة للشؤون الاقتصادية

This is to attest that
ARAB CENTER FOR ENGINEERING STUDIES ABU DHABI
PO BOX 5012 ICAD-1
SECTOR M41 PLOT 166-C5
ABU DHABI
UNITED ARAB EMIRATE
Testing Laboratory TL-465
has met the requirements of the IAS Accreditation Criteria for Testing Laboratories (AC89), has demonstrated
compliance with ISO/IEC Standard 17025:2005, General requirements for the competence of testing and
calibration laboratories, and has been accredited, commencing June 22, 2016, for the test methods listed in the
approved scope of accreditation.
(See laboratory’s scope of accreditation for fields of testing and accredited test methods.)
This accreditation certificate supersedes any IAS
accreditation bearing an earlier effective date. The
certificate becomes invalid upon suspension,
cancellation or revocation of accreditation.
See http://iasonline.org/More/search.html for current
accreditation information, or contact IAS at 562-364-8201.
C.P. Ramani, P.E., C.B.O
President

IAS Accreditation Number
Accredited Entity
Address
TL-465
Arab Center for Engineering Studies Abu Dhabi
P.O. Box 5012 ICAD-1
Sector M41 Plot 166-C5
Abu Dhabi
United Arab Emirates
Yousef Al Marei, Manager
Contact Name
Telephone 971 2 5502774
Effective Date of Scope June 22, 2016
Accreditation Standard ISO/IEC Standard 17025:2005
FIELD OF TESTING TITLE TEST STANDARD/ METHOD
CONSTRUCTION MATERIAL TESTING
Sampling of Fresh Concrete BS EN 12350-1:2009
Making and Curing of Specimens for BS EN 12390-2:2009
Strength Tests
Compressive Strength of Cube
BS EN 12390-3:2009
Specimens
Density of Hardened Concrete BS EN 12390-7:2009
Concrete
Depth of Penetration of Water under BS EN 12390-8:2009
Pressure
Method for Determination of Water BS 1881:2011 Part 122
Absorption
Electrical Indication of Concrete’s Ability ASTM C1202: 2012
to Resist Chloride Ion Penetration
Water Permeability DIN 1048: 1991 Part 5
Determination of particle size
BS 812-103.1:1985
distribution
Flakiness index of coarse aggregate BS 812-105.1:1989
Aggregates
Elongation index of coarse aggregate BS 812-105.2:1990
Determination of moisture content BS 812-109:1990
Determination of particle densities and
water absorption
BS 812 Part 2:1995 (Amd. 1037-
99) CI.5.3; 5.4 and 5.5
Bend Test BS 4449: 1988 Annex C Cl. 1.6.1
Rebend Test (Grade 460)
BS 4449:1997 (Amd.12032-01)
Appendix E Clause E1.6
Rebend Test (Grade 500)
BS 4449:2005+A3:2016 Cl.7.2.5
Steel
Tensile Test(Grade 460)
BS 4449:1997 (Amd.12032-
2001) Appendix E Clause
E1.4&BS EN 10002:1990 Part 1
Tensile Test(Grade 500)
BS 4449:2005+A3:2016 Cl.
7.2.3, BS EN ISO 15630-
1:2002CL.5; BS EN ISO 6892-
1:2009
Page 2 of 4
TL-465, Arab Center for Engineering Studies Abu Dhabi

FIELD OF TESTING TITLE TEST STANDARD/METHOD
Determination of Particle Size Distribution BS 1377:1 990 Part 2 Amd. 9027-
96, Cl.9.2 and 9.3
Determination of Liquid Limit, Plastic Limit BS 1377:1990 Part 2 Amd. 9027-
and Plasticity Index of Soil
96 Cl 4.5, 5.3 and 5.4
Determination of Dry Density Moisture BS 1377:1990 Part 4 Amd.
Content Relationship using 4.5kg
13925-02, CI.3.5&3.6
Rammer
Determination of California Bearing Ratio BS 1377:1990 Part 4 Amd.
Soil for Civil Engineering
Purposes
Waters/Waste Waters
(CBR)
Determination of In-situ Density by Sand
Replacement Method (Large Pouring
Cylinder)
13925-02, Cl. 7.2. 3.2.
BS 1377:1990 Part 9 Amd. 8264-
95, Cl. 2.2
Standard Test Method for Particle - Size ASTM Standards D422-63(07) e2
Analysis of Soils
Standard Test Method for Liquid Limit, ASTM Standards D4318-10
Plastic Limit, and Plasticity Index of Soils
Standard Test Method for Density and ASTM Standards D1556/M1556-
Unit weight of Soil by Sand Cone Method 15
CHEMICAL AND ENVIRONMENTAL ANALYSIS
Determination of PH Value of soil BS 1377:1990 Part 3 Amd. 9028-
96 Cl.9
Determination to the sulphate content of BS 1377:1990 Part 3 Amd. 9028-
Soil
soil (water extract and acid extract ) 96 Cl 5.2 & 5.3
Determination of the chloride content of BS 1377:1990 Part 3 Amd. 9028-
soil(water extract and acid extract) 96 Cl 7.2 & 7.3
Determination of chloride content of BS 1881:2015 Part 124 Cl 12.1
hardened concrete
Concrete
Determination of sulphate content of BS 1881:2015 Part 124 Cl 12.2
hardened concrete
Determination of the sulphate content of BS 1377:1990 Part 3 Amd. 9028-
ground water
96 Cl 5.4
Determination of the chloride content of BS Standard 1377:1990 Part 3
Ground Water
ground water
Amd. 9028-96 CI 7.2
Determination of the pH value BS 1377:1990 Part 3 Amd. 9028-
96 Cl 9
Preliminary Treatment Of Samples APHA 3030 B&F
Inductively Coupled Plasma (ICP)
APHA3120(B)
Method: Ag, Al, As, Ba, Be, Ca, Cd, Co,
Cr, Cu,Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sb,
Se,Sn, V, Zn
Purge and Trap for Aqueous Samples
Volatile Organic Compounds by Gas
Chromatography / Mass Spectrometry
(GC MS)
Total Organic Carbon
USEPA 5030C
USEPA 8260C
APHA 5310B
Page 3 of 4
TL-465, Arab Center for Engineering Studies Abu Dhabi

FIELD OF TESTING TITLE TEST STANDARD/METHOD
CHEMICAL AND ENVIRONMENTAL ANALYSIS
Acid Digestion Of Sediments, Sludges, USEPA 3050B
And Soils
Inductively Coupled Plasma (ICP)
APHA3120(B)
Method: Ag, Al, As, Ba, Be, Ca, Cd, Co,
Cr, Cu,Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sb,
Soil and Sediments
Se,Sn, V, Zn
Closed-System Purge-And-Trap And USEPA 5035A
Extraction For Volatile Organics In Soil
And Waste Samples
Volatile Organic Compounds by Gas USEPA 8260C
Chromatography / Mass Spectrometry
(GC MS)
MICROBIOLOGICAL TESTING
Total Coliforms
APHA 9223B (IDEXX COLILERT &
COLILERT 18 )
Fecal Coliforms
SOP016 based on APHA 9223B
(IDEXX COLILERT 18)
E-coli
APHA 9223B (IDEXX COLILERT &
Water, Waste Water
COLILERT 18 )
Enterococci ASTM D6503-99 (2009)
Standard Total Coliform Membrane Filter APHA 9222B
Procedure
Fecal Coliform Membrane Filter Procedure APHA 9222D
Escherichia coli MF Partition Methods APHA 9222G
GEOTECHNICAL
Standard Test Method for Uncomfined
Compressive Strength of Intack Rock Core
ASTM Standards D7012-2014
Method C
Specimen
Rock
Standard Practices for Preparing Rock
Core as Cylindrical Test Specimens and
Verifying Conformance to Dimensional and
Shape Tolerances
ASTM Standards D4543-2008
Page 4 of 4
TL-465, Arab Center for Engineering Studies Abu Dhabi

Certificate of Accreditation
شھادة الإعتماد
Certificate Number
NAL 062
رقم الشھادة
تاریخ الإصدار 2013-11-27 Date of Issuance
صالح إلى 2020-01-24 Valid Until
Issued To
صادر إلى
رقم جھة تقییم المطابقة 16-00135-L CAB ID
اسم جھة تقییم المطابقة
CAB Name
Arab Center for Engineering
studies
نوع جھة تقییم المطابقة مختبرات فحص CAB Type Testing Laboratories
عنوان جھة تقییم المطابقة CAB Address Industrial City of Abu Dhabi ( ICAD-1) Sector M-41 , Plot 166C5
اعتُمدت وفقا ل Accredited according to ISO/IEC 17025:2005
معالي الدكتور راشد بن أحمد بن فھد
وزیر دولة
رئیس مجلس إدارة ھیئة الإمارات للمواصفات و المقاییس
This certificate is invalid without the attached scope of accreditation and shall
remain valid until the expiration date above, subject to continuing compliance
with the requirements of the accreditation system.
تعتبر ھذة الشھادة صالحة و قابلة للتحدیث و إعادة الإصدار حتى تاریخ الإنتھاء المدون أعلاه شریطة إستمرار الجھة
المذكورة أعلاه فى تطبیق المواصفات و الأدلة سالفة الذكر.‏ و تتحمل الجھة مسئولیة الشھادات الصادرة عنھا و تخضع
مجالات الإعتماد المذكورة فى وثیقة المجال المرفقة لعملیات متابعة لاحقة من قبل نظام الإعتماد الوطنى
This is an electronic certificate and does not require stamp and signature.
Visit ESMA website www.esma.gov.ae to verify this certification.
Any alternation or modification on this certificate will affect its validity.
ھذة الشھادة صدرت إلكترونیاً‏ ولا تحتاج إلى ختم وتوقیع.‏
للتأكد من صحة ھذة الشھادة یرجى زیارة موقعنا على الإنترنت و الدخول إلى خدمة الإستعلام عن المستندات الصادرة www.esma.gov.ae
أى كشط أو تغییر فى ھذه الشھادة یلغیھا.‏
ھاتف +971 4 2944434 Tel.:
فاكس +971 4 2944428 Fax:
ص.ب 48666 دبى ‏،الإمارات العربية المتحدة
P.O.BOX 48666, Dubaii - United Arab Emirates
ھاتف +971 2 4032700 Tel.:
فاكس +971 2 6715999 Fax:
ص.ب 2166 أبو ظبى الإمارات العربية المتحدة
P.O.BOX 2166, Abu Dhabi - United Arab Emirates
600-565554
esma.gov.ae

Scope Appendix
رقم الشھادة Certificate Number NAL 062
تاریخ الإصدار 2017-01-25 Date of Issuance
رقم الملحق 062-A-1 Appendix Number NAL
Subject
Issued To
CAB Name
CAB Type
Emirates National
Accreditation System
Accreditation Scope
Appendix
Arab Center for Engineering
studies
Testing and Calibration
Laboratories
العنوان
صادر إلى
اسم جھة تقییم المطابقة
نوع جھة تقییم المطابقة
نظام الإعتماد الوطنى الإماراتى
ملحق مجالات الإعتماد
مختبرات الفحص و المعایرة
فرع جھة تقییم المطابقة مختبرات فحص CAB Sub Type Testing Laboratories
# Test Material Matrix Types of Test / Properties
Measured
Tested Method / Standard
1 Concrete Compressive Strength of
Cubes including curing
BS EN 12390-3:2009; BS EN
12390-2:2009
2 Concrete Density of Hardened Concrete BS EN 12390-7: 2009
3 Concrete Water Absorption of Concrete BS1881 : 2011 Part 122
4 Concrete Electrical Indication of
Concrete’s Ability to Resist
Chloride Ion Penetration
ASTM C1202 : 2012
5 Concrete Water Permeability DIN 1048 : 1991 Part 5
6 Aggregates Determination of particle size
distribution
7 Aggregates Flakiness index of coarse
aggregate
8 Aggregates Elongation index of coarse
aggregate
9 Aggregates Determination of moisture
content
10 Aggregates Determination of particle
densities and water
absorption
BS 812-103.1:1985
BS 812-105.1:1989
BS 812-105.2:1990
BS 812-109:1990
BS 812 Part 2: 1995 (Amd.10379
-99) Cl.5.3; 5.4; 5.5
This scope of accreditation is invalid without certificate of accreditation
and cannot be used as a separate document.
مجال الإعتماد غیر صالح بدون شھادة الإعتماد
ولایمكن استخدامھ كوثیقة منفصلة
This is an electronic certificate and does not require stamp and signature.
Visit ESMA website www.esma.gov.ae to verify this certification.
Any alternation or modification on this certificate will affect its validity.
ھذة الشھادة صدرت إلكترونیاً‏ ولا تحتاج إلى ختم وتوقیع.‏
للتأكد من صحة ھذة الشھادة یرجى زیارة موقعنا على الإنترنت www.esma.gov.ae
و الدخول إلى خدمة الإستعلام عن المستندات الصادرة
أى كشط أو تغییر فى ھذه الشھادة یلغیھا.‏
ھاتف +971 4 2944434 Tel.:
فاكس +971 4 2944428 Fax:
ص.ب 48666 دبى ‏،الإمارات العربية المتحدة
P.O.BOX 48666, Dubaii - United Arab Emirates
ھاتف +971 2 4032700 Tel.:
فاكس +971 2 6715999 Fax:
ص.ب 2166 أبو ظبى الإمارات العربية المتحدة
P.O.BOX 2166, Abu Dhabi - United Arab Emirates
600-565554
esma.gov.ae

Scope Appendix
11 Soil for civil engineering purposes Determination of Particle Size
Distribution
12 Soil for civil engineering purposes Determination of Dry Density-
Moisture Content Relationship
using 4,5kg Rammer
13 Soil for civil engineering purposes Determination of California
Bearing Ratio (CBR)
14 Soil for civil engineering purposes Determination of In-situ
Density by Sand Replacement
Method (Large Pouring
Cylinder)
15 Concrete Determination of chloride
content of hardened concrete
16 Concrete Determination of sulphate
content of hardened concrete
17 Soil Determination of pH Value of
soil
18 Soil Determination ot the sulphate
content of soil (water extract
and acid extract )
19 Soil Determination of the chloride
content of soil(water extract
and acid extract)
20 Ground Water Determination of the sulphate
content of ground water
21 Ground Water Determination of the chloride
content of ground water
BS 1377:1990 Part 2 Amd. 9027-
96, Cl.9.2
BS 1377:1990 Part 4 Amd. 13925
-02, CI.3.5&3.6
BS 1377:1990 Part 4 Amd. 13925
-02, Cl. 7.2. 3.2.
BS 1377:1990 Part 9 Amd. 8264-
95, Cl. 2.2
BS 1881:2015 Part 124 Cl 12.1
BS 1881:2015 Part 124 Cl 12.2
BS 1377:1990 Part 3 Amd. 9028-
96 Cl.9
BS 1377:1990 Part 3 Amd. 9028-
96 Cl 5.2 & 5.3
BS 1377:1990 Part 3 Amd. 9028-
96 Cl 7.2 & 7.3
BS 1377:1990 Part 3 Amd. 9028-
96 Cl 5.4
BS 1377:1990 Part 3 Amd. 9028-
96 Cl 7.2
22 Ground Water Determination of the pH value BS 1377:1990 Part 3 Amd. 9028-
96 Cl 9
23 Soil and Sediments Determination of Metals by
ICP-OES: Ag, Al, As, Ba, Be,
Ca, Cd, Co, Cr, Cu,Fe, K, Mg,
Mn, Mo, Na, Ni, Pb, Sb,
Se,Sn, V, Zn
24 Soil and Sediments Volatile Organic Compounds
by Gas Chromatography /
Mass Spectrometry (GC MS)
25 Soil and Sediments Petroleum Hydrocarbons-
Diesel Range Petroleum
Hydrocarbons (DRO)
26 Soil and Sediments Petroleum Hydrocarbons-
Gasoline Range Petroleum
Hydrocarbons (GRO)
SOP005 and SOP004, based on
APHA3120(B) & USEPA 3050B
by ICP-OES
SOP013 & SOP015 based on
USEPA 8260C & USEPA 5035A
By Gas Chromatography / Mass
Spectrometry (GC MS)
USEPA 8015D and USEPA
3550C
USEPA 8015D and USEPA
5035A
This scope of accreditation is invalid without certificate of accreditation
and cannot be used as a separate document.
This is an electronic certificate and does not require stamp and signature.
Visit ESMA website www.esma.gov.ae to verify this certification.
Any alternation or modification on this certificate will affect its validity.
مجال الإعتماد غیر صالح بدون شھادة الإعتماد
ولایمكن استخدامھ كوثیقة منفصلة
ھذة الشھادة صدرت إلكترونیاً‏ ولا تحتاج إلى ختم وتوقیع.‏
للتأكد من صحة ھذة الشھادة یرجى زیارة موقعنا على الإنترنت www.esma.gov.ae
و الدخول إلى خدمة الإستعلام عن المستندات الصادرة
أى كشط أو تغییر فى ھذه الشھادة یلغیھا.‏
ھاتف +971 4 2944434 Tel.:
فاكس +971 4 2944428 Fax:
ص.ب 48666 دبى ‏،الإمارات العربية المتحدة
P.O.BOX 48666, Dubaii - United Arab Emirates
ھاتف +971 2 4032700 Tel.:
فاكس +971 2 6715999 Fax:
ص.ب 2166 أبو ظبى الإمارات العربية المتحدة
P.O.BOX 2166, Abu Dhabi - United Arab Emirates
600-565554
esma.gov.ae

Scope Appendix
27 Water:Ambient Water, Drinking
Water, Wastewater
28 Water:Ambient Water, Drinking
Water, Wastewater
29 Water:Ambient Water, Drinking
Water, Wastewater
30 Water:Ambient Water, Drinking
Water, Wastewater
31 Water:Ambient Water, Drinking
Water, Wastewater
32 Water:Ambient Water, Drinking
Water, Wastewater
33 Water:Ambient Water, Drinking
Water, Wastewater
34 Water:Ambient Water, Drinking
Water, Wastewater
35 Water:Ambient Water, Drinking
Water, Wastewater
36 Water:Ambient Water, Drinking
Water, Wastewater
37 Water:Ambient Water, Drinking
Water, Wastewater
38 Water: Ambient water, Drinking
water
39 Water: Ambient water, Drinking
water
40 Water: Ambient water, Drinking
water
41 Water: Ambient water, Drinking
water
42 Water: Ambient water, Drinking
water
43 Water: Ambient water, Drinking
water
Determination of Metals by
ICP-OES: Ag, Al, As, Ba, Be,
Ca, Cd, Co, Cr, Cu,Fe, K, Mg,
Mn, Mo, Na, Ni, Pb, Sb,
Se,Sn, V, Zn
Volatile Organic Compounds
by Gas Chromatography /
Mass Spectrometry (GC MS)
Petroleum Hydrocarbons-
Diesel Range Petroleum
Hydrocarbons (DRO)
Petroleum Hydrocarbons-
Gasoline Range Petroleum
Hydrocarbons (GRO)
pH
Chloride Content
Sulphate Content
Total Dissolved Solids
Total Suspended Solids
Biological Oxygen Demand , 5
-Day BOD Test
Total & Dissolved Organic
Carbon (TOC) By High
Temperature Combustion
Method
Total Alkalinity to pH 4.4
Carbonates & Bicarbonates
Chemical Oxygen Demand
(COD)
Oil and Grease
Calcium
Magnesium
SOP005 and SOP003, based on
APHA3120(B) & APHA 3030 B
&F by ICP-OES
SOP013 & SOP014 based on
USEPA 8260C & USEPA 5030C
By Gas Chromatography / Mass
Spectrometry (GC MS)
USEPA 8015D and USEPA
3510C
USEPA 8015D and USEPA
5030C
APHA 4500 H+ B
APHA4500 CI- B
APHA 4500 S042- C
APHA 2540 C
APHA 2540 D
APHA 5210 B
APHA 5310 B & SOP018
APHA 2320 B
APHA 2320 B
APHA 5220 B
APHA 5520 B
APHA 3500Ca B
APHA 3500Mg B
This scope of accreditation is invalid without certificate of accreditation
and cannot be used as a separate document.
This is an electronic certificate and does not require stamp and signature.
Visit ESMA website www.esma.gov.ae to verify this certification.
Any alternation or modification on this certificate will affect its validity.
مجال الإعتماد غیر صالح بدون شھادة الإعتماد
ولایمكن استخدامھ كوثیقة منفصلة
ھذة الشھادة صدرت إلكترونیاً‏ ولا تحتاج إلى ختم وتوقیع.‏
للتأكد من صحة ھذة الشھادة یرجى زیارة موقعنا على الإنترنت www.esma.gov.ae
و الدخول إلى خدمة الإستعلام عن المستندات الصادرة
أى كشط أو تغییر فى ھذه الشھادة یلغیھا.‏
ھاتف +971 4 2944434 Tel.:
فاكس +971 4 2944428 Fax:
ص.ب 48666 دبى ‏،الإمارات العربية المتحدة
P.O.BOX 48666, Dubaii - United Arab Emirates
ھاتف +971 2 4032700 Tel.:
فاكس +971 2 6715999 Fax:
ص.ب 2166 أبو ظبى الإمارات العربية المتحدة
P.O.BOX 2166, Abu Dhabi - United Arab Emirates
600-565554
esma.gov.ae

44 Water: Ambient water, Drinking
water
45 Water: Ambient water, Drinking
water
46 Water: Ambient water, Drinking
water
Total Hardness as CaCO3
Electrical Conductivity @25C°
Fluoride
47 Air Determination Of Nitrogen
Oxides (NO, NO2, NOx),
CO, CO2, SO2, O2, and
CxHy Emissions from
Stationary and Combustion
Sources ,
Boilers and Incinerators Using
Portable Fluegas Analyzer
48 Air Ambient Air Quality
Monitoring by AQM65:SO2,
CO, NO2, NOX, O3 and
particulate matter (TSP, PM1,
PM2.5 and PM 10
49 Air Total Suspended Particulate
Matter (TSPM, Respirable
Suspened Particulate Matter
(RSPM-PM10, 4, 2.5 & 1)
50 Noise Occupational and
Environmental Noise
51 Water: Drinking Water Total Coliforms (IDEXX
Method)
52 Water:Ambient Water, Drinking
Water, Wastewater
53 Water:Ambient Water, Drinking
Water, Wastewater
54 Water:Ambient Water, Drinking
Water, Wastewater
55 Water:Ambient Water, Drinking
Water, Wastewater
56 Water:Ambient Water, Drinking
Water, Wastewater
57 Water:Ambient Water, Drinking
Water, Wastewater
Scope Appendix
Total Coliforms ((Membrane
Filtration M-d)
Fecal Coliforms (IDEXX
Method)
Fecal Coliforms ((Membrane
Filtration M-d)
E-coli (IDEXX Method)
E-coli ((Membrane Filtration
M-d))
Enterococci (IDEXX Method)
APHA 2340 C
APHA 2510 B
APHA 4500 F- D
SOP 046 based on USEPA CTM
30; USEPA CTM 34; EPA
Method 1; EPA Method 7E; EPA
Method 6C; 40CFR, Part 60,
Appendix A, Method 20;ASTM
D6522-11
In-house method SOP 042 using
AQM 65
SOP 043 using ESampler
SOP047 based on ISO 1996
SOP016, based on APHA 9223B
by IDEXX COLILERT &
COLILERT-18 (drinking water
only)
APHA 9222B, SOP022
SOP016, based on APHA 9223B
by IDEXX COLILERT-18
APHA 9222D, SOP023
SOP016, based on APHA 9223B
by IDEXX COLILERT and by
IDEXX COLILERT and
COLILERT-18 (drinking water) &
COLILERT-18 (waste
waters,ambient waters)
APHA 9222G, SOP024
SOP017, based on ASTM D6503
-99 (2009) by IDEXX Enterolert
This scope of accreditation is invalid without certificate of accreditation
and cannot be used as a separate document.
This is an electronic certificate and does not require stamp and signature.
Visit ESMA website www.esma.gov.ae to verify this certification.
Any alternation or modification on this certificate will affect its validity.
مجال الإعتماد غیر صالح بدون شھادة الإعتماد
ولایمكن استخدامھ كوثیقة منفصلة
ھذة الشھادة صدرت إلكترونیاً‏ ولا تحتاج إلى ختم وتوقیع.‏
للتأكد من صحة ھذة الشھادة یرجى زیارة موقعنا على الإنترنت www.esma.gov.ae
و الدخول إلى خدمة الإستعلام عن المستندات الصادرة
أى كشط أو تغییر فى ھذه الشھادة یلغیھا.‏
ھاتف +971 4 2944434 Tel.:
فاكس +971 4 2944428 Fax:
ص.ب 48666 دبى ‏،الإمارات العربية المتحدة
P.O.BOX 48666, Dubaii - United Arab Emirates
ھاتف +971 2 4032700 Tel.:
فاكس +971 2 6715999 Fax:
ص.ب 2166 أبو ظبى الإمارات العربية المتحدة
P.O.BOX 2166, Abu Dhabi - United Arab Emirates
600-565554
esma.gov.ae

Scope Appendix
58 Water Enumeration of Enterococci
(MF Method)
59 Water Sampling for Legionella
Bacteria on Water System
60 Water Detection & Enumeration of
Legionella Sp (Membrane
Filtration method)
61 Water Heterotrophic plate count by
Enzyme Substrate Method
62 Water Heterotrophic plate count by
Pour Plate Method
APHA 9230 C
BS 7592:2008
ISO 11731-2:2004
APHA 9215 E
APHA 9215 B
63 Food Aerobic Plate Count Bacteriological Analytical Manual
(BAM)-Chapter 3, USFDA
64 Food Enumeration of
Enterobacteraceae
65 Food Enumeration of Coliforms by
Colony Count Method
66 Food Enumeration of Coliforms by
MPN Method
67 Food Enumeration of E-Coli by
MPN Method
Method 2.3.1, Manual of
Microbiological Methods for the
Food and Drink Industry,
Campden and Chorelywood for
Research Association
Method 2.2.1, Manual of
Microbiological Methods for the
Food and Drink Industry,
Campden and Chorelywood for
Research Association
Method 9.71, Compendium of
Methods for the Microbiological
Examination of Foods, 5th Edition
Method 9.91, Compendium of
Methods for the Microbiological
Examination of Foods, 5th Edition
68 Food Detection of Salmonella Spp Method 3.1.2, Manual of
Microbiological Methods for the
food and Drink Industry,Campden
and Chorelywood for Research
Association
69 Field Sampling & Testing Standard Penetration Test
(SPT)
BS 1377 Part 9:1990; Cl.3.3
70 Field Sampling & Testing Soil Sampling BS 5930:1999, Cl. 22
71 Field Sampling & Testing Rotary Core Drilling BS 5930:1999, Cl.20.7
72 Field Sampling & Testing Ground Water Level
Measurement
BS 5930:1999, Cl. 23.2.1 to
23.2.3; Cl. 23.2.7 & 23.2.8 &
SOP021
73 Field Sampling & Testing Ground Water Sampling BS 5930:1999, Cl. 23.3
This scope of accreditation is invalid without certificate of accreditation
and cannot be used as a separate document.
This is an electronic certificate and does not require stamp and signature.
Visit ESMA website www.esma.gov.ae to verify this certification.
Any alternation or modification on this certificate will affect its validity.
مجال الإعتماد غیر صالح بدون شھادة الإعتماد
ولایمكن استخدامھ كوثیقة منفصلة
ھذة الشھادة صدرت إلكترونیاً‏ ولا تحتاج إلى ختم وتوقیع.‏
للتأكد من صحة ھذة الشھادة یرجى زیارة موقعنا على الإنترنت www.esma.gov.ae
و الدخول إلى خدمة الإستعلام عن المستندات الصادرة
أى كشط أو تغییر فى ھذه الشھادة یلغیھا.‏
ھاتف +971 4 2944434 Tel.:
فاكس +971 4 2944428 Fax:
ص.ب 48666 دبى ‏،الإمارات العربية المتحدة
P.O.BOX 48666, Dubaii - United Arab Emirates
ھاتف +971 2 4032700 Tel.:
فاكس +971 2 6715999 Fax:
ص.ب 2166 أبو ظبى الإمارات العربية المتحدة
P.O.BOX 2166, Abu Dhabi - United Arab Emirates
600-565554
esma.gov.ae

Scope Appendix
74 Rock Cores Unconfined Compresive
Strength including preparation
of rock cores
ASTM D7012-2014, Method C
and ASTM D4543-2008
75 Rock Cores Rock quality designation BS 5930:1999, Cl.44.4.4
76 Rock Cores Core recovery BS 5930:1999, Cl.44.4.4
77 Description and Classification Description and Classification
of Rocks
BS 5930:1999, CI.44
78 Description and Classification Soil Description BS 5930:1999, CI.41
79 Soil Determination of water
(moisture) content of soil and
rock by mass.
80 Soil Determination of Liquid Limit ,
Plastic Limit and Plasticity
Index of Soil
81 Soil Sedimentation by Hydrometer
Method
BS1377 : Part 2 :1990
(Amd.9027:96), Cl.3.2
BS 1377:1990 Part 2 Amd. 9027-
96 Cl 4.3,4.4,4.5, 5.3 and 5.4
BS1377 : Part 2 :1990
(Amd.9027:96), Cl.9.5
82 Reporting Reporting BS 5930: 2015, Section 10
83 Transparent and opaque liquids Kinematic Viscosity ASTM D445-15a
84 Petroleum products Flash and Fire Points by
Cleveland Open Cup
85 Petroleum products Acid Number of Petroleum
Products by Potentiometric
Titration
86 Petroleum products Base Number of Petroleum
Products by Potentiometric
Titration
87 Petroleum products, lubricating
oils and additives
Determination of water in
petroleum products,
lubricating oils and additives
88 Insulating oil Dielectric Breakdown Voltage
of insulating oil
89 Crude Petroleum and Liquid
Petroleum
Density, Relative Density
(Specific Gravity) or API
Gravity
End
ASTM D92-16
ASTM D664-11a
ASTM D2896-15
ASTM D6304-16
ASTM D877-13
BS EN 60156:1996/ IEC156:1995
ASTM D1298-12b
Program Manager
This scope of accreditation is invalid without certificate of accreditation
and cannot be used as a separate document.
This is an electronic certificate and does not require stamp and signature.
Visit ESMA website www.esma.gov.ae to verify this certification.
Any alternation or modification on this certificate will affect its validity.
مجال الإعتماد غیر صالح بدون شھادة الإعتماد
ولایمكن استخدامھ كوثیقة منفصلة
ھذة الشھادة صدرت إلكترونیاً‏ ولا تحتاج إلى ختم وتوقیع.‏
للتأكد من صحة ھذة الشھادة یرجى زیارة موقعنا على الإنترنت www.esma.gov.ae
و الدخول إلى خدمة الإستعلام عن المستندات الصادرة
أى كشط أو تغییر فى ھذه الشھادة یلغیھا.‏
ھاتف +971 4 2944434 Tel.:
فاكس +971 4 2944428 Fax:
ص.ب 48666 دبى ‏،الإمارات العربية المتحدة
P.O.BOX 48666, Dubaii - United Arab Emirates
ھاتف +971 2 4032700 Tel.:
فاكس +971 2 6715999 Fax:
ص.ب 2166 أبو ظبى الإمارات العربية المتحدة
P.O.BOX 2166, Abu Dhabi - United Arab Emirates
600-565554
esma.gov.ae

Page 1 of 1
From:
Sent:
To:
Subject:
Samah Mohamed Al-Hajeri (ADMA CD) [samah@adma.ae]
Wednesday, March 10, 2010 12:40 PM
nadia.halawi
Follow Up Flag: Follow up
Flag Status: Purple
Dear Ms. Nadia,
Prequalification of you company
Reference to our telephone call as requested you are prequalified with ADMA‐OPCO for the following
service:
‐ 2705‐ LABORATORY SERVICES (CHEMICAL TESTING). INTERMEDIATE
Regards,
Samah Al-Hajeri
Registration & PreQualification Officer
Planning Strategy Team
Commercial Division
Tel. 02-6060458
Fax. 02-6064261
"Hydrogen Sulfide(H2S) gas is an extremely hazardous, toxic & lethal compound "Silent Killer"
H2S can inhibit cellular respiration and uptake of Oxygen, causing biochemical suffocation.
Exposure should be minimized by employing adequate Engineering controls & Safe working practices.
For more information read ADMA-OPCO HSE Regulations Document 102 Chapter 33"
Courtesy HSE&QA Division
Disclaimer:
This message is for the named person's use only. It may contain confidential, proprietary or
legally privileged information. No confidentiality or privilege is waived or lost by any
mistransmission. If you receive this message in error, please immediately delete it and all copies
of it from your system, destroy any hard copies of it and notify the sender. You must not,
directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are
not the intended recipient. ADMA-OPCO and any of its subsidiaries each reserve the right to
monitor all e-mail communications through its networks.
Any views expressed in this message are those of the individual sender, except where the
message states otherwise and the sender is authorized to state them to be the views of any such
entity.
ADMA-OPCO does not guarantee that the delivery of this email is timely, secure, error or virus
free.
Thank You.
__________ NOD32 4930 (20100309) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
08-08-11

From:
Sent:
To:
Cc:
Subject:
SUPPLIER.REGISTRATION@gasco.ae
Monday, February 11, 2008 1:10 PM
acesone@emirates.net.ae
SUPPLIER.REGISTRATION@gasco.ae
Approval of your Application/Questionnaire ID 2737 for Updating as CONTRACTOR.
Please be informed that based on the evaluation of submitted updating Application, your company name has been
included in our list of pre‐qualified contractors for the following services:
Work Group ID W. G. Description
110215 ONSHORE ( GEO TECHNICAL) SURVEYS ‐ PIPELINES & PLANT
361097 LABORATORY TESTING ‐ OIL/GAS/WATER ETC.
361099 MATERIAL TESTING ‐ PAINTING/COATING
380010 BATHYMETRIC SURVEY
Please note that at the time of release of enquiries, a further short listing takes place based on the specific scope of
work.
You are advised to quote your Registration No. 750124 in all future correspondence.
Regards,
HEAD, PROCUREMENT SUPPORT DEPARTMENT
GASCO
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
Disclaimer: The information transmitted in this message is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material. If you are not the intended recipient of this
message you are hereby notified that any use, distribution, reproduction or any action taken in reliance upon this
message is prohibited. If you received this in error, please contact the sender and delete the material from any
computer. Any views expressed in this message are those of the individual sender and may not necessarily reflect
those of GASCO.
1

ARAB CENTER FOR ENGINEERING STUDIES - ( 30769 )
Phone: 0097125502774 - Fax: 0097125502773
Contact: Eng.Yousef Marei - Email: acesone@emirates.net.ae
Work Group
Description
WG110320
WG110350
WG110360
WG110370
WG110520
WG110530
WG120330
WG280130
WG343030
WG361080
WG361100
MARINE SURVEYS
GEOGRAPHIC INFORMATION SERVICES (GIS)
ONSHORE (TOPOGRAPHIC) SURVEYS-PIPELINES AND PLANT
ONSHORE (GEO TECHNICAL) SURVEYS-PIPELINES AND PLANT
SOIL INVESTIGATION AND TESTING SERVICES-OFFSHORE
SOIL INVESTIGATION AND TESTING SERVICES-ONSHORE
STUDIES ON CONSTRUCTION MATERIAL AND TESTING LABORATORY
NDT SERVICES-CONVENTIONAL (UT/MPT/PT/RT AND VISUAL)
UNDERGROUND CABLES/DUCTS/TRENCHES AND ACCESSORIES-MAINTENANCE/SURVEY AND
DETECTION
MATERIAL TESTING-CIVIL
LABORATORY TESTING (ENVIRONMENTAL)-OIL/GAS/GREASE/WATER ETC.
WG361110
MATERIAL TESTING-METALLURGICAL/PAINTING/COATING
WG530070
WG560040
WG570040
WG770020
GEOLOGICAL SERVICES
GEODETIC SURVEYS
LABORATORY TESTING (CHEMICAL)
NOISE SURVEY
1

Owner No Owner Name % Ownership Passport # Phone No Fax No Owner Address
Sponsor No Sponsor Name Passport # Emirate P.O Box Phone No Fax No
001912 ALI & SONS COMPANY - L L C ABU DHABI 915 0097126723900 0097126723901
Abu Dhabi Water & Electricity Authority
ADWEA Enterprise Asset Management System
Supplier Details Report
Company ID : Vendor :N Principal :N
Contractor :Y Associate :N
Manufacturer :N
002644 Company Name : ARAB CENTER FOR ENGINEERING STUDIES ABU DHABI
Company Address Company Type
Street : ICAD 1, Sector M41, Plot 166C5 Telephone : 0097125502774
P.O Box : 5012 Fax : 0097125502773
City : ABU DHABI E-mail : acesone@emirates.net.ae
Emirate : ABU DHABI Home Page :
Country : AE Contact Name : Yousef Al Marei
Establishment Date : 24-JUL-1989
License Description License Expiry Date License/ Certificate No.
Department Of Economic Development - Abu Dhabi 08-FEB-2013 1001759
Chamber of Commerce License 13-DEC-2012 11900
7487 ARAB CENTER FOR ENGINEERING STUDIES 100
Work Group No Work Group Name
3400800 LABORATORY TESTING SERVICES
3600700 Marine Survey
1102350 WATER AND SOIL QUALITY MONITORING
3401600 SOIL & CONCRETE TESTING
1200200 AERIAL AND TOPOGRAPHICAL SURVEYS
1103200 GEOTECHNICAL STUDIES, TESTING AND SOIL INVESTIGATION CONSULTANCY
3400500 MATERIAL TESTING, ANALYSIS AND INSPECTION
Report Name/DB/User Name : suppdetl / GMAXP / ghashaibani
Site ID / Organization ID : ADWEA / ADWEAORG
1 / 2 Report Last Modified : 20-Sep-2010
Report Generated On : 15-Aug-2012 12:09:56 PM

-
المالحظات:‏
- صالحية التسجيل سارية لمدة ثالث سنوات
- عند وجود أي تعديل أو تغيير في بيانات الشركة خالل الفترة أعاله يتم التعديل على موقع األشغال العسكرية www.dmw.gov.ae
- أرقام التواصل بما يخص العطاءات ھاتف 0097124962270 والفاكس 0097124962204 والبريد اإللكتروني tnd@milmail.ae
االسم المسجل : المركز العربي للدراسات الھندسية ابوظبي
: 1001759
المسجلة رقم الرخصة التجارية : 1201-CAA
رقم التسجيل : إستشاري
نوع التسجيل 16/11/2015