Pricebook 2017 No Price EDIT

THERMAL EXPANSION TANKS
14 3
T THERMAL EXPANSION TANKS – Non-ASME
NON-ASME
LISTED MATERIALS
MODELS LISTED
T-5 T-12
T-25 T-30
FIXED DIAPHRAGM
Syst. Wt.
Model Part No. Gal. Accept. Dia. Ht. Conn. (Lbs.)
T-5 32010005 2.1 1.3 7.9 10.8 3/4 5
T-12 32010012 4.8 2.9 10.6 13.7 3/4 9
T-25 32010025 9.3 5.5 15.0 15.7 1 18
T-30 32010030 13.2 7.8 15.0 21.1 1 23
T-42V 32010042 21 12.5 17.7 23.6 1 33
T-60V 32010060 40 23.8 19.7 35.2 1 1/4 60
T-80V 32010080 53 31.5 23.6 33.9 1 1/4 81
T-180V 32010180 79 46.9 24.8 44.7 1 1/4 105
T-260V 32010260 106 63 24.8 57.1 1 1/4 145
T-325V 32010325 132 78.4 29.5 53.1 1 1/4 190
Materials = Steel with Epitaxial ® Inner Liner, Heavy Duty Butyl Diaphragm;
Maximum Pressure = 150 PSIG; Maximum Temperature = 200 o F;
Finish = Blue Powder Coat Exterior; Factory Pre-charge = 30 PSIG
TX THERMAL EXPANSION TANKS – Non-ASME
REMOVABLE BLADDER
Syst. Wt.
Model Part No. Gal. Accept. Dia. Ht. Conn. (Lbs.)
5TX 33022050 2.1 2.1 7.9 12.9 3/4 6
12TX 33022120 4.8 4.8 10.6 16.2 3/4 9
NON-ASME
25TX 33022250 10.6 10.6 12.6 22.5 1 22
30TX 33022300 15.8 15.8 15 28.7 1 31
42TX 33022420 21.1 21.1 17.7 28.9 1 35
60TX 33022600 26.4 26.4 17.7 31.1 1 45
80TX 33022800 52.8 52.8 21.6 42.5 1 1/2 84
180TX 33022900 79.2 79.2 24.8 46.3 1 1/2 111
Materials = Steel, Heavy Duty Butyl Bladder; Maximum Pressure = 150 PSIG;
Maximum Temperature = 240 o F; Finish = Red Powder Coat Exterior;
Factory Pre-charge = 30 PSIG
NON-ASME
2017
PAGE 14.2