Metro Rail News November 2017

More documents

Recommendations

Info

Passengers entering into the railway station, they need to swipe the RFID tag to open the gate to entering into the concern platform. Once the tag is placed in front of the RFID reader circuit, the latter energizes the tag and reads the unique digital data stored it. Then the tag reveals relevant information to the reader circuit. The RFID reader will have the internal memory, which stores the information about the RFID tag and it also links it to the Common Database. The Display in the RFID reader will display the Source and balance information. When the customer reaches the destination, they need to swipe the card to leave from the platform. If the customer have low balance in his card, there may be a "Value Added Machine" available in that platform itself can added the value. the reader circuit placed at the exit point. The platform door will open while entering and leaving from the platform. The cost equivalent to the distance travelled by the user is hence calculated and the same is updated in the common database system. The detailed operation of the system is further explained below. RFID Card RFID Reader Power Supply UART Micro Contr oller LCD Relay Drive In this proposed system, the passengers need not to wait in the ticket counter to get the ticket. It saves the time for the passengers. By this system, we can reduce the fraudulent activities and accidents. GENERAL LAYOUT OF RFID SYSTEM INSTALLED IN THE TRAIN Keypad Buzzer (Operational Principal) Relay DC Motor The RFID reader circuit is installed at the entry point and at the exit of the platform gate. When the passenger enters the platform gate, the passenger should display the tag in front of the reader circuit placed at the platform gate. Similarly, the passenger, while getting down at the desired station, should display the tag in front of The passenger entering the platform should display/place the RFID tag in front of the reader ). When the tag is placed before the reader circuit, the tag gets energized and the reader reads the unique digital data behind it. Hence the tag reveals relevant information to the reader circuit. The reader circuit stores this information in its internal memory temporarily and also links to the common database system which has all the details of the particular passenger. If the information's are correct then the door will open. If the user don’t have the enough balance then the alert tone will be given by the buzzer. Station Rupees 1 A 2 B 3 C Table 2: Station Vs Rupees 28 © METRO RAIL NEWS | NOVEMBER <strong>2017</strong> | WWW.METRORAILNEWS.IN
© METRO RAIL NEWS | NOVEMBER <strong>2017</strong> | WWW.METRORAILNEWS.IN 29
Page 1 and 2: November 2017 / Monthly / Vol. I /
Page 3 and 4: Subscribe METRO RAIL NEWS An exclus
Page 5: 35 First Bullet Train in India: All
Page 8 and 9: Editor’s Note Dear Readers, Seaso
Page 11 and 12: NEWS HIGHLIGHTS NATIONAL OCT 1, 201
Page 13 and 14: © METRO RAIL NEWS | NOVEMBER 2017
Page 16 and 17: Mass Transit System: Security chall
Page 19: terrorist attack trends indicates t
Page 23 and 24: (Picture: A typical underground met
Page 25 and 26: RFID TAG RFID tags are the componen
Page 27: OUR KNOWLEDGE PARTNERS SOME ADVERTI
Page 31 and 32: Hyperloop Technology: Future of Sma
Page 33 and 34: Space X has held initial design com
Page 35 and 36: First Bullet Train in India: All fe
Page 37 and 38: The bullet train or high-speed trai
Page 39 and 40: New Metro Rail Policy: Setting cred
Page 42 and 43: ound of bidding in the Hyderabad me
Page 44 and 45: Metro, and took it up in October 20
Page 46 and 47: Company Name & Location Description
Page 48 and 49: Metro Rail Job Openings Organizatio
Page 50: Invitation to join Metro Rail News

Metro Rail News November 2017

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?