How to Clean the Rollers of the HP Printer?

The following steps will help you remove such contaminations in a rather easy
fashion
1. Turn off the device:
Trust us, under no circumstance should there be allowed any
electrical interference during the maintenance process. To that end,
Turn off the device and disconnect all the power chords.
2. Open the cover
Once there is no interference, you can remove the cover to expose
the print rollers.
3. Remove any paper swill present
Free the roller by removing any residual or full paper from the “in”
and the “out” tray.
4. Get a wet cloth and start cleaning
Once you get the roller exposed, you will see a steel bar with three
wheels. Clean the three rollers manually using a wet cloth.
5. Get a new set of print sheets
Now, you need to get a new set of print sheets to load up in the
system tray. Make sure that the new ones are clean.
Once you have cleaned these “wheels” you can be damn sure that the printouts
that you will receive now will be nothing short of amazing.
The above steps are easy to understand and easier to comprehend. But still, if you
encounter any issue you can contact our experts via our HP printer helpline
number +353-766803285. Our specialists will not only assist you through this
entire process, but they will also avail you with some solutions for some other
issues you might encounter.
Content Source: