GIESSE_Use and Maintenance Manual_EN_web

More documents

Recommendations

Info

GENERAL MAINTENANCE (CLEANING) FOR THE END USER Sliding opening: Lift-and-slide hardware Instructions for use Window handle with 180° handle Sash closed. Never move the sash when the handle is in the closed position; this could cause damage to the closing seals. Window handle with 0° handle Sash in open position. The sash raises and you can open it by sliding it in the opposite direction to the cremone. Sliding opening: Mechanisms for sliding systems Instructions for use Handle with automatic operation The handle is designed for automatic operation. The nylon slider has two green and red surfaces that indicate respectively sash open and sash closed. Handle with manual operation Set the handle in the open position before half-closing the sash, to prevent the nib from improperly hitting the frame. 8
GENERAL MAINTENANCE (CLEANING) FOR THE END USER www.giesse.it Side-hung inward-opening: Tilt-and-slide opening hardware Instructions for use GS1000 - HD GS1000 – HL-ML AUTOMATIC CATCH: Do not accompany the sash when opening or closing. MANUAL CATCH: Pull the sash towards yourself when opening and manually push it when closing. 9
Page 1: HARDWARE USE AND MAINTENANCE MANUAL
Page 4 and 5: GENERAL MAINTENANCE (CLEANING) FOR
Page 12 and 13: GENERAL MAINTENANCE FOR SPECIALISTS
Page 20: www.giesse.it

GIESSE_Use and Maintenance Manual_EN_web

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?