S3 Magazine // Issue 45
Issue 45: Features Focus RS, KROWRX Exo, JDM Jewels, 5.8L Foxbody, Ford Attack, and more.
Issue 45: Features Focus RS, KROWRX Exo, JDM Jewels, 5.8L Foxbody, Ford Attack, and more.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6TH GEN CHEVROLET CAMARO<br />
SUPERCHARGER INSTALL GUIDE<br />
Install the tensioner pulley for the secondary drive using the provided hardware and spacer.<br />
…Closer view of Mounting Plate A installed.<br />
Apply Blue Loctite on cylinder head bolts securing Mounting Plate A.<br />
Install ‘Mounting Plate B’, which will hold both the supercharger and the<br />
secondary drive jackshaft in place.<br />
Install 20mm cog belt, and tighten down tensioner pulley. This will apply<br />
tension to the belt, as well as increase the belt wrap, providing additional belt<br />
contact surface area to the drive pulleys.<br />
Install ‘Discharge Tubes A and B’, along with the ‘Maxflow Race Bypass Valve’<br />
with corresponding coupling sleeves and clamps, connecting the supercharger<br />
to the inlet portion of the charge cooler. Driver’s side headlight can now also<br />
be reinstalled.<br />
‘Mounting Plate C’ can now be mounted and attached to Mounting Plate B.<br />
Install the V-3 Si supercharger onto Mounting Plate B.<br />
Finish installing the V-3 Si supercharger with the<br />
hardware provided.<br />
24 WWW.<strong>S3</strong>MAG.COM ISSUE <strong>45</strong> :: 2017
Change language