Catalogue 2018

More documents

Recommendations

Info

hanit® Recycled Products THE CLEVER SOLUTION HAHN KUNSTSTOFFE GMBH LIMITED CONDITIONS OF SALE 1. DEFINITIONS The following words used in these Terms and Conditions (the“Conditions”) will have the meanings set out as follows: “Company” means HAHN Kunststoffe GmbH „Goods“ mean the products or materials supplied by the Company „Services“ means the whole or any part of the services which the Company is to supply or carry out under the contract “Purchaser” means the corporate entity, firm or person to which the Goods and/or Services are supplied „Order“ means the Purchaser’s purchase order document and, where used, Specification specifying the Goods and/or Services to be supplied. 2. MAKING THE CONTRACT 1. The Company’s quotation constitutes an invitation to treat (i.e. a proposal to enter into a contract) and will unless otherwise stated in the quotation, be open for a period of 30 days beginning with the date of the quotation unless the Company has previously withdrawn it. 2. Any order issued by the Purchaser is subject to acceptance by the Company and a contract will only be formed when the Company has accepted the Purchaser’s order. The quotation, order and acceptance will together form the contract governed by these Conditions. 3. Where these Conditions are in conflict with those set out in any specification, offer to purchase or order received, these Conditions will prevail unless otherwise agreed by the Company in writing. 4. No employee, agent or officer of the Company is authorised to agree to any variation of the Conditions or to agree to the supply of Goods and/or Services by the Company, except subject to these Conditions without variation. A variation made in writing and expressly accepted by a director of the Company is permitted. 3. CANCELLATION/SUSPENSION OF DELIVERIES 1. Once the contract is formed, no cancellation by the Purchaser is permitted expect where expressly agreed by the Company in writing. 2. The Purchaser will in the event of agreed cancellation by the Purchaser indemnify the Company fully against all charges, costs and losses (including loss of profit) sustained by it as a result of the cancellation. 3. The Company may without prejudice to its other rights, suspend or cancel further deliveries and/or work under this and any other contract between the parties hereto if the Purchaser fails to make payment of any sum on its due date for payment, or if the Purchaser becomes insolvent or has any form of insolvency proceedings or action taken against it, including any receivership, petition or order of administration, winding up or bankruptcy, any proposal for or voluntary arrangement with creditors. In such circumstances, the Company will be entitled to immediate payment from the Purchaser in respect of any goods manufactured but not yet delivered in connection with an order from the Purchaser, or in connection with services undertaken for the Purchaser but not completed. 4. The Company may without prejudice to its other rights, where the Purchaser refuses or is unable or fails to take delivery of the Goods by the dates specified in the contract or where no date is specified in the contract, within a reasonable period, either: 3.4.1. put the Goods into its stock at the Purchaser’s risk and expense and submit an invoice for payment as though the Goods had been delivered on the date when they were transferred to stock, or 3.4.2. sell or offer to sell the Goods or any part of them to other interested parties, in which case the Company will be entitled to recover from the Purchaser as liquidated damages the amount of gross profit forgone by the Company on the sale to the Purchaser as certified by the Company, on the basis of the price that would have applied at the date for delivery. 4. PRICE 1. Unless otherwise stated the price payable for the Goods and Services will be that set out in the Company’s quotation and confirmed by its acceptance of the Purchaser’s order. The price and any carriage, packaging or other costs will be exclusive of Value Added Tax. 2. Prices quoted are based on current rates of wages, prices of material, freight and insurance. The Company reserves the right to amend the price at any time prior to delivery of the Goods to take account of any increase in the price to the Company of goods, services, raw materials, labour or other inputs used in the production of the Goods, or currency fluctuations increasing the cost of production or purchasing the Goods. 3. The Company reserves the right to amend its prices where a quotation was based on a stated quantity which is greater or less than the quantity ordered by the Purchaser. 5. TERMS OF PAYMENT 1. The Company will be entitled to payment of the price payable for the Goods upon despatch of the goods and in respect of Services when the Services are in the opinion of the Company substantially complete. 2. Payment is due 30 days from the date of invoice. Time of payment will be deemed to be the essence of the contract. 3. The Company reserves the right to charge interest at 8% per annum above the Bank of England base rate for the time being on all overdue accounts, such interest being deemed to accrue and be compounded on a daily basis from the due date for payment. The Company also reserves the right to raise additional charges in accordance with the Late Payment of Commercial Debts (Interest) Act 1998 as amended by the Late Payment of Commercial Debts Regulations 2002. 4. The Purchaser will not be entitled to withhold, deduct or set off against any sum payable to the Company any amount or claim whatsoever. In particular but without limitation, the Purchaser may not set off any amount or loss or damage arising from alleged defects in Goods received or Services supplied by the Company. 6. DELIVERY 1. The delivery date given by the Company is the best estimate at the time and is likely to fluctuate prior to receipt of a firm order from the Purchaser. The Company will make all reasonable efforts to deliver the Goods on the date given but the Company cannot accept liability for delay or non-delivery occurring for any reason whatsoever. Time of despatch or delivery is not of the essence and a delay in delivery will not entitle the Purchaser to treat the contract as repudiated or to any damages. 2. The Company reserves the right to despatch or make delivery by instalments and to tender a separate invoice in respect of each instalment. 3. Where an order is placed for Goods to be supplied to the Purchaser against time schedules sent to the Company from time to time by the Purchaser, the number or quantity of Goods stated in the order must be accepted by way of delivery within 12 (twelve) calendar months from the date of such order or such other period as the Company has agreed in writing. 4. Where goods are delivered to the Purchaser, the Purchaser will be responsible for unloading unless the Company has expressly agreed to unload the Goods. 5. Carriage is chargeable on all despatches where the Company undertakes delivery. 7. DIVISIBILITY With reference to blanket orders for goods that are subject to call off and to be delivered in instalments, the Company will be entitled to invoice for each instalment as and when each instalment is delivered and invoices will be due and payable on agreed terms in their own right notwithstanding that they are part of a blanket order. 8. RISK AND THE PASSING OF PROPERTY 1. Risk in the goods will pass to the Purchaser when the Goods leave the despatching premises of the Company. 2. So long as any money owed to the Company from the Purchaser is outstanding in respect of the Goods, the property in the Goods will not pass to the Purchaser and the Company will retain title to such Goods until the Purchaser’s indebtedness to the Company has been discharged in full. 3. Until all monies are paid in full, the Purchaser will hold Goods delivered by the Company on a fiduciary basis as Bailee for the Company and should any such Goods be re-sold by the Purchaser, the Purchaser will hold the proceeds of such sale on a like fiduciary basis on the Company’s behalf until the total amount of the Purchaser’s indebtedness has been discharged. 4. Until such time as the property in the Goods pass from the Company, the Purchaser will upon request deliver up such of the Goods as have not ceased to be in existence or been re-sold, to the Company. If the Purchaser fails to do so, the Company may enter any premises owned, occupied or controlled by the Purchaser where the Goods or any item thereof is situated and re-possess the Goods. 9. INSPECTION/SHORTAGES 1. The Company will have no liability for any damage or shortages that would be apparent on careful inspection by the Purchaser unless a written complaint is delivered to the Company within seven days of delivery, detailing the alleged damage or shortage and the Company is allowed access to inspect the affected Goods before any use is made of them. 2. Subject to Condition 9.1. the Company will make good any shortage in the Goods for which it is responsible and where appropriate repair or at its option replace any Goods damaged during loading or unloading by the Company, but otherwise will be under no liability whatsoever arising from such shortage or damage. 10. DEFECTIVE GOODS 1. The Company’s liability in respect of any defect or failure of the Goods supplied or for any loss, injury or damage attributable thereto is confined to making good by replacement or repairing any defects in the Goods themselves arising from faulty design or workmanship on behalf of the Company. 2. The Company’s liability is further limited to defects reported to the Company in writing within 14 days from the date of despatch of those Goods to the Purchaser by the Company. 242 HAHN Kunststoffe GmbH » +49 (0) 65 43 / 98 86-0
3. The Purchaser will assume responsibility for the Goods being of sufficient suitability and quality for the Purchaser’s purpose. 4. The use of recycled materials can cause variations in the Goods, especially colour variation, efflorescence, overflow ridges, pores, shrink holes and surface fissures, in respect of which the Company accepts no liability whatsoever. 11. SAMPLES 1. Notwithstanding that any sample may be exhibited and inspected by the Purchaser to enable the Purchaser to judge the quality of the Goods, it will not constitute a sale by sample under the contract. 2. Any samples exhibited under this clause will remain the property of the Company and will be returned immediately on request. 12. FORCE MAJEURE 1. The Company will not be liable for any failure to carry out its obligations arising from circumstances outside the Company’s reasonable control. 2. Non-exhaustive illustrations of such circumstances included Acts of God, war, riot, explosion, abnormal weather conditions, fire, flood, strikes, lock-outs, government action or regulations (UK or otherwise), delay by suppliers, accidents and shortages of materials, labour or manufacturing facilities. 3. If the circumstances preventing the performance of the contract are still continuing three months after the said circumstances have arisen, then either party may give written notice to the other cancelling the contract and neither party shall be under any further liability to the other except that the Purchaser will be liable to pay the contract price less a reasonable allowance for what has not been performed by the Company. 13. SEVERANCE If any term herein will be held to be void or unenforceable for any reason whatsoever, but would be valid if part of the wording were deleted, then the term will apply with such modification as will make it valid and effective whilst preserving to the maximum extent its intended effect. 14. PROPER LAW AND JURISDICTION The contract will be governed by English Law and any dispute or action arising out of these Conditions or related to the substance of other otherwise in connection with these Conditions will be subject to the exclusive jurisdiction of the English Courts. 15. HEADINGS The headings of these Conditions are for convenience only and will have no effect on the interpretation. MARCH 2016 WARRANTY FOR hanit ® RECYCLED PLASTIC PRODUCTS 1. DURATION OF WARRANTY For orders starting from 01 January 2011 the companies of the HAHN Group guarantee that hanit® plastics recycling products are delivered free of material defects and will not show any for 20 years after delivery. Colouring is not a part of this warranty. 2. MATERIAL PROPERTIES OF HANIT® PLASTIC RECYCLING PRODUCTS Plastic recycling products may show variations in colour and dimension (up to 3%). Recycling products may show production-related textured surfaces, inclusions, and cavities. Due to this, the given weight and dimensions are approximate only. 3. WARRANTY CONDITIONS We will replace hanit® plastic recycling products after thorough inspection, should our goods be found to be defective during the warranty period in spite of proper application and use (Replacement Delivery Guarantee). Installation and application of our products according to assembly and installation instructions on hand are a prerequisite for warranty adjustments. Any reimbursements of transport costs, installation, re-installation, consequential damage, disassembly, or other costs are excluded from this warranty. 4. WARRANTY HANDLING For correct and speedy processing in case of a warranty claim, please contact us in writing and include the following documentation: - a copy of the invoice - a detailed description of the defect - photos and/or a sample of the faulty product 5. EXCLUSION OF WARRANTY The following items do not constitute warranty claims: a) defects that can be ascribed to normal wear b) defects like e.g. discolouration and expansion caused by weather and climatic conditions c) defects caused by actions of the customer or third parties (improper use and assembly, modification of the product, use of parts from other suppliers, inappropriate transport, packaging, and storage). d) second quality and remaining stock sales e) custom-made products, industrial profiles, finished parts and systems f) goods not manufactured by companies of the HAHN Group g) Reinforced posts, warranty for this product is restricted to 5 years. 6. PLACE OF JURISDICTION The place of jurisdiction shall be the supplier‘s registered business address. This warranty is valid in addition to our general terms of sales and delivery. The laws of Germany shall apply exclusively. Hahn-Flughafen, 01.12.2017 IMPRINT HAHN Kunststoffe GmbH Gebäude 1027 55483 Hahn-Flughafen Phone: + 49 (0) 6543 9886 - 0 Email: info@hahnkunststoffe.de Web: www.hahnkunststoffe.de DESIGN Werbeagentur zweipunktnull GmbH · www.zweipunktnull.de COPYRIGHT Reprinting, even of extracts, is prohibited without the written approval of HAHN Kunststoffe GmbH and, where approval is given, the corresponding reference to the source must be provided. The same shall apply to recording in electronic databases and reproductions on CD-ROM. MISCELLANEOUS We cannot be liable for print errors. Subject to errors; we reserve the right to make any technical changes and improvements. Printed colours may vary slightly from the originals. All product illustrations alike. Product illustrations are not to scale. PICTURE CREDITS 3D-models: zweipunktnull, Photos: Thorsten Gauls · www.gauls-die-fotografen.com, Photostock: www.fotolia.de, www.istockphoto.com, 500px.com For more information go to » www.hanit.de 243
Page 1 and 2:
www.hahnkunststoffe.com HAHN KUNSTS
Page 3 and 4:
CONTENTS » Palisades » U-profiles
Page 5 and 6:
Opeka forest bench 104 211 Privacy
Page 7 and 8:
A MAN AND HIS VISION IN THE FOOTSTE
Page 9 and 10:
For more information go to » www.h
Page 11 and 12:
12.5 mt Current use of plastics fro
Page 13 and 14:
Page 15 and 16:
BEAUTIFUL PATIOS, DURABLE POSTS 2,0
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
01 BUILDING AND CONSTRUCTION 1 ...a
Page 23 and 24:
:: 01 BUILDING & CONSTRUCTION :: 02
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
BUILT TO LAST. 02 FENCING AND BARRI
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
03 GROUNDWORK AND SURFACES For the
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
04 OUTDOOR SPACES AND FURNITURE Lik
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
FUN, PLAYFUL AND SAFE. 05 PLAYGROUN
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
06 PROJECT REALISATION From concept
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192: :: 01 BUILDING & CONSTRUCTION :: 02
Page 239 and 240: “WHERE ARE THE TABLES?” There a
Page 241: TIPS FOR PROCESSING RECYCLED PROFIL
Page 245 and 246: CONTACT FORM ENQUIRY PICK-UP ORDER
Page 247 and 248: For more information go to » www.h
show all

Catalogue 2018

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?