34 EPOXIES, ELECTRICAL TAPE & F<strong>USE</strong> HOLDER ADHESIVES ADHESIVEs & epoxies 31.8265-S 2 oz. J-B Weld Our flagship product, the original J-B Weld is the world’s finest cold weld compound. J-B Weld is a remarkably easy, convenient, and inexpensive alternative to alternative to welding, soldering, and brazing. J-B Weld will bond to virtually any clean, dry surface including: iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, concrete, fiberglass, wood, some plastics, and many more. When mixed in equal portions at room temperature (70°F), J-B Weld will set in 4-6 hours, and cure in 16-24 hours. J-B Weld is waterproof; petroleum, chemical, and acid resistant when fully cured. It can be drilled, tapped, machined, filed, sanded, and painted. J-B Weld is superstrong, nontoxic, and temperature resistant up to 600°F. No wonder ask for it by name! (6 per case) 31.8267-S 2 oz. J-B Stik is our newest “must have” product. J-B Stik Weld is a hand kneable, steel-reinforced epoxy putty adhesive/sealant that will plug holes and make permanent repairs on wet and dry surfaces. It will even cure completely submerged in water or GASOLINE! Simply knead thoroughly, with your fingers, a portion necessary for the repair and apply. J-B Stik will fully cure in 2-30 minutes; and can be drilled, sanded, filed, tapped, machined, and painted. J-B Stik requires no tools or “prep time”, and makes no mess. (6 per case) F<strong>USE</strong> HOLDERS ELECTRICAL TAPE UR L LISTED 59 0J 31.8276 2 oz. J-B Kwik is a fast-set, fast-cure version of the original J-B Weld. Though not as strong as J-B Weld, J-B Kwik is perfect for need-to-fix-it-fast repairs at home, on the farm, or in the shop. When mixed in equal portions at room temperature (70°F), J-B Kwik will set in 4 MINUTES, and cure in 4-6HOURS! Use J-B Kwik on iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, concrete, fiberglass, wood, some plastics, and other clean, dry surfaces. J-B Kwik is nontoxic, and temperature resistant up to 300°F. When fully cured, J-B Kwik is waterproof, petroleum, chemical, and acid resistant. J-B Kwik can be drilled, tapped, machined, filed, sanded, and painted. J-B Kwik is “kwikly” establishing its name in the market. (6 per case) 31.8277 2 oz. Water Weld Water weld is the perfect companion product to our epoxy line. This epoxy putty will plug holes and make permanent repairs in moistsurface or under water applications. Waterweld will even repair leaking fuel tanks! Simply pull off the amount of Waterweld necessary for the job, knead it with your fingers until the two colors are thoroughly mixed, then push the product into the hole. Waterweld will fully cure in 20-30 minutes, and can be drilled, sanded, filed tapped, machined, and painted. Nontoxic and approved by the National Sanitation Foundation for use with potable water, Waterweld turns do-it-yourselfers into professionals. (6 per case) 16.1212 Heavy duty blade fuse holder 12 piece per card / Price per card. (10 inner pack / 40 per master pack) 17.3460 Electrical tape UL approved. Size: ¾” x 60’ Packaged: 10 rolls per sleeve. Price per sleeve. (25 sleeves per master pack)
MEGA BLAST mega blast horn 35 EXTREMELY WARNING LOUD METAL BASE & TRUMPET # 1 QUALITY # 1 CUSTOMER SATISFACTION MEGA BLAST 22.520 (Black) Dual Metal Balck Air Horns. Dual Heavy Duty Compressors One Very Loud Simultaneous Diesel Sound. Hardware & Relay included. Overall horn length: 13” x 15” (8 per master pack) mega blast horn HORNS EXTREMELY WARNING LOUD METAL BASE & TRUMPET # 1 QUALITY # 1 CUSTOMER SATISFACTION 22.000 Mega Blast Horn Display (1 Display per Box) 22.522 (Chrome) Dual Metal Chrome Plated Air Horns. Dual Heavy Duty Compressors. One Very Loud Simultaneous Diesel Sound. Hardware & Relay included. Overall horn lengths: 13” x 15”. 12 Volts (8 per master pack) MEGA BLAST DISPLAY AIR COMPRESSOR HORN & DISPLAY