e-l-m Pricebook 2018-01
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
E.L.M. Switch control knob<br />
With the installation of the Switch control knob, you<br />
have the possibility to control two hydraulic functions<br />
from one operating handle, by means of a solenoid<br />
valve. On the side of the control knob there is a switch,<br />
which when activated switches between these two<br />
functions. On the handle, there is also a diode indicator<br />
showing which function is on.<br />
The Switch control knob must be mounted on the operating handle of the<br />
truck, either by welding or by cutting a thread at the end of the axle.<br />
Then you lock the control knob with the spring pin and connect the wires as<br />
showed on the illustration.<br />
The set consists of:<br />
- 1 control knob<br />
- 3 [m] wire<br />
- 1 axle ø30 x 60 [mm]<br />
- 1 spring pin ø5 x 30 [mm]<br />
To be connected to the solenoid valve<br />
Plus (+)<br />
Indicator<br />
Ground (-)<br />
Axle<br />
Spring pin<br />
Part number<br />
DKK<br />
Price<br />
EUR<br />
12-48 v 52250 0202 2.345,- 315,-<br />
114