GME Supply Product Catalog Version 16.3

PETZL ABSORBICA
Tear-webbing energy absorber,
for use in combination with a
JANE lanyard to make an energyabsorbing
lanyard; maximum length
of two meters; ends equipped with
STRING to hold the connector in
position and protect the sling from
abrasion; compact and lightweight.
L57 - $58.95
PETZL ASAP’SORBER
LANYARD WITH
ENERGY ABSORBER
Connects the ASAP or ASAP LOCK
mobile fall arrester to the harness,
allows the user to distance himself
from the rope in order to declutter the
work area and protect the rope from
sharp tools and molten metal splash,
absorbs the energy of a fall by the
tearing of specific stitching, available
in (2) lengths for a choice of the best
balance between distance from the
rope and reducing the fall length.
L71AA 20 20 cm - $40.95
L71 AA 40 40 cm - $50.95
PETZL ASAP MOBILE FALL ARRESTER
Arrests falls, slides, and uncontrolled descents; works on vertical
or angled rope, locks on the rope even if grabbed during the fall,
moves up or down the rope without any manual manipulation of
the device, easy to install and remove at any point on the rope,
may be combined with an ASAP’SORBER energy absorbing lanyard
to work at a distance from the rope, comes with an OK TRIACT-
LOCK automatic locking carabiner.
B71AAA - $229.95
PETZL ASAP LOCK
MOBILE FALL ARRESTER
Integrated locking function allows the user to
immobilize the device to reduce the length of
a fall. In case of a strong wind, this function
also prevents the rope from being blown
upward. Arrests falls, slides, and uncontrolled
descents; works on vertical or angled rope,
locks on the rope even if grabbed during
the fall, moves up or down the rope without
any manual manipulation, easy to install and
remove at any point on the rope, connection
arm makes the system loss-resistant when
passing intermediate anchors, is used with an
ASAP’SORBER energy absorbing lanyard to
work at a distance.
B71ALU - $264.95
ROPE & RESCUE // ROPE GRABS & ASCENDERS
KONG BACK-UP
MOBILE FALL
ARRESTER
Supports fall factor 2 falls in
a semi-dynamic way, without
damage to the safety rope;
works on vertical or angled
rope; moves up or down along
the rope without manual
intervention; easy to install and
remove at any point on the rope;
for rope access applications unit
can be used with tug cord; 10.0
to 12.0 mm semi-static ropes
(EN 1891 type A) certified with
the device.
802 - $147.99
DBI SALA
ROPE-SAFE
MOBILE/STATIC
ROPE GRAB WITH
ATTACHED EZ-STOP
Easy to use automatic to manual
operation switch; integrated tow cord;
built-in swivel; swivel cover; built-in
anti-panic grip; triple action aluminum
carabiner; (2) person rescue
load rated up to 440 lbs;
for use with 27/64 in. to
1/2 in. (10.5 - 13.0 mm)
kernmantle rope; 1’
integral energy absorbing lanyard.
8700620 1’ lanyard - $379.99
8700643 2’ laynard - $379.99
8700621 3’ lanyard - $379.99
MIO ROPE GRAB
Stainless steel self-trailing
rope grab, removable
dual action pin for
easy placement, grips
automatically in the event
of a fall and dissipates the
energy of the fall by slipping
along the rope, comes with
lanyard and ANSI snaphook,
for use with 1/2” rope.
RG1200 1/2” rope -
$160.00
RG5834 5/8” rope -
$160.00
RG716 7/16” rope -
$160.00
(800) 940-6762
61