Fix Ricoh Printer Error Code SC 552
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
How to <strong>Fix</strong> <strong>Ricoh</strong> <strong>Printer</strong> <strong>Error</strong> <strong>Code</strong> <strong>SC</strong> <strong>552</strong>?
<strong>Ricoh</strong> <strong>Printer</strong> <strong>Error</strong> <strong>Code</strong> <strong>SC</strong> <strong>552</strong> is a typical fusing thermistor<br />
error. Avail instant solution via <strong>Ricoh</strong> <strong>Printer</strong> Tech Support Number<br />
1-800-610-6962 to deal with this error. You can easily fix <strong>Ricoh</strong><br />
<strong>SC</strong> <strong>552</strong> <strong>Error</strong> <strong>Code</strong> using simple effective solutions.<br />
The error code in general represents fusing error inside the<br />
thermistor. When the fusing lamp is not properly connected, you<br />
can get this error. There are many other possibilities for this error.<br />
Several other thermistor issues can cause this error. You need to<br />
check each and troubleshoot them separately. You can also<br />
encounter this error is the thermistor is gone bad or bent<br />
somehow. When the thermistor position is not correct, this error<br />
code can pop up suddenly. Sometimes it can get clogged with<br />
toner and shows you this error.
Solution1: Removing Paper Jam<br />
It is possible that the thermistor is somehow mechanically damaged due to a<br />
paper jam. Look for a paper jam inside the <strong>Ricoh</strong> device. To do so, you need to<br />
open up your printing device and remove all sort of small piece of papers that<br />
are being struck inside the printer. Also free the printing rollers from debris<br />
piece of papers to get rid of this issue easily.<br />
Solution2: Reset <strong>Ricoh</strong> <strong>Printer</strong><br />
If the error code still persists, resetting your printer will help you to dismiss<br />
this error. Reset your printer using tech mode and observe the 1-106 temp<br />
settings.<br />
While the machine is warming up, you need to go through the temp settings<br />
carefully. Sometimes, the thermistor needs a heat lamp.<br />
Solution3: Cleaning of the Build-up Toner<br />
If there is a toner build-up on the hot roller thermistor, clean it properly to<br />
get rid of this error effectively.
CONTACT US<br />
Address :<br />
California City, CA 93505, USA<br />
Email : support@printertechsupportnumbers.com<br />
Toll Free- : 1-800-610-6962<br />
Visit at us -:<br />
http://printertechsupportnumbers.com/blog/how-to-fixricoh-printer-error-code-sc-<strong>552</strong>/
Change language