18003358177 Steps To Set-up NETGEAR VueZone System (1)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>18003358177</strong> <strong>Steps</strong> <strong>To</strong> <strong>Set</strong>-<strong>up</strong> <strong>NETGEAR</strong><br />
<strong>VueZone</strong> <strong>System</strong>
<strong>Steps</strong> to set-<strong>up</strong> Netgear <strong>VueZone</strong> system is<br />
as follows<br />
Step 1: Connect the base station with your network<br />
Here the very first step is to establish a proper power<br />
connection to the base station and an Ethernet cable<br />
which is visible in the base station or on any available<br />
port on the router. However, a blue Internet light will<br />
flash continuously once users have established a valid<br />
connection. As suggested by Netgear router<br />
s<strong>up</strong>port team, install camera batteries carefully and at<br />
the same time insert battery, close battery cover and<br />
wait to power on your camera.
Step 2: Sync your cameras to the base<br />
station<br />
• The next step is to place cameras within 12 inches<br />
of the base station. Be careful while you press and<br />
release the sync button located on the top of the<br />
base station. <strong>To</strong> set-<strong>up</strong> Netgear <strong>VueZone</strong> system,<br />
power on the camera while watching the light on<br />
the front camera. Users will see it blinking very<br />
rapidly for at least 4 seconds. Confirm its synching<br />
process which may take <strong>up</strong> to 45 seconds.
Connect with our tech s<strong>up</strong>port engineers<br />
and get experience world-class solution at<br />
your desk!
Change language