Ferreterro 2018 Catalogue

Sleeves for Lifitng Slings
Sleeves for Lifting Slings
Sleeves are used on lifting slings to provide safety from cutting. Due to
sleeves, the slings can be used to lift extremely cut prone products and
also these not damage the edges of product. Sleeves are made to lift
Glass, steel blades, girders, slit coils, wooden logs and give extra long life
to slings. Usage of sleeves at workplace is a must . We, at Ferreterro, give
free anti-abrasive sleeves for slings above 50 tons and occasionally in
smaller slings for the user to know the advantages of sleeves. We have a
large variety of sleeves as per requirement of job. The sleeves stick to the
job and sling moves in freely to adjust itself and resist abrasion or cutting
giving extra life and safety.
FERRETEXX is Extreme condition sleeve to lift almost anything.
Sharp coils, Ultra sharp edges are now easiest job for synthetic
slings. Available in both Round slings and Flat webbing slings for
loads upto 300 tons. These sleeves stick to the job and are
extremely cut resistant. To be used for super sharp cut edges.
Anti abrasive sleeves increase life of slings upto 10 times. Made of HTPY
and strongly constructed are available in PU impregnated and regular
features
Polyurethane blended sleeve upto 30 tons capacity. Clear construction
to view damages to webbing. Side stitches with triple AA on stitches for
extra long life.
Also available in Heavy duty steel corners with
magnets . Saves your chains, Wire rope and
webbing from damages. Also saves edges getting
damaged from lifting as an empty cavity is
created while lifting.
INNOVATION : Anti Cut Polyurethane blend sheet sandwiched in
Abrasive resistant sleeves for extremely heavy duty applications where
both anticut and anti abrasive properties are required, made at high
temperature to maintain properties. Available in loop design slip on and
Velcro type . PATENT PENDING.
46
47