SIMALFA® Inline-Production EN

www.simalfa.ch | water-based adhesives
ALFA Klebstoffe AG | Vor Eiche 10 | CH-8197 Rafz
T +41 43 433 30 30 | F +41 43 433 30 33 | info@alfa.swiss | www.alfa.swiss
Inline Production
NO TEMPORARY STORAGE. PACK IMMEDIATELY.
THE EFFICIENT ADHESIVE
SIMALFA ® 360 is a high-solid, solvent-free dispersion adhesive for the bonding of foams by roller application. Fast drying, high flexibility and one-sided
application distinguish SIMALFA ® 360 as the adhesive for efficient producers. Pack and ship your workpieces immediately after pressing. And because
there is no memory effect on the end product, SIMALFA ® 360 is ideal for roll packing.
Pack mattresses immediately after production with the especially for the inline production designed SIMALFA ® adhesives.
Maximize efficiency, reduce storage space requirements (no temporary storage) and increase process reliability at the same
time. Ideal for the efficient, time-saving and cost-effective bonding of foams.
Max.
100%
70%
74%
1-sided
NO
MAXIMUM
EFFICIENCY
100%
SOLVENT-FREE
74%
SOLID CONTENT
1-SIDED
APPLICATION
NO TEMPORARY
STORAGE
INLINE-PRODUCTION WITH SIMALFA ®
Conventionally bonded foam mattresses require several hours of drying time until the liquid content of the adhesive has vaporized so far, that a problem-free
packaging is possible. Thanks to the specially designed adhesives for inline production, the drying process can be significantly shortened.
The SIMALFA ® 360 adhesive enables immediate packaging without a “memory effect” in roll packed mattresses. This maximizes your production and
minimizes your storage costs.
PRODUCTION
HIGHLIGHTS
3 Inline production
3 Immediate packaging
3 Maximum efficiency
3 High process reliability
3 Time savings in production
3 Suitable for roll packing
3 High instant tack
3 Reduced consumption
3 No temporary storage
3 No memory effect
3 One-sided application
3 Solvent-free
Adhesive application: SIMALFA ® 360 is applied by roller to the foam parts you want to bond. One-sided adhesive application is
sufficient, thanks to the special formulation of the adhesive.
Forced drying: Extract water from the adhesive with an infrared drying tunnel or a circulating air oven and activate the strong
initial tack of SIMALFA ® 360.
Assembling: After drying, the individual parts are joined together. If necessary, the foam parts can also be easily repositioned in
this step. This gives you the flexibility to easily and quickly do corrections.
Pressing: The pressing process activates SIMALFA ® 360 and the adhesive obtains its final adhesion. After pressing, the workpiece
can be further processed immediately.
Packing: Bonded foams can be rolled, packed and transported immediately after being pressed. Long drying
times, high space requirements and the so-called "memory effect" are a thing of the past. This makes
SIMALFA ® 360 the first choice for an efficient mattress production.
Online
www.simalfa.ch/inline-production
Inline Production
SIMALFA ® 360