Peak Catalog

AIRCRAFT CABLE • WIRE ROPE •RIGGING HARDWARE 

CHAIN •LIFTING SLINGS •TIE-DOWNS

TERMS & CONDITIONS 

Peak Trading Corporation does not make any warranties of 

merchantability or fitness for any particular purpose or any 

other warranty, express or implied. Unless specifically stated, 

products are of commercial quality and standards. Buyer 

must determine suitability for the products particular use or 

purpose and will assume any and all risk and liability whatsoever 

resulting from the use of all products, whether used 

singly or in combination with other products or components. 

If requested and/or applicable, manufacturer’s material 

certifications may be provided with no representations made 

as to their accuracy. 

ORDERING INFORMATION 

Ordering hours are 8:00 AM to 5:00 PM, EST, Monday through 

Friday. If faxing an order, please include a daytime phone 

number. 

PRICING 

We will do our best to maintain current prices. However, due 

to fluctuating prices of raw materials, pricing is subject to 

change without notice. 

CREDIT CARDS 

We accept the following major credit cards: VISA, MasterCard, 

Discover and American Express. 

INVOICE TERMS 

Billing terms are net 30 days from the date of invoice for 

approved credit accounts. The minimum invoice amount is 

$50.00. 

SALES TAX 

New York State sales tax is required on all orders picked 

up or delivered in New York unless your New York State 

tax exemption certificate is on file with our office. All other 

applicable taxes are the purchaser’s responsibility. 

LATE CHARGES 

A finance charge of 1.5% per month will be added to all past 

due accounts. Accounts with a past due balance are ineligible 

for additional shipments until the outstanding balance and 

finance charges are paid in full. 

NOTICE OF DEFECT OR DAMAGE 

Buyer is responsible to inspect all products upon receipt of 

order. Claims for damages, shortages or defects must be 

made within 30 days of original receipt of goods. All claims 

not made, in writing to Peak Trading Corporation within 30 

days of original receipt of goods shall be deemed waived. 

Peak Trading Corporation will not pay any claim for labor, 

delays, or damage by reason of their use. No products shall 

be returned without prior consent and Return Authorization 

Number (RA Number). 

To request a Return Authorization Number by phone, please 

call 800.952.7325 or 845.338.1325 between 8:30 am – 

5:00 pm EST. To contact us by email, be sure to include your 

order number, account number, and the item number(s) for 

the item(s) you want to return. 

RETURNED MERCHANDISE 

Our goal is 100% customer satisfaction. If merchandise 

needs to be returned, it must have an RGA number. Merchandise 

cannot be returned without prior approval from Peak 

Trading. Requests for returns must be made within 30 days 

of original receipt of goods. All returns must be in salable 

condition. If the merchandise is being returned as a result of 

customer error, we will charge a 15% restocking fee plus any 

outbound and inbound freight charges. Custom assemblies 

and custom lengths of cable, wire rope, and chain are not 

returnable. 

RETURNED CHECKS 

A $20.00 fee will be charged for any check returned to Peak 

Trading. 

FREIGHT CHARGES 

All materials are sold F.O.B. Shipping Point. Freight prepaid 

on orders over 1,000 lbs. Peak Trading reserves the right to 

ship by the carrier of its choice. Any damage in transit or loss 

of freight is the responsibility of the carrier. Claims should be 

made directly to the freight carrier.

Table of Contents 

Aircraft Cable 

Aircraft Cable-Galvanized 3 

Aircraft Cable-Galvanized Vinyl Coated 3 

Aircraft Cable-SS 4 

Blocks 

Snatch Blocks 30 

Wire Rope Blocks (Small) 28 

Wood Shell Blocks 31 

Chain 

G100 Lifting Chain 19 

G30 Proof Coil Chain 19 

G30 Proof Coil Chain SS 19 

G70 Transport Chain YC 19 

Jack Chain, Single-Double 19 

Loop Chain, Single-Double 19 

Lifting Slings 

Chain Slings 16 

Roundslings 17 

Synthetic Web Slings 17 

Wear Pads 18 

Wire Rope Bridles 15 

Wire Rope Slings 14 

Rigging Hardware 

Beam Clamps 31 

Clevis Grab Hooks 23 

Clevis Slip Hooks 24 

Cold Shuts 25 

Connecting Links 25 

Eye Hoist Hooks 23 

Eye Bolts 27 

Eye Nuts 25 

Fist Grips 10 

Forged Links 24 

Hammerlocks 25 

Lag Eye Screws 28 

Lap Links 25 

Quick Links 25 

Quick Links - SS 26 

S Hooks 26 

Shackles 22 

Spring Hooks 25 

Swage Fittings 11 

Swage Stops 12 

Swivels 29 

Thimbles 12 

Turnbuckles 20 

Wire Rope Clips 10 

Rope 

3-Strand Rope 36 

Strand 

Strand - Galvanized 5 

Tie Down Equipment 

Binder Chains 35 

Load Binders 35 

Ratchet Straps 35 

Tools-Cutting & Swaging 

Bolt-Chain Cutters 34 

Swaging Tools 32 

Wire Rope Cutters 34 

Wire Rope 

Wire Rope-Bright General Purpose 5 

Wire Rope-Galvanized General Purpose 7 

Wire Rope-Stainless Steel 9 

Our Mission 

We at Peak Trading Corporation are 100% committed 

to exceeding your expectations in pricing, service 

and satisfaction. Understanding our customers’ 

needs and responding to them promptly are the 

cornerstone of our company philosophy. You will 

always be greeted by our friendly and knowledgeable 

staff who will help in any way they can. We carry a 

substantial amount of stock for immediate shipment. 

If you don’t see what you are looking for in this 

catalog, please ask and we will be happy to fulfill 

your request. Our commitment to you is sincere. Our 

purpose is to create opportunity, enrichment and 

extraordinary achievement for everyone we touch. 

VISIT OUR WEBSITE... 

www.peaktrading.com 

To find our complete line of 

PRODUCTS 

Phone: 800.952.7325 Fax: 845.338.1372 

Products and pricing are subject to availability, and may change without notice. 

2

Aircraft Cable-Galvanized 

7x7 Galvanized Aircraft Cable 

• Made in accordance with Federal Specification 

RR-W-410G 

• Available in a variety of put-ups 


Korean 


RR-W-410G 


Item ID Size MBS (lbs) Available Put Ups 

106-GAC7/062-XXXX 1/16” 480 250’, 500’, 1000’, 5000’ 

106-GAC7/093-XXXX 3/32” 920 250’, 500’, 1000’, 5000’ 

106-GAC7/125-XXXX 1/8” 1700 250’, 500’, 1000’, 5000’ 

106-GAC7/156-XXXX 5/32” 2600 250’, 500’, 1000’, 5000’ 

106-GAC7/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’ 

106-GAC7/250-XXXX 1/4” 6100 250’, 500’, 1000’, 5000’ 


Korean 


RR-W-410G 



106K-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’ 

106K-GAC9/125-XXXX 1/8” 2000 250’, 500’, 1000’, 5000’ 

106K-GAC9/156-XXXX 5/32” 2800 250’, 500’, 1000’, 5000’ 

106K-GAC9/187-XXXX 3/16” 4200 250’, 500’, 1000’, 5000’ 

106K-GAC9/218-XXXX 7/32” 5600 250’, 500’, 1000’, 5000’ 

106K-GAC9/250-XXXX 1/4” 7000 250’, 500’, 1000’, 5000’ 

106K-GAC9/312-XXXX 5/16” 9800 250’, 500’, 1000’, 5000’ 

106K-GAC9/375-XXXX 3/8” 14,400 250’, 500’, 1000’, 5000’ 

7x7 Vinyl Coated Galvanized 

Aircraft Cable Clear 


RR-W-410G 



106K-GAC7/062-XXXX 1/16” 1700 250’, 500’, 1000’, 5000’ 

106K-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’ 

106K-GAC7/125-XXXX 1/8” 480 250’, 500’, 1000’, 5000’ 

106K-GAC7/156-XXXX 5/32” 2600 250’, 500’, 1000’, 5000’ 

106K-GAC7/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’ 

106K-GAC7/250-XXXX 1/4” 6100 250’, 500’, 1000’, 5000’ 



RR-W-410G 



107-VGAC7047/062-XXXX 3/64-1/16 270 250’, 500’, 1000’, 5000’ 

107-VGAC7062/093-XXXX 1/16-3/32” 480 250’, 500’, 1000’, 5000’ 

107-VGAC7062/125-XXXX 1/16-1/8” 480 250’, 500’, 1000’, 5000’ 

107-VGAC7093/125-XXXX 3/32-1/8” 920 250’, 500’, 1000’, 5000’ 

107-VGAC7093/187-XXXX 3/32-3/16” 920 250’, 500’, 1000’, 5000’ 

107-VGAC7125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’ 


Aircraft Cable Black 


RR-W-410G 



106-GAC7/093-XXXX 3/32” 1000 250’, 500’, 1000’, 5000’ 

106-GAC9/125-XXXX 1/8” 2000 250’, 500’, 1000’, 5000’ 

106-GAC9/156-XXXX 5/32” 2800 250’, 500’, 1000’, 5000’ 

106-GAC9/187-XXXX 3/16” 4200 250’, 500’, 1000’, 5000’ 

106-GAC9/218-XXXX 7/32” 5600 250’, 500’, 1000’, 5000’ 

106-GAC9/250-XXXX 1/4” 7000 250’, 500’, 1000’, 5000’ 

106-GAC9/312-XXXX 5/16” 9800 250’, 500’, 1000’, 5000’ 

106-GAC9/375-XXXX 3/8” 14,400 250’, 500’, 1000’, 5000’ 


107-VGAC7B062/093-XXXX 1/16-3/32” 480 250’, 500’, 1000’, 5000’ 

107-VGAC7B062/125-XXXX 1/16-1/8” 480 250’, 500’, 1000’, 5000’ 

107-VGAC7B093/125-XXXX 3/32-1/8” 920 250’, 500’, 1000’, 5000’ 

107-VGAC7B093/187-XXXX 3/32-3/16” 920 250’, 500’, 1000’, 5000’ 

107-VGAC7B125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’ 

3 Free Shipping on Orders Over 1,000 lbs 

* Some restrictions apply to overweight items.

Aircraft Cable 


Aircraft Cable Clear 

• Made in accordance with E3:H15h Federal 

Specification RR-W-410G 


7x19 Stainless Steel Aircraft Cable 

T304 


RR-W-410G 



107-VGAC9125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’ 

107-VGAC9187/250-XXXX 3/16-1/4” 3700 250’, 500’, 1000’, 5000’ 

107-VGAC9250/312-XXXX 1/4-5/16” 6400 250’, 500’, 1000’, 5000’ 

107-VGAC9312/375-XXXX 5/16-3/8” 5400 250’, 500’, 1000’, 5000’ 

107-VGAC9375/437-XXXX 3/8-7/16” 14,400 250’, 500’, 1000’, 5000’ 


109-SSAC9/304/125-XXXX 1/8” 1760 250’, 500’, 1000’, 5000’ 

109-SSAC9/304/156-XXXX 5/32” 2400 250’, 500’, 1000’, 5000’ 

109-SSAC9/304/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’ 

109-SSAC9/304/218-XXXX 7/32” 5000 250’, 500’, 1000’, 5000’ 

109-SSAC9/304/250-XXXX 1/4” 6400 250’, 500’, 1000’, 5000’ 

109-SSAC9/304/312-XXXX 5/16” 9000 250’, 500’, 1000’, 5000’ 

109-SSAC9/304/375-XXXX 3/8” 12,000 250’, 500’, 1000’, 5000’ 


Aircraft Cable Black 


RR-W-410G 



T316 


RR-W-410G 



107-VGAC9B125/187-XXXX 1/8-3/16” 1700 250’, 500’, 1000’, 5000’ 

107-VGAC9B187/250-XXXX 3/16-1/4” 3700 250’, 500’, 1000’, 5000’ 

107-VGAC9B250/312-XXXX 1/4-5/16” 6400 250’, 500’, 1000’, 5000’ 

107-VGAC9B312/375-XXXX 5/16-3/8” 5400 250’, 500’, 1000’, 5000’ 

107-VGAC9B375/437-XXXX 3/8-7/16” 14,400 250’, 500’, 1000’, 5000’ 


109-SSAC7/316/062-XXXX 1/16” 360 250’, 500’, 1000’, 5000’ 

109-SSAC7/316/093-XXXX 3/32” 700 250’, 500’, 1000’, 5000’ 

109-SSAC7/316/125-XXXX 1/8” 1360 250’, 500’, 1000’, 5000’ 


T304 


RR-W-410G 



T316 


RR-W-410G 



109-SSAC7/304/062-XXXX 1/16” 480 250’, 500’, 1000’, 5000’ 

109-SSAC7/304/093-XXXX 3/32” 920 250’, 500’, 1000’, 5000’ 

109-SSAC7/304/125-XXXX 1/8” 1700 250’, 500’, 1000’, 5000’ 

109-SSAC7/304/156-XXXX 5/32” 2400 250’, 500’, 1000’, 5000’ 

109-SSAC7/304/187-XXXX 3/16” 3700 250’, 500’, 1000’, 5000’ 


109-SSAC9/316/125-XXXX 1/8” 1300 250’, 500’, 1000’, 5000’ 

109-SSAC9/316/187-XXXX 3/16” 2900 250’, 500’, 1000’, 5000’ 

109-SSAC9/316/250-XXXX 1/4” 4900 250’, 500’, 1000’, 5000’ 

109-SSAC9/316/312-XXXX 5/16” 7600 250’, 500’, 1000’, 5000’ 

109-SSAC9/316/375-XXXX 3/8” 11,000 250’, 500’, 1000’, 5000’ 

Phone: 800.952.7325 Fax: 845.338.1372 


4

Strand / Wire Rope 

1x7 Common Strand 

• Our 1x7 Common Grade Galvanized Strand (Guy 

Strand) is very pliable and great for splicing. 

This common strand is used for many of the 

same applications as our Extra High Strength 

Galvanized Strand, but it is easily manipulated 

by hand. When bending, common grade strand 

will stay bent. Galvanized finish provides 

strength and corrosion protection over time. We 

stock 1x7 common strand in 1/8, 3/16, 1/4, 

5/16 and 3/8 inch diameters. Sold in custom 

lengths and coil form. Meets ASTM A-475-03 

Class A specification. 


112-GSTR7/125-XXXX 1/8” 540 250’, 500’ 

112-GSTR7/187-XXXX 3/16” 1150 250’, 500’ 

112-GSTR7/250-XXXX 1/4” 1900 250’, 500’ 

112-GSTR7/312-XXXX 5/16” 3200 250’, 500’ 

112-GSTR7/375-XXXX 3/8” 4250 250’, 500’ 

1x7 EHS Strand 

• Our 1x7 Extra High Strength (EHS) Galvanized 

Strand (Guy Strand) is commonly used by 

arborists and linemen for bracing and tensioning 

applications because it has excellent tensile 

strength and very little stretch. Galvanized finish 

provides strength and corrosion protection over 

time. For use with Tree Grips or Cable Clips or 

other Guy Grip Products. Cannot be spliced. Sold 

in custom lengths and coil form. Meets ASTM 

A-475-03 Class A specification. 


112-GSTR7EHS187-XXXX 3/16” 3990 250’, 500’ 

112-GSTR7EHS250-XXXX 1/4” 6650 250’, 500’ 

112-GSTR7EHS312-XXXX 5/16” 11,200 250’, 500’ 

112-GSTR7EHS375-XXXX 3/8” 15,400 250’, 500’ 

6x25 Fiber Core Bright Wire 

Rope 

• Made in accordance with Federal 

Specification RR-W-410D 

• It is available in Improved Plow Steel and 

Extra Improved Plow Steel 

6x25 IWRC Bright Wire Rope 



• Available in Improved Plow Steel and 


Item ID Size MBS (tons) Put Up (ft) 

140-S19XIP0250-0000 1/4” 3.4 Per ft 

140-S25XIP0312-0000 5/16” 5.27 Per ft 

140-S25XIP0375-0000 3/8” 7.55 Per ft 

140-S25XIP0437-0000 7/16” 10.2 Per ft 

140-S25XIP0500-0000 1/2” 13.3 Per ft 

140-S25XIP0562-0000 9/16” 16.8 Per ft 

140-S25XIP0625-0000 5/8” 20.6 Per ft 

140-S25XIP0750-0000 3/4” 29.4 Per ft 

140-S25XIP0875-0000 7/8” 39.8 Per ft 

We Make Custom Assemblies! 

Wire Rope Winchlines / Slings / Assemblies 

Aircraft Cable Winchlines / Slings / Assemblies 

Synthetic Rope Winchlines / Slings / Assemblies 

Chain Slings / Assemblies 


Rope Korean 






140-F19IPS0250-0000 1/4” 2.74 Per ft 

140-F25IPS0312-0000 5/16” 4.26 Per ft 

140-F25IPS0375-0000 3/8” 6.1 Per ft 

140-F25IPS0437-0000 7/16” 8.3 Per ft 

140-F25IPS0500-0000 1/2” 10.7 Per ft 

140-F25IPS0562-0000 9/16” 13.5 Per ft 

140-F19IPS0625-0000 5/8” 16.7 Per ft 

140-F25XIP0750-0000 3/4” 23.8 Per ft 

140-F25XIP0875-0000 7/8” 32.2 Per ft 


140K-F25XIP0250-0000 1/4” 2.74 Per ft 

140K-F25XIP0312-0000 5/16” 4.26 Per ft 

140K-F25XIP0375-0000 3/8” 6.1 Per ft 

140K-F25XIP0437-0000 7/16” 8.27 Per ft 

140K-F25XIP0500-0000 1/2” 10.7 Per ft 

140K-F25XIP0562-0000 9/16” 13.5 Per ft 

140K-F25XIP0625-0000 5/8” 16.7 Per ft 

140K-F25XIP0750-0000 3/4” 32.2 Per ft 

140K-F25XIP0875-0000 7/8” 32.2 Per ft 



Wire Rope-Bright General Purpose 


Korean 



• Extra Improved plow steel 


Rope Korean 






140K-S25XIP0250-0000 1/4” 3.4 Per ft 

140K-S25XIP0312-0000 5/16” 5.27 Per ft 

140K-S25XIP0375-0000 3/8” 7.55 Per ft 

140K-S25XIP0437-0000 7/16” 7.55 Per ft 

140K-S25XIP0500-0000 1/2” 13.3 Per ft 

140K-S25XIP0562-0000 9/16” 16.8 Per ft 

140K-S25XIP0625-0000 5/8” 20.6 Per ft 

140K-S25XIP0750-0000 3/4” 29.4 Per ft 

140K-S25XIP0875-0000 7/8” 32.2 Per ft 

140K-S25XIP1000-0000 1” 51.7 Per ft 

140K-S25XIP1125-0000 1-1/8” 65 Per ft 

140K-S25XIP1250-0000 1-1/4” 79 Per ft 

140K-S25XIP1375-0000 1-3/8” 96 Per ft 

140K-S25XIP1500-0000 1-1/2” 114 Per ft 


140K-F37XIP0250-0000 1/4” 2.74 Per ft 

140K-F37XIP0312-0000 5/16” 4.26 Per ft 

140K-F37XIP0375-0000 3/8” 6.1 Per ft 

140K-F37XIP0437-0000 7/16” 8.27 Per ft 

140K-F37XIP0500-0000 1/2” 10.7 Per ft 

140K-F37XIP0562-0000 9/16” 13.5 Per ft 

140K-F37XIP0625-0000 5/8” 20.9 Per ft 

140K-F37XIP0750-0000 3/4” 29.4 Per ft 

140K-F37XIP0875-0000 7/8” 29.8 Per ft 


Rope 










140-F37IPS0250-0000 1/4” 2.74 Per ft 

140-F37IPS0312-0000 5/16” 4.26 Per ft 

140-F37IPS0375-0000 3/8” 6.1 Per ft 

140-F37IPS0437-0000 7/16” 8.27 Per ft 

140-F37IPS0500-0000 1/2” 10.7 Per ft 

140-F37IPS0562-0000 9/16” 13.5 Per ft 

140-F37IPS0625-0000 5/8” 16.7 Per ft 

140-F37IPS0750-0000 3/4” 23.8 Per ft 

140-F37IPS0875-0000 7/8” 32.2 Per ft 


140-S37XIP0250-0000 1/4” 3.4 Per ft 

140-S37XIP0312-0000 5/16” 5.27 Per ft 

140-S37XIP0375-0000 3/8” 7.55 Per ft 

140-S37XIP0437-0000 7/16” 10.2 Per ft 

140-S37XIP0500-0000 1/2” 13.3 Per ft 

140-S37XIP0562-0000 9/16” 16.8 Per ft 

140-S37XIP0625-0000 5/8” 20.9 Per ft 

140-S37XIP0750-0000 3/4” 29.4 Per ft 

140-S37XIP0875-0000 7/8” 29.8 Per ft 

Phone: 800.952.7325 Fax: 845.338.1372 


6

Wire Rope 


Korean 




6x25 Fiber Core Galv Wire 

Rope Korean 






140K-S37XIP0250-0000 1/4” 3.4 Per ft 

140K-S37XIP0312-0000 5/16” 5.27 Per ft 

140K-S37XIP0375-0000 3/8” 7.55 Per ft 

140K-S37XIP0437-0000 7/16” 10.2 Per ft 

140K-S37XIP0500-0000 1/2” 13.3 Per ft 

140K-S37XIP0562-0000 9/16” 16.8 Per ft 

140K-S37XIP0625-0000 5/8” 20.6 Per ft 

140K-S37XIP0750-0000 3/4” 29 Per ft 

140K-S37XIP0875-0000 7/8” 39.8 Per ft 

140K-S37XIP1000-0000 1” 51.7 Per ft 

140K-S37XIP1125-0000 1-1/8” 65 Per ft 

140K-S37XIP1250-0000 1-1/4” 79.9 Per ft 

140K-S37XIP1375-0000 1-3/8” 96 Per ft 

140K-S37XIP1500-0000 1-1/2” 114 Per ft 

140K-S37XIP1625-0000 1-5/8” 132 Per ft 

140K-S37XIP1750-0000 1-3/4” 153 Per ft 

140K-S37XIP2000-0000 2” 198 Per ft 


141K-F25XIP0375-0000 3/8” 6.8 Per ft 

141K-F25XIP0437-0000 7/16” 9.2 Per ft 

141K-F25XIP0500-0000 1/2” 12 Per ft 

141K-F25XIP0625-0000 5/8” 18.5 Per ft 

141K-F25XIP0562-0000 9/16” 15 Per ft 

141K-F25XIP0750-0000 3/4” 26.5 Per ft 

141K-F25XIP0875-0000 7/8” 35.8 Per ft 

141K-F25XIP1000-0000 1” 46.5 Per ft 

141K-F25XIP1125-0000 1-1/8” 58.5 Per ft 

141K-F25XIP1250-0000 1-1/4” 71.9 Per ft 

141K-F25XIP1375-0000 1-3/8” 102 Per ft 

141K-F25XIP1500-0000 1-1/2” 118.8 Per ft 


Rope 





6x25 IWRC Galv Wire Rope 



• Extra Improved Plow Steel 


141-F19IPS0375-0000 3/8” 5.49 Per ft 

141-F19IPS0437-0000 7/16” 7.4 Per ft 

141-F19IPS0500-0000 1/2” 9.63 Per ft 

141-F19IPS0562-0000 9/16” 12 Per ft 

141-F19IPS0625-0000 5/8” 15 Per ft 

141-F19IPS0750-0000 3/4” 21.4 Per ft 

141-F19IPS0875-0000 7/8” 29 Per ft 


141-S25XIP0375-0000 3/8” 6.8 Per ft 

141-S25XIP0437-0000 7/16” 9.2 Per ft 

141-S25XIP0500-0000 1/2” 12 Per ft 

141-S25XIP0562-0000 9/16” 15.1 Per ft 

141-S25XIP0625-0000 5/8” 18.5 Per ft 

141-S25XIP0750-0000 3/4” 26.5 Per ft 

141-S25XIP0875-0000 7/8” 35.8 Per ft 



Wire Rope-Galvanized General Purpose 


Korean 



• Extra Improved Plow Steel 


Rope Korean 

• Our Wire Rope is made in accordance 

with Federal Specification RR-W-410G 




141K-S25XIP0375-0000 3/8” 6.8 Per ft 

141K-S25XIP0437-0000 7/16” 9.2 Per ft 

141K-S25XIP0500-0000 1/2” 12 Per ft 

141K-S25XIP0562-0000 9/16” 15.1 Per ft 

141K-S25XIP0625-0000 5/8” 18.5 Per ft 

141K-S25XIP0750-0000 3/4” 26.5 Per ft 

141K-S25XIP0875-0000 7/8” 35.8 Per ft 

141K-S25XIP1000-0000 1” 46.8 Per ft 

141K-S25XIP1125-0000 1-1/8” 58.5 Per ft 

141K-S25XIP1250-0000 1-1/4” 71.9 Per ft 

141K-S25XIP1375-0000 1-3/8” 86.4 Per ft 

141K-S25XIP1500-0000 1-1/2” 102.6 Per ft 


Rope 






141K-F37XIP0250-0000 1/4” 2.47 Per ft 

141K-F37XIP0312-0000 5/16” 3.83 Per ft 

141K-F37XIP0375-0000 3/8” 5.5 Per ft 

141K-F37XIP0437-0000 7/16” 7.4 Per ft 

141K-F37XIP0500-0000 1/2” 9.63 Per ft 

141K-F37XIP0562-0000 9/16” 12.2 Per ft 

141K-F37XIP0625-0000 5/8” 15 Per ft 

141K-F37XIP0750-0000 3/4” 21.4 Per ft 

141K-F37XIP0875-0000 7/8” 29 Per ft 







141-F37XIP0250-0000 1/4” 2.47 Per ft 

141-F37XIP0312-0000 5/16” 3.83 Per ft 

141-F37XIP0375-0000 3/8” 5.49 Per ft 

141-F37XIP0437-0000 7/16” 7.4 Per ft 

141-F37XIP0500-0000 1/2” 9.6 Per ft 

141-F37XIP0562-0000 9/16” 12.2 Per ft 

141-F37XIP0625-0000 5/8” 15 Per ft 

141-F37XIP0750-0000 3/4” 21.4 Per ft 

141-F37XIP0875-0000 7/8” 29 Per ft 


141-S37XIP0250-0000 1/4” 3.1 Per ft 

141-S37XIP0312-0000 5/16” 4.7 Per ft 

141-S37XIP0375-0000 3/8” 6.8 Per ft 

141-S37XIP0437-0000 7/16” 9.2 Per ft 

141-S37XIP0500-0000 1/2” 12 Per ft 

141-S37XIP0562-0000 9/16” 15 Per ft 

141-S37XIP0625-0000 5/8” 18.5 Per ft 

141-S37XIP0750-0000 3/4” 26.5 Per ft 

141-S37XIP0875-0000 7/8” 35.8 Per ft 

Phone: 800.952.7325 Fax: 845.338.1372 


8

Wire Rope 

6x37 IWRC Galvanized Wire 

Rope Korean 




6x37 IWRC SS T304 Wire Rope 






141K-S36XIP0250-0000 1/4” 3.1 Per ft 

141K-S37XIP0312-0000 5/16” 4.7 Per ft 

141K-S37XIP0375-0000 3/8” 6.8 Per ft 

141K-S37XIP0437-0000 7/16” 9.2 Per ft 

141K-S37XIP0500-0000 1/2” 12 Per ft 

141K-S37XIP0562-0000 9/16” 12 Per ft 

141K-S37XIP0625-0000 5/8” 15.1 Per ft 

141K-S37XIP0750-0000 3/4” 18.5 Per ft 

141K-S37XIP0875-0000 7/8” 26.5 Per ft 

141K-S37XIP1000-0000 1” 46.5 Per ft 

141K-S37XIP1125-0000 1-1/8” 58.5 Per ft 

141K-S37XIP1250-0000 1-1/4” 71.9 Per ft 

141K-S37XIP1375-0000 1-3/8” 86.4 Per ft 

141K-S37XIP1500-0000 1-1/2” 102.6 Per ft 

Item ID Size MBS (lbs) Put Up (ft) 

142-S37/304/0437-0000 7/16” 16,300 Per ft 

142-S37/304/0500-0000 1/2” 22,800 Per ft 

142-S37/304/0562-0000 9/16” 28,500 Per ft 

142-S37/304/0625-0000 5/8” 35,000 Per ft 

142-S37/304/0750-0000 3/4” 49,600 Per ft 

142-S37/304/0875-0000 7/8” 58,000 Per ft 

142-S37/304/1000-0000 1” 85,400 Per ft 

Measuring Wire Rope 

6x25 IWRC SS T304 Wire Rope 





INCORRECT 

CORRECT 

Item ID Size MBS (lbs) Put Up (ft) 

142-S25/304/0437-0000 7/16” 16,300 Per ft 

142-S25/304/0500-0000 1/2” 22,800 Per ft 

142-S25/304/0562-0000 9/16” 28,500 Per ft 

142-S25/304/0625-0000 5/8” 35,000 Per ft 

142-S25/304/0750-0000 3/4” 49,600 Per ft 

142-S25/304/0875-0000 7/8” 66,500 Per ft 

142-S25/304/1000-0000 1” 85,400 Per ft 

To Properly measure wire rope, measure the greatest 

distance of the outer circle. It is very important to 

measure wire rope correctly to an accurate rope size. 



Wire Rope Clips 

Malleable Wire Rope Clips 

• High-Quality Electro-Galvanized Steel 

Fist Grip Wire Rope Clips 

• Our Fist Grip Wire rope Clips are used in 

combination with wire rope and a thimble to 

make a secure wire loop 

• Clips are galvanized for corrosion resistance 

• These clips meet Federal Specification 

FF-C-450 Type III, Class 1, except for those 

provisions required of the contractor 

Item ID Size Min Clips Weight 

115-WRCM0062 1/16” 2 0.02 lbs 

115-WRCM0125 1/8” 2 0.03 lbs 

115-WRCM0187 3/16” 2 0.06 lbs 

115-WRCM0250 1/4” 2 0.11 lbs 

115-WRCM0312 5/16” 2 0.14 lbs 

115-WRCM0375 3/8” 2 0.21 lbs 

115-WRCM0500 1/2” 3 0.36 lbs 

115-WRCM0437 7/16” 4 0.44 lbs 

115-WRCM0562 9/16” 4 0.59 lbs 

115-WRCM0625 5/8” 4 0.54 lbs 

115-WRCM0750 3/4” 4 0.79 lbs 

115-WRCM0875 7/8” 4 1.16 lbs 

115-WRCM1000 1” 5 1.43 lbs 

Drop Forged Wire Rope Clips 

• Our Drop Forged Wire Rope Clips are 

constructed of high quality hot dip galvanized, 

drop forged steel 

Item ID Size Min Clips Min Turn Back (in) Weight 

115-WRCDF0125 1/8” 2 3.25” 0.06 lbs 

115-WRCDF0187 3/16” 2 3.75” 0.10 lbs 

115-WRCDF0250 1/4” 2 4.75” 0.20 lbs 

115-WRCDF0312 5/16” 2 5.25” 0.31 lbs 

115-WRCDF0375 3/8” 2 6.50” 0.47 lbs 

115-WRCDF0437 7/16” 2 7” 0.76 lbs 

115-WRCDF0500 1/2” 3 11.5” 0.80 lbs 

115-WRCDF0562 9/16” 3 12” 1.02 lbs 

115-WRCDF0625 5/8” 3 12” 1.04 lbs 

115-WRCDF0750 3/4” 4 18” 1.50 lbs 

115-WRCDF0875 7/8” 4 19” 2.40 lbs 

115-WRCDF1000 1” 5 26” 2.60 lbs 

115-WRCDF1125 1-1/8” 7 44” 4.00 lbs 

115-WRCDF1250 1-1/4” 7 44” 4.44 lbs 

115-WRCDF1375 1-3/8” 8 54” 4.63 lbs 

115-WRCDF1500 1-1/2” 8 54” 5.90 lbs 

115-WRCDF1750 1-3/4” 8 58” 9.34 lbs 

115-WRCDF2000 2” 8 71” 13.00 lbs 


115-WRCFG0187/250 3/16-1/4” 2 4” 0.23 lbs 

115-WRCFG0312 5/16” 2 5” 0.30 lbs 

115-WRCFG0375 3/8” 2 5-1/4” 0.40 lbs 

115-WRCFG0437/500 7/16-1/2” 3 11” 0.62 lbs 

115-WRCFG0562/625 9/16-5/8” 3 13-1/2” 1.03 lbs 

115-WRCFG0750 3/4” 3 16” 1.75 lbs 

115-WRCFG0875 7/8” 4 26” 2.25 lbs 

115-WRCFG1000 1” 5 37” 3.00 lbs 

Also available in Type 316 stainless steel 

SS Malleable Wire Rope Clips 

• Our SS Malleable Wire Rope Clips are 

constructed of high quality Type 304 stainless 

steel 


116-304-WRCM0062 1/16” 2 0.03 lbs 

116-304-WRCM0125 1/8” 2 0.04 lbs 

116-304-WRCM0187 3/16” 2 0.07 lbs 

116-304-WRCM0250 1/4” 2 0.19 lbs 

116-304-WRCM0312 5/16” 2 0.19 lbs 

116-304-WRCM0375 3/8” 3 0.22 lbs 

116-304-WRCM0500 1/2” 3 0.39 lbs 

SS Drop Forged 

Wire Rope Clips 

• Stainless Steel 

• Forged Type 304 



116-304-WRCDF0062 1/16” 2 0.05 lbs 

116-304-WRCDF0125 1/8” 2 0.05 lbs 

116-304-WRCDF0187 3/16” 2 0.10 lbs 

116-304-WRCDF0250 1/4” 2 0.18 lbs 

116-304-WRCDF0312 5/16” 2 0.31 lbs 

116-304-WRCDF0375 3/8” 3 0.47 lbs 

116-304-WRCDF0500 1/2” 3 0.75 lbs 

Phone: 800.952.7325 Fax: 845.338.1372 


10

Fist Grips / Swage Sleeves 

SS Fist Grip Wire Rope Clips 

• Our Fist Grip Wire rope Clips are used in 

combination with wire rope and a thimble to 

make a secure wire loop 

• Clips are galvanized for corrosion resistance 

• These clips meet Federal Specification 

FF-C-450 Type III, Class 1, except for those 


ZP Copper Swage Sleeves 

• Capable of supporting the rated breaking 

strength of the cable when properly 

applied 


341-S0122-C007 1/4” 2 4” 0.23 lbs 

341-S0122-C008 5/16” 2 5” 0.30 lbs 

341-S0122-C010 3/8” 2 5-1/4” 0.40 lbs 

341-S0122-C013 1/2” 3 11” 0.62 lbs 

341-S0122-C016 5/8” 3 13-1/2” 1.03 lbs 

341-S0122-C020 3/4” 3 16” 1.75 lbs 

Aluminum Swage Sleeves 

• Capable of supporting 95% of the rated 

breaking strength of the cable to which 

they are applied 

Item ID Size Material Weight 

115-CSL062ZP 1/16” Zinc Plated Copper 0.01 lbs 










115-CSL500ZP 1/2” Zinc plated Copper 0.39 lbs 


115-ASL062 1/16” Aluminum 0.01 lbs 








Copper Swage Sleeves 

• Capable of supporting the rated breaking 

strength of the cable when properly 

applied 

SS Swage Sleeves 

• Use SS Sleeves to lap and eye-splice 

stainless steel cable and wire rope 

• Ideal for general outdoor, marine, 

corrosive and other harsh environments 

Item ID Size Weight 

116-304-SL046 3/64” 0.01 lbs 

116-304-SL062 1/16” 0.01 lbs 

116-304-SL093 3/32” 0.01 lbs 

116-304-SL125 1/8” 0.01 lbs 

116-304-SL187 3/16” 0.02 lbs 

116-304-SL218 7/32” 0.03 lbs 

116-304-SL250 1/4” 0.04 lbs 

116-304-SL312 5/16” 0.06 lbs 


115-CSL062 1/16” Copper 0.01 lbs 

115-CSL093 3/32” Copper 0.01 lbs 

115-CSL125 1/8” Copper 0.02 lbs 

115-CSL156 5/32” Copper 0.02 lbs 

115-CSL187 3/16” Copper 0.05 lbs 

115-CSL250 1/4” Copper 0.08 lbs 

115-CSL312 5/16” Copper 0.12 lbs 

115-CSL375 3/8” Copper 0.16 lbs 

When properly applied, Aluminum Swage 

Sleeves are capable of supporting 95% of 

the rated breaking strength of the cable. 

Copper Swage Sleeves are capable of 

holding the rated breaking strength of the 

aircraft cable. 



Swage Stops / Thimbles 

Aluminum Swage Stops 

• Capable of holding only 1/3 to 1/2 of 

the rated breaking strength of the cable 

to which they are attached 

AN Type Thimbles 

• Enhance the longevity of the cable by 

protecting loop ends from wearing out 

and causing fraying 

• Zinc Plated, Carbon Steel 

• Meet all AN-100 Specifications 


115-AST062 1/16” 0.01 lbs 

115-AST093 3/32” 0.01 lbs 

115-AST125 1/8” 0.01 lbs 

115-AST156 5/32” 0.01 lbs 

115-AST187 3/16” 0.01 lbs 

115-AST250 1/4” 0.02 lbs 

115-AST312 5/16” 0.02 lbs 

115-AST375 3/8” 0.05 lbs 


115-TAN062 1/16” 0.01 lbs 

115-TAN093/125 3/32 & 1/8” 0.01 lbs 

115-TAN187 3/16” 0.01 lbs 

115-TAN250 1/4” 0.02 lbs 

115-TAN312 5/16” 0.04 lbs 

115-TAN375 3/8” 0.09 lbs 

Copper Swage Stops 

• Capable of holding only 1/3 to 1/2 of 

the rated breaking strength of the cable 

to which they are attached 

Standard Duty Thimbles 

• Meets the performance requirements 

of Federal Specification FF-T-276b Type 

III, except for those provisions required 

of the contractor 

• Hot Dip Galvanized Steel 


115-CST062 1/16” 0.01 lbs 

115-CST093 3/32” 0.01 lbs 

115-CST125 1/8” 0.01 lbs 

115-CST156 5/32” 0.01 lbs 

115-CST187 3/16” 0.01 lbs 

115-CST250 1/4” 0.06 lbs 

115-CST312 5/16” 0.05 lbs 

115-CST375 3/8” 0.04 lbs 


115-TSD0125 1/8” 0.03 lbs 

115-TSD0187 3/16” 0.03 lbs 

115-TSD0250 1/4” 0.04 lbs 

115-TSD0312 5/16” 0.04 lbs 

115-TSD0375 3/8” 0.06 lbs 

115-TSD0500 1/2” 0.13 lbs 

115-TSD0625 5/8” 0.25 lbs 

115-TSD0750 3/4” 0.50 lbs 

115-TSD0875 7/8” 0.85 lbs 

115-TSD1000 1” 1.04 lbs 

Swage Stops are capable of holding 

1/3 to 1/2 the rated breaking strength. 

Phone: 800.952.7325 Fax: 845.338.1372 


12

Thimbles 

Heavy Duty Thimbles 

• Longer service life and greater 

protection against wear and 

deformation of the wire rope eye 

• Meets the performance requirements 

of Federal Specification FF-T-276b Type 

III, except for those provisions required 

of the contractor 

• Hot Dip Galvanized Steel 

SS Standard Duty Thimbles 

• Made from Type 304 Stainless Steel. 



115-THD0250 1/4” 0.07 lbs 

115-THD0312 5/16” 0.11 lbs 

115-THD0375 3/8” 0.24 lbs 

115-THD0500 1/2” 0.51 lbs 

115-THD0625 5/8” 0.75 lbs 

115-THD0750 3/4” 1.32 lbs 

115-THD0875 7/8” 1.76 lbs 

115-THD1000 1” 2.20 lbs 


116-304-TSD0250 1/4” 0.03 lbs 

116-304-TSD0312 5/16” 0.05 lbs 

116-304-TSD0375 3/8” 0.06 lbs 

116-304-TSD0500 1/2” 0.11 lbs 

116-304-TSD0625 5/8” 0.25 lbs 

116-304-TSD0750 3/4” 0.28 lbs 

116-304-TSD1000 1” 0.46 lbs 

116-304-TSD0062 1/16” 0.03 lbs 

SS AN Type Thimble 

• Our Stainless Steel AN Type Thimbles 

are designed to meet the most 

demanding marine, aircraft or 

industrial requirements 

SS Heavy Duty Thimbles 

• Type 304 Stainless Steel 

• Our Stainless Steel AN Type Thimbles are 

designed to meet the most demanding 

marine, aircraft or industrial requirements 



116-304-TAN062 1/16” 0.01 lbs 

116-304-TAN093 3/32” 0.01 lbs 

116-304-TAN125 1/8” 0.01 lbs 

116-304-TAN187 3/16” 0.01 lbs 

116-304-TAN250 1/4” 0.02 lbs 

116-304-TAN312 5/16” 0.04 lbs 

116-304-TAN375 3/8” 0.07 lbs 



116-304-THD0250 1/4” 0.07 lbs 

116-304-THD0312 5/16” 0.11 lbs 

116-304-THD0375 3/8” 0.25 lbs 

116-304-THD0500 1/2” 0.51 lbs 

116-304-THD0625 5/8” 0.75 lbs 

116-304-THD0750 3/4” 1.20 lbs 

116-304-THD1000 1” 2.20 lbs 

For Pricing: Contact your Sales Rep 

or email us at cs@peaktrading.com 



Wire Rope Slings 

Item ID 

Wire 

Size 

Eye & Eye Wire Rope Slings 

Import 

• Premium wire rope slings made 

to exacting specifications by our 

fabrication team 

• High quality Korean wire rope with 

flemish eye splices and mechanically 

swaged steel sleeves 

• Individually tagged with rated 

capacities per OSHA specifications 

Vertical WLL 

(tons) 

Choker WLL 

(tons) 

050K-S25/0250X002 1/4” 0.65” 0.48 2’ 

050K-S25/0312X002 5/16” 1 0.74 2’ 

050K-S25/0375X002 3/8” 1.4 1.1 2’ 

050K-S25/0437X002 7/16” 1.9 1.4 2’ 

050K-S25/0500X002 1/2” 2.5 1.9 2’ 

050K-S25/0625X003 5/8” 3.9 2.9 3’ 

050K-S25/0875X004 7/8” 7.6 5.6 4’ 

050K-S25/1000X005 1” 9.8 7.2 5’ 

050K-S25/0750X004 3/4” 5.6 4.1 4’ 

050K-S37/1125X005 1-1/8” 12 9.1 5’ 

050K-S37/1250X006 1-1/4” 15 11 6’ 

Base Length 

(ft) 

Item ID 

Wire 

Size 

Thimble & Thimble Wire Rope 

Slings Import 



fabrication teamHigh quality American 

wire rope with flemish eye splices and 

mechanically swaged steel sleeves 



Vertical WLL 

(tons) 

Choker WLL 

(tons) 

050K-S25T/0250X002 1/4” 0.65” 0.48 2’ 

050K-S25T/0312X002 5/16” 1 0.74 2’ 

050K-S25T/0375X002 3/8” 1.4 1.1 2’ 

050K-S25T/0437X002 7/16” 1.9 1.4 2’ 

050K-S25T/0500X002 1/2” 2.5 1.9 2’ 

050K-S25T/0625X004 5/8” 3.9 2.9 3’ 

050K-S25T/0750X003 3/4” 5.6 4.1 4’ 

050K-S25T/0875X004 7/8” 7.6 5.6 4’ 

050K-S25T/1000X004 1” 9.8 7.2 5’ 

Base 

Length (ft) 

Item ID Wire Size Vertical WLL 

(tons) 

Eye & Eye Wire Rope Slings 

Domestic 




• High quality Domestic wire rope with 

flemish eye splices and mechanically 

swaged steel sleeves 



Choker WLL 

(tons) 

050D-S25/0250X002 1/4” 0.65” 0.48 2’ 

050D-S25/0312X002 5/16” 1 0.74 2’ 

050D-S25/0375X002 3/8” 1.4 1.1 2’ 

050D-S25/0437X002 7/16” 1.9 1.4 2’ 

050D-S25/0500X002 1/2” 2.5 1.9 2’ 

050D-S25/0625X003 5/8” 3.9 2.9 3’ 

050D-S25/0750X004 3/4” 5.6 4.1 4’ 

050D-S25/0875X004 7/8” 7.6 5.6 4’ 

050D-S25/1000X005 1” 9.8 7.2 5’ 

050D-S36/1125X005 1-1/8” 12 9.1 5’ 

050D-S36/1250X006 1-1/4” 15 11 6’ 

Base 

Length (ft) 

Item ID 

Wire 

Size 

Thimble & Thimble Wire Rope 

Slings Domestic 



fabrication teamHigh quality American 

wire rope with flemish eye splices and 

mechanically swaged steel sleeves 



Vertical WLL 

(tons) 

Choker WLL 

(tons) 

050D-S25T/0250X002 1/4” 0.65 0.48 2’ 

050D-S25T/0312X002 5/16” 1 0.74 2’ 

050D-S25T/0375X002 3/8” 1.4 1.1 2’ 

050D-S25T/0437X002 7/16” 1.9 1.4 2’ 

050D-S25T/0500X002 1/2” 2.5 1.9 2’ 

050D-S25T/0625X003 5/8” 3.9 2.9 3’ 

050D-S25T/0750X004 3/4” 5.6 4.1 4’ 

050D-S25T/0875X004 7/8” 7.6 5.6 4’ 

050D-S25T/1000X005 1” 9.8 7.2 5’ 

Base Length 

(ft) 

Phone: 800.952.7325 Fax: 845.338.1372 


14

90 60 

60 60 

45 45 45 

30 30 30 

Wire Rope Slings 

1/4” 4,300 7,400 6,100 4,300 11,200 9,100 6,400 

5/16” 5,700 9,900 8,100 5,700 14,800 12,100 8,500 

• Premium wire rope 

3/8” 8,800 15,200 12,400 8,800 22,900 18,700 13,200 

bridles made to exacting 

1/2” 15,000 26,000 21,200 15,000 39,000 31,800 22,500 

specifications by our 

5/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,900 


3/4” 35,300 61,100 49,900 35,300 91,700 74,900 53,000 

• High quality alloy hardware 

is attached to wire rope 

with Wire flemish Rope eye Bridle splices Slings and 

mechanically swaged steel 

sleeves 

2- Leg Bridle 3- Leg Bridle 4- Leg Bridle 

• Individually tagged with 

rated capacities Bridle per Slings OSHA 

specifications with 

• Available Import or 

Single Part Body 

Domestic 

Rope 

Dia. 

(in) 

Min 

Sling 

Length 

Eye 

Hook 

Cap. 

60 

45 

30 

Oblong 

Link 

Dia. 

60 

Oblong 

Link 

Dia. 

1/4” 1’ 3” 1.1 .91 .65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/2 

1/4” 1’3” 1 1.1 .91 0.65 1/2 1.7 1.4 .97 1/2 2.2 1.8 1.3 1/2 

5/16” 1’ 6” 1.7 1.4 1.0 1/2 2.6 2.1 1.5 1/2 3.5 2.8 2.0 3/4 

5/16” 3/8” 1’ 1’6” 8” 11 1/2 1.7 2.5 1.4 2.0 1.4 1 1/2 2.6 3.7 2.1 3.0 1.5 2.2 1/2 3/4 3.5 5.0 2.8 4.1 2.9 2 3/4 

7/16” 3/8” 1’ 1’8” 10” 12 1/2 2.5 3.4 2.0 2.7 1.4 1.9 1/2 3/4 3.7 5.0 3.0 4.1 2.2 2.9 3/4 6.7 5 4.1 5.5 2.9 3.9 3/4 1 

1/2” 2’ 3 4.4 3.6 2.5 3/4 6.6 5.4 3.8 1 8.8 7.1 5.1 9/16” 

7/16” 1’10” 

2’ 2” 4 1/2 2 3.4 

5.5 

2.7 

4.5 

1.9 

3.2 

3/4 

3/4 8.3 

5 4.1 

6.8 

2.9 

4.8 

3/4 

1 

6.7 

11 

5.5 

9.0 

3.9 

6.4 1 

1 1/4 

1/2” 5/8” 2’ 2’ 4” 4 1/2 3 4.4 6.8 3.6 5.5 2.5 3.9 3/4 1 6.6 10 5.4 8.3 3.8 5.9 1 1/4 8.8 14 7.1 11 5.1 7.8 1 

1/2 

3/4” 2’ 9” 7 9.7 709 5.6 1 1/4 15 12 8.4 1/2 19 16 11 9/16” 2’2” 4 3/4 

7/8” 3’ 3” 11 5.5 4.5 3.2 3/4 8.3 6.8 4.8 1 11 9 6.4 1 

13 11 7.6 1 1/4 20 16 11 1 1/2 26 21 15 2 

5/8” 1 ” 3’ 2’4” 6” 411 1/2 6.8 17 5.5 14 3.9 9.8 1 1/2 10 26 8.3 21 5.9 15 1 1/4 3/4 14 34 11 28 7.8 20 12 1/2 1/4 

1 1/8 ” 4’ 15 21 17 12 1/2 31 26 18 3/4 42 34 24 2 

3/4” 2’9” 7 9.7 7.9 5.6 1 1/4 15 12 8.4 1 1/2 19 16 11 1 3/4 

3/4 

1 1/4 ” 4’ 6” 15 26 21 15 3/4 38 31 22 2 51 42 30 2 3/4 

7/8” 1 3/8 ” 3’3” 5’ 22 11 13 31 11 25 7.6 18 1 1/4 3/4 20 46 16 38 11 27 12 1/2 1/4 26 - 21 - 15 - 2- 

11” 1/2 ” 5’ 3’6” 22 11 17 37 14 30 9.8 21 1 1/2 2 26 55 21 45 15 32 12 3/4 1/4 24 - 28 - 20 - 2 1/4 - 

1 3/4 ” 6’ 6” 30 49 40 28 2 1/4 - - - - - - - - 

1 1/8 2” 

” 

8’ 

4’ 

37 

15 21 

63 

17 

52 

12 

37 

1 

2 3/4 31 

- 

26 

- 

18 

- 

1 3/4 - 

42 

- 

34 

- 

24 

- 

2 3/4 

- 

1 1/4 ” 4’6” 15 26 21 15 1 3/4 38 31 22 2 51 42 30 2 3/4 

Wire 1 3/8 Rope ” Slings 5’ 22 31 25 18 1 3/4 46 38 27 2 1/4 — — — — 

1 1/2 Rope ” 5’6” 22 37 30 21 2 Vertical 55 45 32 2 1/4 Standard — — — — 

Vertical 

Choker 

Min Sling Length 

Thimbled Eye Size 

1 3/4 Dia.(in) 

” 6’6” 30 49 40 28 2 1/4 Basket 

— — — — 

Eye 

— 

Size 

— — — 

1/4” .65 .48 1.3 1’6” 2 x 4 7/8 x 1 5/8 

2” 5/16” 8’ 37 1.0 63 52 .74 37 2 3/4 2.0 — — 1’9” — — 2 1/2 — x 5 — 1— 1/16 x 1 1/8 — 

3/8” 1.4 1.1 2.9 2’0” 3 x 6 1 1/8 x 2 1/8 

Note: Length 7/16” Tolerances: Single 1.9 Part Wire Rope 1.4 Slings - Standard length 3.9 tolerance is plus 2’3” or minus two rope 3 diameters, 1/2 x 7 or plus 1or minus 

1/4 x 2 1/4 

0.5% of the 1/2” sling length, whichever 2.5 us greater. The 1.9 legs of bridle slings, 5.1 or matched slings 2’6” are normally held to 4 x within 8 one rope diameter 

1 1/2 x 2 3/4 

9/16” 3.2 2.4 6.4 2’9” 4 1/2 x 9 1 1/2 x 2 3/4 

5/8” 3.9 2.9 7.8 3’0” 5 x 10 1 3/4 x 3 1/4 

3/4” 5.6 4.1 11 3’6” 6 x 12 2 x 3 3/4 

7/8” 7.6 Do not exceed rated 5.6 capacities. Sling 15capacity decreases 4’0” as the angle from 7 horizontal x 14 decreases. 2 1/2 x 4 1/4 

1 ” 9.8 Slings should not 7.2be used at angles 20 of less than 30° 4’6” 8 x 16 2 1/2 x 4 1/2 

1 1/8 ” 12 9.1 24 5’0” 9 x 18 2 7/8 x 5 1/8 

1 1/4 ” 15 11 30 5’6” 10 x 20 3 1/2 x 6 1/2 

1 3/8 ” 18 13 36 6’0” 11 x 22 3 1/2 x 6 1/4 

1 1/2 ” 21 16 42 7’0” 12 x 24 3 1/2 x 6 1/4 

1 3/4 ” 28 21 57 8’0” 14 x 28 4 1/2 x 9 

Using slings at an angle can become deadly if that angle is not taken into consideration when selecting 

2” 37 28 73 9’0” 16 x 32 6 x 12 

2 1/4 ” 44 the sling to be used. 35 The tension on 89 each leg of the sling 10’0” is increased as the 18 angle x 36 of lift, from horizontal, 

7 x 14 

2 1/2 ” 54 decreases. It is most 42 desirable for a 109 sling to have a larger 11’0” angle of lift, approaching 20 x 40 90°. Lifts with -angles of 

less than 30° from horizontal are not recommended. If you can measure the angle of lift or the length and 

height of the sling as rigged, you can determine the properly rated sling for your lift. 

6X19 EIP, 6 X IWRC 19 EIP, IWRC 

6X37 EIP, IWRC 

6X37 EIP, IWRC 

2-Leg Bridle 3-Leg Bridle 4-Leg Bridle 

45 

Important Consideration - Before buying or using a sling, know as much as possible about the lift you will 

make to minimize the potential danger to personnel, product and property 

30 

60 

45 

30 

Oblong 

Link 

Dia. 



Chain Slings 

Single 

Double 

Type SOO Type SOS Type SOG Type SOF Type SSS Type SGG Type SSG 

Triple/Quad 

Type DOS Type DOG Type DOF 

Type TOS Type TOG Type QOS Type QOG 

Grade 100 Alloy Chain Sling Sling Working Working Load Load Limit Limits Specs (lbs) (lbs) 

Size Single Leg Double Leg / Single Basket Triple and Quad Leg / Double Basket 

90 60 

60 60 

45 45 45 

30 30 30 

1/4” 

1/4” 

4300 

4,300 7,400 

7400 

6,100 

6100 

4,300 

4300 

11,200 

11,200 

9,100 

9,100 6,400 

6,400 

5/16” 5,700 9,900 8,100 5,700 14,800 12,100 8,500 

5/16” 3/8” 8,800 5700 15,200 9900 12,400 8100 8,800 5700 22,900 14,800 18,700 12,100 13,200 8,500 

3/8” 1/2” 15,000 8800 15,200 26,000 21,200 12,400 15,000 8800 39,000 22,900 31,800 18,700 13,200 22,500 

5/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,900 

1/2” 

3/4” 

15,000 

35,300 61,100 

26,00 

49,900 

21,200 

35,300 

15,000 

91,700 

39,000 

74,900 

31,800 22,500 

53,000 

5/8” 22,600 39,100 32,000 22,600 58,700 47,900 33,900 

Wire 3/4” Rope 35,300 Bridle Slings61,100 49,900 35,300 91,700 74,900 53,000 

2- Leg Bridle 3- Leg Bridle 4- Leg Bridle 

Bridle Slings 

with 

Phone: 800.952.7325 Fax: 845.338.1372 


16

Synthetic Web Slings 

Liftex® Flat Synthetic Pro-Edge® 

Web Slings HD 

• Made with flat loop eye on each end 

• Can be used with vertical, basket & choker hitch 

types 

• Pro-Edge® structural edge reinforcement and 

abrasion resistance provides maximum sling 

service life 

Liftex Roundslings 

• Sling life is extended through rotation of bearing 

points 

• Tighter choker with easier release 

• Reduce rigging weight and risk of injury 

Also available in Twisted Eye. Recommended when using slings in Choker Hitch 

Item ID Width Ply Vertical WLL (lbs) Choker WLL (lbs) 

319-EE1-901XXX 1” 1 1600 1280 

319-EE2-901XXX 1” 2 3100 2480 

319-EE4-901XXX 1” 4 6200 4960 

319-EE1-902XXX 2” 1 3100 2480 

319-EE2-902XXX 2” 2 6200 4960 

319-EE4-902XXX 2” 4 12,400 9920 

319-EE1-903XXX 3” 1 4,650 3720 

319-EE2-903XXX 3” 2 9,300 7440 

319-EE4-903XXX 3” 4 18,600 14,880 

319-EE1-904XXX 4” 1 6,200 4,960 

319-EE2-904XXX 4” 2 11,000 8800 

319-EE4-904XXX 4” 4 22,000 17,600 

Item ID Color Vertical WLL (lbs) Choker WLL (lbs) 

319-ENR01XXX Purple 2600 2100 

319-ENR03XXX Yellow 8400 6700 

319-ENR02XXX Green 5300 4200 

319-ENR04XXX Tan 10,600 8500 

319-ENR05XXX Red 13,200 10,600 

319-ENR10XXX Orange 25,000 20,000 

319-ENR11XXX Orange 53,000 42,400 

319-ENR12XXX Orange 66,000 52,800 

319-ENR13XXX Orange 90,000 72,000 

Synthetic slings are not be shortened at all, if a 

shorter sling is needed for a job use a different 

sling that is properly suited for the application. 

Liftex® Endless Synthetic 

Pro-Edge® Web Slings HD 

• Continuous loop formed by joining ends of 

webbing together with a load-bearing splice 

• Design allows for rotation of bearing points 

• Can be used with vertical, basket & choker hitch 

types 

• Pro-Edge® structural edge reinforcement and 

abrasion resistance provides maximum sling 

service life 

Capacities for lifting slings are based 

on a Design Factor or 5:1. 

Instructions for Use: Roundslings 

Item ID Width Ply Vertical WLL (lbs) Choker WLL (lbs) 

319-EN1-901XXX 1” 1 2,200 1,760 

319-EN2-901XXX 1” 2 6,200 4,960 

319-EN3-901XXX 1” 3 9,300 7,440 

319-EN1-902XXX 2” 1 6,200 4,960 

319-EN2-902XXX 2” 2 12,400 9,920 

319-EN3-902XXX 2” 3 18,600 14,880 



Wear Pads 

Liftex® Quick-Sleeves Web 

Wear Pads Heavy Polyester 

• Abrasion resistant heavy poly protects slings 

• Hook and loop closure for quick install and 

removal 

Liftex® Quick-Sleeves Roundsling 

Wear Pads Heavy Polyester 

• Abrasion resistant heavy poly protects slings 


removal 

Item ID Sleeve Width Fits Width 

319-QSF02XXX-HP 4” 1” & 2” 

319-QSF04XXX-HP 6” 3” & 4” 

319-QSF06XXX-HP 8” 6” 

Liftex® Quick-Sleeves Web 

Wear Pads Cordura 

• Abrasion resistant cordura protects slings 


removal 


319-QSR02XXX-HP 6” 6” 

319-QSR05XXX-HP 8” 8” 

319-QSR07XXX-HP 10” 10” 

319-QSR09XXX-HP 12” 12” 

319-QSR11XXX-HP 14” 14” 

319-QSR13XXX-HP 16” 16” 

Liftex® Quick-Sleeves Roundsling 

Wear Pads Cordura 

• Abrasion resistant cordura protects slings 


removal 


319-QSF02XXX-C 4” 1” & 2” 

319-QSF04XXX-C 6” 3” & 4” 

319-QSF06XXX-C 8” 6” 


319-QSR02XXX-C 6” 6” 

319-QSR05XXX-C 8” 8” 

319-QSR07XXX-C 10” 10” 

319-QSR09XXX-C 12” 12” 

319-QSR11XXX-C 14” 14” 

319-QSR13XXX-C 16” 16” 

We offer a variety of specialty webbing 

products to suite your special application. 

If you do not see what you are looking for please 

contact customer service to help determine the sling 

to suite your CUSTOM SIZE and application needs. 

• Custom widths and lengths can be produced to fit your specific requirement 

• Custom Bridle/Multi-Leg slings are available with sling hooks 

• Web slings can be fitting with triangle and choker fittings 

• Specialty eye treatments are available to reduce the wear in the eye area thereby 

extending sling life. 

• Wear resistant webbing is available for abrasive, environmentally or chemically harsh 

environments and applications. 

• RFID chips are optional on Pro-Edge slings 

EMAIL US! 

cs@peaktrading.com 

Phone: 800.952.7325 Fax: 845.338.1372 


18

Chain 

G30 Proof Coil Chain SC 

• Made From Low Carbon Steel 

• Self Colored (SC) finish 

• Do not use for overhead lifting 


120-G30/0187-XXXX 3/16” 750 250’,750’1500’ 

120-G30/0250-XXXX 1/4” 1250 133’,400’800’ 

120-G30/0312-XXXX 5/16” 1900 92’,275’,550’ 

120-G30/0375-XXXX 3/8” 2650 66’,200’,400’ 

120-G30/0500-XXXX 1/2” 4,500 33’,100’,200’, 200’ 

120-G30/0625-XXXX 5/8” 6,900 75’,150’ 

120-G30/0750-XXXX 3/4” 10,600 100’ 

G30 Proof Coil Chain EG 

• Made From Low Carbon Steel 

• Electoplated finish 



121-G30/0187-XXXX 3/16” 750 250’,750’1500’ 

121-G30/0250-XXXX 1/4” 1250 133’,400’800’ 

121-G30/0312-XXXX 5/16” 1900 92’,275’,550’ 

121-G30/0375-XXXX 3/8” 2650 66’,200’,400’ 

121-G30/0500-XXXX 1/2” 4500 33’,100’,200’ 

121-G30/0625-XXXX 5/8” 6900 75’,150’ 

G30 Proof Coil Chain HG 

• Imported, hot-dip galvanized and made from 

low carbon steel 

• Excellent general-purpose chain of standard 

commercial quality 

• G30 Proof Coil Chain is frequently used for 

fabricating towing chains, binding chains, tie 

down chains and logging chains 



122-G30/0187-XXXX 3/16” 750 250’,750’1500’ 

122-G30/0250-XXXX 1/4” 1250 133’,400’800’ 

122-G30/0312-XXXX 5/16” 1900 92’,275’,550’ 

122-G30/0375-XXXX 3/8” 2650 66’,200’,400’ 

122-G30/0500-XXXX 1/2” 4500 33’,100’,200’ 

122-G30/0625-XXXX 5/8” 6900 75’,150’ 

122-G30/0750-XXXX 3/4” 10,600 100’ 

G30 Proof Coil Chain SS 

• Type 316 stainless steel 

• Offers superior strength and rust resistance 


Item ID Size WLL (lbs) Available Put Ups 

124-G30/316/0125-XXXX 1/8” 375 per ft, 1000’, 2000’, 2000’ 

124-G30/316/0187-XXXX 3/16” 1200 per ft, 500’, 750’, 1500’ 

124-G30/316/0250-XXXX 1/4” 2000 per ft, 400’, 800’ 

124-G30/316/0312-XXXX 5/16” 2850 per ft, 275’, 550’’ 

124-G30/316/0375-XXXX 3/8” 3550 per ft, 200’, 400’ 

124-G30/316/0500-XXXX 1/2” 6500 per ft, 100’, 200’ 

G70 Transport Chain YC 

• Imported Transport Chain with a yellow 

chromate finish 

• Made from heat treated carbon steel 


Item ID Size WLL (lbs) Available Put Ups 

123-G70/0250-XXXX 1/4” 3150 133’, 400’, 800’ 

123-G70/0312-XXXX 5/16” 4700 92’, 275’, 550’ 

123-G70/0375-XXXX 3/8” 6600 66’, 200’, 400’ 

123-G70/0625-XXXX 1/2” 11,300 33’, 100’, 200’ 

123-G70/0625-XXXX 5/8” 15,800 75’, 150’ 

Crosby® G100 Lifting Chain 

Alloy 

• Alloy Steel 

• Heat Treated 

• Finish – Black rust preventative coating 

• Proof Tested at 2 times the Working 

Load Limit with certification 

Item ID Size WLL (lbs) Put Up (ft) Weight 

307-272710-000 1/4” 4300 Per ft 0.73 lbs 

307-273710 1/4” 4300 500 376.00 lbs 

307-273729-000 5/16” 5700 Per ft 1.03 lbs 

307-273729 5/16” 5700 500 565.00 lbs 

307-273738-000 3/8” 8800 Per ft 1.40 lbs 

307-273738 3/8” 8800 500 740.00 lbs 

307-273747-000 1/2” 15,000 Per ft 2.60 lbs 

307-273747 1/2” 15,000 300 747.00 lbs 

307-273756-000 5/8” 22,600 Per ft 3.38 lbs 

307-273756 5/8” 22,600 200 757.00 lbs 

307-273858 3/4” 35,300 100 584.00 lbs 

307-273876 1” 59,700 75 1010.00 lbs 

Double Loop Chain EG 

• Ideal for playground and gymnasium 

equipment, farm and animal chain 

• Low Carbon Steel 

• Electro Galvanized Finish 

Item ID Size MBS (lbs) Put Up (ft) Weight 

126-DL03-0100 #3 90 100’ 5.75 lbs 

126-DL2/0-0250 2/0 255 250’ 44.00 lbs 

Single Jack Chain EG 

• Ideal for fixture and novelty suspension, 

and/or general utility 

• Low Carbon Steel 

• Electro Galvanized, SC Finish 

Item ID Size MBS (lbs) Put Up (ft) Weight 

126-SJ06-0100 #6 95 100’ 35.00 lbs 

126-SJ08-0250 #8 60 250’ 52.00 lbs 

126-SJ10-0250 #10 47 250’ 38.00 lbs 

126-SJ12-0250 #12 29 250’ 24.00 lbs 



Turnbuckles 

Hook & Hook Turnbuckles 

• Drop forged 

• Hot dip galvanized 

Eye & Eye Turnbuckles 



Item ID Size Take-up Closed OAL WLL (lbs) Weight 

(in) 

115-TBHH0250X04 1/4” 4” 8.25” 400 0.30 lbs 

115-TBHH0312X04.5 5/16” 4-1/2” 9.56” 700 0.53 lbs 

115-TBHH0375X06 3/8” 6” 11.88” 1000 0.75 lbs 

115-TBHH0500X06 1/2” 6” 13.30” 1500 1.50 lbs 

115-TBHH0500X09 1/2” 9” 16.30” 1500 1.80 lbs 

115-TBHH0500X12 1/2” 12” 19.30” 1500 2.19 lbs 

115-TBHH0625X06 5/8” 6” 15.50” 2250 2.75 lbs 

115-TBHH0625X09 5/8” 9” 18.50” 2250 3.00 lbs 

115-TBHH0625X12 5/8” 12” 21.50” 2250 3.50 lbs 

115-TBHH0750X06 3/4” 6” 17.00” 3000 3.75 lbs 

115-TBHH0750X09 3/4” 9” 20.00” 3000 4.50 lbs 

115-TBHH0750X12 3/4” 12” 23.00” 3000 5.75 lbs 

115-TBHH0750X18 3/4” 18” 29.00” 3000 7.00 lbs 

115-TBHH0875X12 7/8” 12” 24.63” 4000 9.35 lbs 

115-TBHH0875X18 7/8” 18” 30.63” 4000 10.25 lbs 

115-TBHH1000X06 1” 6” 20.63” 5000 11.10 lbs 

115-TBHH1000X12 1” 12” 26.63” 5000 12.00 lbs 

Eye & Hook Turnbuckles 



Item ID Size Take-up Closed OAL (in) WLL (lbs) Weight 

115-TBEH0250X04 1/4” 4” 8.25” 400 0.30 lbs 

115-TBEH0312X04.5 5/16” 4-1/2” 9.56” 700 0.53 lbs 

115-TBEH0375X06 3/8” 6” 11.88” 1000 0.75 lbs 

115-TBEH0500X06 1/2” 6” 13.30” 1500 1.60 lbs 

115-TBEH0500X09 1/2” 9” 16.30” 1500 1.82 lbs 

115-TBEH0500X12 1/2” 12” 19.30” 1500 2.18 lbs 

115-TBEH0625X06 5/8” 6” 15.50” 2250 2.71 lbs 

115-TBEH0625X09 5/8” 9” 18.50” 2250 2.84 lbs 

115-TBEH0625X12 5/8” 12” 21.50” 2250 3.67 lbs 

115-TBEH0750X06 3/4” 6” 17.00” 3000 3.75 lbs 

115-TBEH0750X09 3/4” 9” 20.00” 3000 4.50 lbs 

115-TBEH0750X12 3/4” 12” 23.00” 3000 5.75 lbs 

115-TBEH0750X18 3/4” 18” 29.00” 3000 7.25 lbs 

115-TBEH0875X12 7/8” 12” 24.63” 3000 8.38 lbs 

115-TBEH0875X18 7/8” 18” 30.63” 4000 10.25 lbs 

115-TBEH1000X06 1” 6” 20.63” 4000 11.10 lbs 

115-TBEH1000X12 1” 12” 26.63” 5000 12.00 lbs 


(in) 

115-TBEE0250X04 1/4” 4” 8.25” 500 0.30 lbs 

115-TBEE0312X04.50 5/16” 4-1/2” 9.56” 800 0.50 lbs 

115-TBEE0375X06 3/8” 6” 11.88” 1200 0.75 lbs 

115-TBEE0500X06 1/2” 6” 13.31” 2200 1.46 lbs 

115-TBEE0500X09 1/2” 9” 16.31” 2200 1.75 lbs 

115-TBEE0500X12 1/2” 12” 19.31” 2200 2.19 lbs 

115-TBEE0625X06 5/8” 6” 15.50” 3500 2.63 lbs 

115-TBEE0625X09 5/8” 9” 18.50” 3500 3.00 lbs 

115-TBEE0625X12 5/8” 12” 21.50” 3500 3.50 lbs 

115-TBEE0750X06 3/4” 6” 17.00” 5200 4.25 lbs 

115-TBEE0750X09 3/4” 9” 20.00” 5200 5.00 lbs 

115-TBEE0750X12 3/4” 12” 23.00” 5200 5.46 lbs 

115-TBEE0750X18 3/4” 18” 29.00” 5200 7.25 lbs 

115-TBEE0875X12 7/8” 12” 24.63” 7200 8.88 lbs 

115-TBEE0875X18 7/8” 18” 30.63” 7200 10.25 lbs 

115-TBEE1000X06 1” 6” 20.63” 10,000 11.10 lbs 

115-TBEE1000X12 1” 12” 26.63” 10,000 11.25 lbs 

115-TBEE1000X18 1” 18” 32.63” 15,200 14.00 lbs 

115-TBEE1000X24 1” 24” 38.63” 15,200 17.00 lbs 

115-TBEE1250X12 1-1/4” 12” 29.88” 15,200 21.20 lbs 

115-TBEE1250X18 1-1/4” 18” 35.88” 15,200 24.10 lbs 

115-TBEE1250X24 1-1/4” 24” 41.88” 15,200 25.00 lbs 

115-TBEE1500X12 1-1/2” 12” 30.50” 21,400 27.00 lbs 

115-TBEE1500X18 1-1/2” 18” 36.50” 21,400 31.00 lbs 

115-TBEE1500X24 1-1/2” 24” 42.50” 21,400 38.00 lbs 

115-TBEE2000X24 2” 24” 51.70” 37,000 88.00 lbs 

Stub & Stub Turnbuckles 



• Stub End Turnbuckles are not rated 


(in) 

115-TBSS0375X06 3/8” 6” 16.00” 1,200 0.75 lbs 

115-TBSS0500X06 1/2” 6” 16.00” 2,200 1.25 lbs 

115-TBSS0625X06 5/8” 6” 16.00” 3,500 2.11 lbs 

115-TBSS0750X06 3/4” 6” 17.00” 5,200 3.27 lbs 

115-TBSS0875X06 7/8” 6” 18.00” 7,200 4.78 lbs 

115-TBSS1000X06 1” 6” 19.00” 10,000 6.36 lbs 

115-TBSS1500X06 1-1/2” 6” 20.50” 21,000 15.00 lbs 

Phone: 800.952.7325 Fax: 845.338.1372 


20

Turnbuckles 

Eye & Jaw Turnbuckles 



Jaw & Jaw Turnbuckles 




(in) 

115-TBEJ0250X04 1/4” 4” 8.29” 500 0.32 lbs 

115-TBEJ0312X04.5 5/16” 4-1/2” 9.78” 800 0.47 lbs 

115-TBEJ0375X06 3/8” 6” 11.88” 1200 0.76 lbs 

115-TBEJ0500X06 1/2” 6” 13.31” 2200 1.50 lbs 

115-TBEJ0500X09 1/2” 9” 16.31” 2200 1.75 lbs 

115-TBEJ0500X12 1/2” 12” 19.25” 2200 2.20 lbs 

115-TBEJ0625X06 5/8” 6” 15.50” 3500 2.65 lbs 

115-TBEJ0625X09 5/8” 9” 18.50” 3500 3.00 lbs 

115-TBEJ0625X12 5/8” 12” 21.50” 3500 3.78 lbs 

115-TBEJ0750X06 3/4” 6” 17.00” 5200 4.50 lbs 

115-TBEJ0750X09 3/4” 9” 20.00” 5200 5.00 lbs 

115-TBEJ0750X12 3/4” 12” 21.50” 5200 5.76 lbs 

115-TBEJ0750X18 3/4” 18” 27.19” 5200 7.50 lbs 

115-TBEJ0875X12 7/8” 12” 22.34” 7200 9.00 lbs 

115-TBEJ1000X18 1” 18” 30.34” 10,000 0.00 lbs 

115-TBEJ1000X24 1” 24” 36.34” 10,000 16.80 lbs 

115-TBEJ0875X18 7/8” 18” 28.34” 7200 10.25 lbs 

115-TBEJ1000X06 1” 6” 18.34” 10,000 11.10 lbs 

115-TBEJ1000X12 1” 12” 24.34” 10,000 12.00 lbs 

115-TBEJ1250X12 1-1/4” 12” 26.82” 15,200 21.20 lbs 

115-TBEJ1500X12 1-1/2” 12” 28.50” 21,400 27.00 lbs 

115-TBEJ1250X18 1-1/4” 18” 32.82” 15,200 24.20 lbs 

115-TBEJ1250X24 1-1/4” 24” 38.82” 15,200 28.00 lbs 

115-TBEJ1500X18 1-1/2” 18” 34.50” 21,400 35.00 lbs 

115-TBEJ1500X24 1-1/2” 24” 40.50” 21,400 44.00 lbs 

Item ID Size Takeup 

Closed OAL 

(in) 

WLL (lbs) 

Weight 

115-TBJJ0250X04 1/4” 4” 8.29” 500 0.39 lbs 

115-TBJJ0312X04.5 5/16” 4-1/2” 9.78” 800 0.54 lbs 

115-TBJJ0375X06 3/8” 6” 11.88” 1200 0.81 lbs 

115-TBJJ0500X06 1/2” 6” 13.31” 2200 1.57 lbs 

115-TBJJ0500X09 1/2” 9” 16.31” 2200 1.95 lbs 

115-TBJJ0500X12 1/2” 12” 19.31” 2200 2.18 lbs 

115-TBJJ0625X06 5/8” 6” 15.50” 3500 2.90 lbs 

115-TBJJ0625X09 5/8” 9” 18.50” 3500 3.35 lbs 

115-TBJJ0625X12 5/8” 12” 21.50” 3500 4.00 lbs 

115-TBJJ0750X06 3/4” 6” 17.00” 5200 4.30 lbs 

115-TBJJ0750X09 3/4” 9” 20.00” 5200 4.50 lbs 

115-TBJJ0750X12 3/4” 12” 23.00” 5200 5.88 lbs 

115-TBJJ0750X18 3/4” 18” 29.00” 5200 7.53 lbs 

115-TBJJ0875X12 7/8” 12” 24.63” 7200 8.63 lbs 

115-TBJJ0875X18 7/8” 18” 30.63” 7200 10.25 lbs 

115-TBJJ1000X06 1” 6” 20.63” 10,000 9.44 lbs 

115-TBJJ1000X12 1” 12” 26.63” 10,000 11.65 lbs 

115-TBJJ1000X18 1” 18” 32.63” 10,000 16.10 lbs 

115-TBJJ1000X24 1” 24” 34.72” 10,000 17.00 lbs 

115-TBJJ1250X12 1-1/4” 12” 25.34” 15,200 19.00 lbs 

115-TBJJ1250X18 1-1/4” 18” 31.34” 15,200 26.35 lbs 

115-TBJJ1250X24 1-1/4” 24” 37.34” 15,200 31.00 lbs 

115-TBJJ1500X12 1-1/2” 12” 26.50” 21,400 27.00 lbs 

115-TBJJ1500X18 1-1/2” 18” 32.50” 21,400 31.20 lbs 

115-TBJJ1500X24 1-1/2” 24” 38.50” 21,400 38.20 lbs 

115-TBJJ2000X24 2” 24” 50.75” 37,000 198.00 lbs 

Turnbuckles 

HOOK & HOOK EYE & HOOK EYE & EYE 

EYE & JAW JAW & JAW STUB & STUB 



Shackles 

Screw Pin Anchor Shackles 

• Forged with alloy pins 

• Meets the performance requirements of 

Federal Specification RR-C-271D Type 

IVA, Grade A, Class 1, except for those 


• Working load limit permanently shown on 

every shackle 

Bolt Type Anchor Shackles 

• Bolt Type Anchor Shackle with thin head 

bolt - nut with cotter pin 



Federal Specification RR-C-271D Type 

IVA, Grade A, Class 3, except for those 



every shackle. Hot dip galvanized 

Item ID Size WLL (tons) Weight 

115-SHACKSPA0187 3/16” 0.5 0.06 lbs 

115-SHACKSPA0250 1/4” 0.5 0.10 lbs 

115-SHACKSPA0312 5/16” 0.75 0.19 lbs 

115-SHACKSPA0375 3/8” 1 0.31 lbs 

115-SHACKSPA0437 7/16” 1.5 0.38 lbs 

115-SHACKSPA0500 1/2” 2 0.72 lbs 

115-SHACKSPA0625 5/8” 3.25 1.37 lbs 

115-SHACKSPA0750 3/4” 4.75 2.35 lbs 

115-SHACKSPA0875 7/8” 6.5 3.50 lbs 

115-SHACKSPA1000 1” 8.5 5.03 lbs 

115-SHACKSPA1125 1-1/8” 9.5 7.00 lbs 

115-SHACKSPA1250 1-1/4” 12 9.50 lbs 

115-SHACKSPA1375 1-3/8” 13.5 13.53 lbs 

115-SHACKSPA1500 1-1/2” 17 17.20 lbs 

115-SHACKSPA1750 1-3/4” 25 27.78 lbs 

115-SHACKSPA2000 2” 35 45.00 lbs 

115-SHACKSPA2500 2-1/2” 55 86.00 lbs 

Round Pin Anchor Shackles 


• Meets the performance requirements of Federal 

Specification RR-C-271D Type IVA, Grade A, Class 

1, except for those provisions required of the 

contractor 

• Working load limit permanently shown on every 

shackle 


115-SHACKBTA0250 1/4” 0.5 0.17 lbs 

115-SHACKBTA0312 5/16” 0.75 0.22 lbs 

115-SHACKBTA0375 3/8” 1 0.40 lbs 

115-SHACKBTA0437 7/16” 1.5 0.48 lbs 

115-SHACKBTA0500 1/2” 2 0.79 lbs 

115-SHACKBTA0625 5/8” 3.25 1.54 lbs 

115-SHACKBTA0750 3/4” 4.75 2.53 lbs 

115-SHACKBTA0875 7/8” 6.5 3.95 lbs 

115-SHACKBTA1000 1” 8.5 5.95 lbs 

115-SHACKBTA1125 1-1/8” 9.5 7.00 lbs 

T304 SS Screw Pin Anchor 

Shackles 

• Type 304 Stainless Steel Screw Pin 

Anchor Shackle meets the performance 

requirements of Federal Specification RR-C- 

271D, Type IVA, Class 2 



Federal Specification RR-C-271D Type IVA, 

Grade A, Class 3, except for those provisions 

required of the contractor 


every shackle. Hot dip galvanized 



115-SHACKRPA0187 3/16” 0.33 0.15 lbs 

115-SHACKRPA0250 1/4” 0.5 0.15 lbs 

115-SHACKRPA0312 5/16” 0.75 0.20 lbs 

115-SHACKRPA0375 3/8” 1 0.29 lbs 

115-SHACKRPA0437 7/16” 1.5 0.38 lbs 

115-SHACKRPA0500 1/2” 2 0.75 lbs 

115-SHACKRPA0625 5/8” 3.25 0.00 lbs 

115-SHACKRPA0750 3/4” 4.75 2.00 lbs 

115-SHACKRPA0875 7/8” 6.5 0.00 lbs 

115-SHACKRPA1000 1” 8.5 5.32 lbs 

115-SHACKRPA1125 1-1/8” 9.5 7.00 lbs 

Item ID Size WLL (tons Weight 

116-304-SHACKSPA0187 3/16” 0.33 0.04 lbs 

116-304-SHACKSPA0250 1/4” .5 0.12 lbs 

116-304-SHACKSPA0312 5/16” .75 0.18 lbs 

116-304-SHACKSPA0375 3/8” 1 0.31 lbs 

116-304-SHACKSPA0437 7/16” 1.5 0.44 lbs 

116-304-SHACKSPA0500 1/2” 2 0.70 lbs 

116-304-SHACKSPA0625 5/8” 3.25 1.00 lbs 

116-304-SHACKSPA0750 3/4” 4.75 1.67 lbs 

116-304-SHACKSPA0875 7/8” 6.5 2.53 lbs 

116-304-SHACKSPA1000 1” 8.5 5.50 lbs 

116-304-SHACKSPA1125 1-1/8” 9.5 6.00 lbs 

Phone: 800.952.7325 Fax: 845.338.1372 


22

Eye Hoist / Grab Hooks 

Eye Hoist Hooks Carbon 

• Our Carbon Eye Hoist Hooks are quenched and 

tempered to give maximum strength 

Clevis Grab Hooks G43 

• Hot forged, heat treated and tempered 

• Designed for use with welded chain 

• Not recommended for overhead lifting sling 

applications 

Item ID WLL (tons) Weight 

115-HKEHC0.75TL 0.75 0.62 lbs 

115-HKEHC01TL 1 0.82 lbs 

115-HKEHC01.5TL 1.5 1.45 lbs 




115-HKEHC07.5TL 7.5 15.12 lbs 

115-HKEHC10TL 10 21.60 lbs 

115-HKEHC15TL 15 39.50 lbs 

Item ID Size Type WLL (lbs) Weight 

115-HKCG43/250EG 1/4” Zinc Plated 2600 0.34 lbs 

115-HKCG43/250SC 1/4” Self-colored 2600 0.34 lbs 







Eye Hoist Hooks Alloy 

• Our Alloy Eye Hoist Hooks are quenched 

and tempered to give maximum strength 

Clevis Grab Hooks G70 

• Hot forged, heat treated and tempered 

• Designed specifically for transport grade 70 chain 

• Note: Not recommended for overhead lifting sling 

applications 

Item ID WLL (tons) Weight 

115-HKEHA01TL 1 0.60 lbs 

115-HKEHA01.5TL 1.5 0.90 lbs 



115-HKEHA04.5TL 4.5 4.30 lbs 



115-HKEHA11TL 11 15.12 lbs 

115-HKEHA15TL 15 21.60 lbs 

Item ID Size WLL (lbs) Weight 

115-HKCG70/250YC 1/4” 3150 0.36 lbs 

115-HKCG70/312YC 5/16” 4700 0.62 lbs 

115-HKCG70/375YC 3/8” 6600 1.00 lbs 

115-HKCG70/500YC 1/2” 11,300 2.35 lbs 

We have monthly Sales & Promotions! 

EMAIL US 

at cs@peaktrading.com to get on our 

Email & Fax lists 



Clevis Slip Hooks / Pear Links 

Clevis Slip Hooks G43 

• Wide throat for shackles, 

chain tied loads 

• For use with Grade 30 proof 

coil or grade 40 high test 

chain 

• Not recommended for 

overhead lifting 

• ‘L’ - Latch type 

Pear Links Carbon Import SC 

• 100% Proof Tested 

• Carbon Steel 

• Quenched and Tempered 


115-HKCS43/250EG 1/4” 1950 0.58 lbs 

115-HKCS43/250EGL 1/4” 1950 0.58 lbs 

115-HKCS43/312EG 5/16” 2875 0.86 lbs 

115-HKCS43/312EGL 5/16” 2875 0.86 lbs 

115-HKCS43/375EG 3/8” 4000 1.21 lbs 

115-HKCS43/375EGL 3/8” 4000 1.21 lbs 

115-HKCS43/500EG 1/2” 6500 2.20 lbs 

115-HKCS43/500EGL 1/2” 6500 2.85 lbs 


115-PL0375 3/8” 1800 0.25 lbs 

115-PL0500 1/2” 2900 0.55 lbs 

115-PL0625 5/8” 4200 1.12 lbs 

115-PL0750 3/4” 6000 1.90 lbs 

115-PL0875 7/8” 8300 2.70 lbs 

115-PL1000 1” 10,800 4.60 lbs 

Clevis Slip Hooks G70 

• Wide throat for shackles, 

chain tied loads 

• For use with Grade 70 

Transport Chain 

• Not recommended for 

overhead lifting 

• ‘L’ - Latch type 

Master Links 

• 100% Proof Tested 

• Drop Forged Using Special Bar Quality 

Alloy Steel 

• Quenched and Tempered 


115-HKCS70/250YC 1/4” 3150 0.50 lbs 

115-HKCS70/250YCL 1/4” 3150 0.58 lbs 

115-HKCS70/312YC 5/16” 4700 0.91 lbs 

115-HKCS70/312YCL 5/16” 4700 0.91 lbs 

115-HKCS70/375YC 3/8” 6600 1.61 lbs 

115-HKCS70/375YCL 3/8” 6600 1.61 lbs 

115-HKCS70/500YC 1/2” 11,300 2.80 lbs 

115-HKCS70/500YCL 1/2” 11,300 3.00 lbs 


115-ML0500 1/2” 2900 0.84 lbs 

115-ML0625 5/8” 4200 1.52 lbs 

115-ML0750 3/4” 12,300 2.20 lbs 

115-ML1000 1” 20,300 5.00 lbs 

115-ML1250 1-1/4” 36,000 9.10 lbs 

115-ML1500 1-1/2” 54,300 16.25 lbs 

115-ML1750 1-3/4” 84,900 26.15 lbs 

115-ML2000 2” 102,600 38.05 lbs 




RIGGING HARDWARE 

Phone: 800.952.7325 Fax: 845.338.1372 


24

Connecting Links 

Eye Nuts 

• Made of high quality drop forged steel 

• Loads are based on a safety factor of 5 

to 1 Note: Loads shown apply to Eye Nuts 

only, based on a vertical pull, and not to any 

connecting bolt or stud 

Hammerlocks 

• Commercial grade 

Item ID Size Tap Size WLL (lbs) Weight 

115-EYENUT0250/312 1/4” 5/16” 850 0.10 lbs 

115-EYENUT0312/375 5/16” 3/8” 1250 0.16 lbs 

115-EYENUT0375/500 3/8” 1/2” 2250 0.28 lbs 

115-EYENUT0500/625 1/2” 5/8” 3600 0.60 lbs 

115-EYENUT0625/750 5/8” 3/4” 5200 1.00 lbs 

115-EYENUT0750/875 3/4” 7/8” 7200 1.70 lbs 

115-EYENUT0750/1000 3/4” 1” 7200 1.60 lbs 

115-EYENUT0875/1000 7/8” 1” 10,000 2.75 lbs 

115-EYENUT1000/1000 1” 1” 10,000 3.85 lbs 


115-GR80HL281 9/32” 3500 0.02 lbs 

115-GR80HL375 3/8” 7100 0.08 lbs 

115-GR80HL200 1/2” 12,000 0.17 lbs 

Cold Shuts 



• Electro Galvanized 


Item ID Size Material WLL (lbs) Weight 

115-CLINK187EG 3/16” Zinc Plated 800 0.03 lbs 







115-CSHUT187 3/16” Zinc Plated 750 0.02 lbs 





Oval Quick Links 

• Made from mild stee 

• Zinc Plated 

Lap Links 



115-LLINK125 1/8” Zinc Plated 120 0.20 lbs 







115-QL125 1/8” 220 0.02 lbs 

115-QL187 3/16” 400 0.05 lbs 

115-QL250 1/4” 880 0.07 lbs 

115-QL312 5/16” 1760 0.16 lbs 

115-QL375 3/8” 2200 0.29 lbs 

115-QL500 1/2” 2860 0.48 lbs 

115-QL562 9/16” 3300 0.77 lbs 

115-QL625 5/8” 4000 1.10 lbs 




Wide Jaw Quick Links 

• Made from mild steel 

• Zinc plated 

• Do not use for lifting 

#2450 Springhooks 




115-QLW125 1/8” 1102 0.04 lbs 

115-QLW187 3/16” 3086 0.06 lbs 

115-QLW250 1/4” 880 0.09 lbs 

115-QLW312 5/16” 1760 0.10 lbs 

115-QLW375 3/8” 1760 0.30 lbs 

SS Oval Quick Links 

• Made from Type 316 stainless steel 

• Do not use for lifting 

Item ID Size Finish WLL (lbs) Weight 

115-SPHK2450-187N 3/16” Zinc Plated 220 0.03 lbs 





#2451 Springhooks w Eyes 




116-316-QL125 1/8” 200 0.02 lbs 

116-316-QL187 3/16” 800 0.05 lbs 

116-316-QL250 1/4” 1200 0.07 lbs 

116-316-QL312 5/16” 2000 0.16 lbs 

116-316-QL375 3/8” 3500 0.29 lbs 

116-316-QL500 1/2” 5000 0.48 lbs 

116-316-QL562 9/16” 7700 0.77 lbs 

S Hooks ZP 

• S Hooks ZP are used in low-working 

load limit applications for attaching 

accessories to chain. 

Item ID Size Shank Length Finish Weight 

115-SHOOK062X01 1/16” 1” Zinc Plated 0.01 lbs 

115-SHOOK125X01 1/8” 1” Zinc Plated 0.01 lbs 

115-SHOOK156X01.75 5/32” 1-3/4” Zinc Plated 0.01 lbs 






115-SPHK2451-187E 3/16” Zinc Plated 220 0.03 lbs 




SS #2450 Springhooks 

• 316 Stainless Steel 



116-316-SPHK2450-187N 3/16” Stainless Steel 220 0.04 lbs 



SS #2451 Springhooks w 

Eyes 

• 316 Stainless Steel 

• Formed and commercial grade 

Item ID Size Finish WLL (tons) Weight 

116-316-SPHK2451-187E 3/16” Stainless Steel 220 0.04 lbs 



Phone: 800.952.7325 Fax: 845.338.1372 


26

Eyebolts 

Machinery Eye Bolts 

• Drop forged steel 

• Heat treated 

Forged Nut Eye Bolts 



• Machine threaded 

Item ID Size Shank Length WLL (lbs) Weight 

115-MEB0250X01 1/4” 1” 500 0.06 lbs 

115-MEB0312X01.125 5/16” 1-1/8” 900 0.06 lbs 

115-MEB0437X01.375 7/16” 1-3/8” 2000 0.21 lbs 

115-MEB0500X01.5 1/2” 1-1/2” 2600 0.38 lbs 

115-MEB0625X01.75 5/8” 1-3/4” 4000 0.75 lbs 

115-MEB0750X2.00 3/4” 2” 5000 0.88 lbs 

115-MEB0875X02.25 7/8” 2-1/4” 7000 1.35 lbs 

115-MEB1000X02.50 1” 2-1/2” 9000 2.35 lbs 

Machinery Shoulder Eye Bolts 



Item ID Size Shank Length WLL (lbs) Weight 

115-MEBSH0250X01 1/4” 1” 500 0.06 lbs 

115-MEBSH0312X01.125 5/16” 1-1/8” 900 0.10 lbs 

115-MEBSH0375X01.25 3/8” 1-1/4” 1600 0.16 lbs 

115-MEBSH0437X01.375 7/16” 1-3/8” 2000 0.21 lbs 

115-MEBSH0500X01.50 1/2” 1-1/2” 2400 0.30 lbs 

115-MEBSH0562X01.625 9/16” 1-5/8” 3000 0.49 lbs 

115-MEBSH0625X01.75 5/8” 1-3/4” 4000 0.74 lbs 

115-MEBSH0750X02 3/4” 2” 5000 1.00 lbs 

115-MEBSH0875X02.25 7/8” 2-1/4” 7000 1.73 lbs 

115-MEBSH1000X02.50 1” 2-1/2” 9000 2.35 lbs 

115-MEBSH1250X03.00 1-1/4” 3” 15,000 4.63 lbs 

Shoulder Eyebolt 

The threaded shank must protrude through the 

load sufficiently to allow full engagement 

of the nut. 

If the eyebolt protrudes so far through the load 

that the nut can’t be tightened securely against 

the load, use properly sized washers to take up the 

excess space between the nut and the load. 

Item ID Size Length WLL (lbs) Weight 

115-NEB0250X02 1/4” 2” 500 0.06 lbs 

115-NEB0250X04 1/4” 4” 500 0.12 lbs 

115-NEB0312X02.25 5/16” 2-1/4” 800 0.13 lbs 

115-NEB0312X04.25 5/16” 4-1/2” 800 0.25 lbs 

115-NEB0375X02.5 3/8” 2-1/2” 1200 0.24 lbs 

115-NEB0375X04.5 3/8” 4-1/2” 1200 0.31 lbs 

115-NEB0375X06 3/8” 6” 1200 0.43 lbs 

115-NEB0500X03.25 1/2” 3-1/4” 2200 0.50 lbs 

115-NEB0500X06 1/2” 6” 2200 0.62 lbs 

115-NEB0500X08 1/2” 8” 2200 0.75 lbs 

115-NEB0500X10 1/2” 10” 2200 0.88 lbs 

115-NEB0500X12 1/2” 12” 2200 1.00 lbs 

115-NEB0625X04 5/8” 4” 3500 0.95 lbs 

115-NEB0625X06 5/8” 6” 3500 1.17 lbs 

115-NEB0625X08 5/8” 8” 3500 1.29 lbs 

115-NEB0625X10 5/8” 10” 3500 1.43 lbs 

115-NEB0625X12 5/8” 12” 3500 1.66 lbs 

115-NEB0625X15 5/8” 15” 3500 1.98 lbs 

115-NEB0625X18 5/8” 18” 3500 2.19 lbs 

115-NEB0625X21 5/8” 21” 3500 2.49 lbs 

115-NEB0625X24 5/8” 24” 3500 2.82 lbs 

115-NEB0750X04.5 3/4” 4-1/2” 5200 1.68 lbs 

115-NEB0750X06 3/4” 6” 5200 1.80 lbs 

115-NEB0750X08 3/4” 8” 5200 2.00 lbs 

115-NEB0750X10 3/4” 10” 5200 2.38 lbs 

115-NEB0750X12 3/4” 12” 5200 2.52 lbs 

115-NEB0750X15 3/4” 15” 5200 2.75 lbs 

115-NEB0875X05 7/8” 5” 7200 2.50 lbs 

115-NEB0875X08 7/8” 8” 7200 2.96 lbs 

115-NEB1000X06 1” 6” 10,000 3.01 lbs 

115-NEB1000X09 1” 9” 10,000 3.83 lbs 

115-NEB1000X12 1” 12” 10,000 4.50 lbs 

115-NEB0875X06 7/8” 6” 7200 2.84 lbs 

115-NEB0875X12 7/8” 12” 7200 3.87 lbs 

Thickness of spacers must exceed this distance 

between the bottom of the load and the last thread 

of the eyebolt. 



Eyebolts / Wire Rope Blocks 

Forged Shoulder Eye Bolts 

• Drop Forged Steel 

• Galvanized Finish 

• Heat Treated 

• Machine Threaded and assembled with 

hex nuts tapped oversize 

Fixed Eye Single Wire Rope Block 

• Combination of bronze and steel bushings, designed 

for high load and medium speed applications 

• Oiled Bushings for permanent self-lubrication 


115-SHEB0250X02 1/4” 2” 500 0.07 lbs 

115-SHEB0250X04 1/4” 4” 500 0.08 lbs 

115-SHEB0312X02.25 5/16” 2-1/4” 800 0.13 lbs 

115-SHEB0312X04.25 5/16” 4-1/4” 800 0.17 lbs 

115-SHEB0375X02.5 3/8” 2-1/4” 1200 0.21 lbs 

115-SHEB0375X04.5 3/8” 4-1/4” 1200 0.32 lbs 

115-SHEB0375X06 3/8” 6” 1200 0.38 lbs 

115-SHEB0500X03.25 1/2” 3-1/4” 2200 0.38 lbs 

115-SHEB0500X06 1/2” 6” 2200 0.57 lbs 

115-SHEB0500X08 1/2” 8” 2200 0.63 lbs 

115-SHEB0625X04 5/8” 4” 3500 0.69 lbs 

115-SHEB0625X06 5/8” 6” 3500 1.00 lbs 

115-SHEB0750X04.5 3/4” 4-1/4” 5200 1.45 lbs 

115-SHEB0750X06 3/4” 6” 5200 2.00 lbs 

115-SHEB1000X06 1” 6” 10,000 3.75 lbs 

115-SHEB1000X09 1” 9” 10,000 4.29 lbs 

115-SHEB0500X10 1/2” 10” 2200 1.25 lbs 

115-SHEB0500X12 1/2” 12” 2200 1.50 lbs 

Item ID Max Cable Length (in) WLL (lbs) Style Weight 

300-01568 3/16” 525 0.50 lbs 

300-02068 3/16” 600 0.70 lbs 

300-02068-SN 3/16” 600 Snatch Block 0.70 lbs 

300-02568 1/4” 685 1.00 lbs 

300-03068 1/4” 800 1.40 lbs 


300-03568 5/16” 1550 3.10 lbs 


300-04068 3/8” 1700 3.50 lbs 


300-05068 3/8” 1850 5.10 lbs 

Fixed Eye Double Wire Rope Block 




Shoulder Lag Eye Screws HG 

• Use for connecting hand lines, spiders webs to trees and more 

on challenge courses 

• Not To be used for life support! 

• Hot dipped galvanized 


115-SLES250X02 1/4” 2” 500 0.05 lbs 

115-SLES312X02.25 5/16” 2-1/4” 800 0.06 lbs 

115-SLES375X02.50 3/8” 2-1/2” 1200 0.20 lbs 

115-SLES500X03.25 1/2” 3-1/4” 2200 0.42 lbs 

115-SLES625X04 5/8” 4” 3500 0.65 lbs 

115-SLES750X04.50 3/4” 4-1/2” 5200 1.20 lbs 


300-01568-2 3/16” 525 1.00 lbs 

300-02068-2 3/16” 600 2.00 lbs 

300-02068-2-SN 3/16” 600 Snatch Block 1.50 lbs 

300-02568-2 1/4” 685 2.00 lbs 

300-03068-2 1/4” 800 2.50 lbs 


300-03568-2 5/16” 1550 5.00 lbs 


300-04068-2 3/8” 1700 6.40 lbs 


300-05068-2 3/8” 1850 9.30 lbs 

Phone: 800.952.7325 Fax: 845.338.1372 


28

Wire Rope Blocks 

Flat Mount Single Wire Rope 

Block 

• Combination of bronze and steel bushings, 

designed for high load and medium speed 

applications 


Swivel Eye Single Wire Rope Block 





300-01558 3/16” 525 0.30 lbs 

300-02058 3/16” 600 0.50 lbs 


300-02558 1/4” 685 2.00 lbs 

300-03058 1/4” 800 1.00 lbs 


300-03558 5/16” 1550 2.30 lbs 


300-04058 3/8” 1700 3.10 lbs 


300-05058 3/8” 1850 4.60 lbs 


300-01548 3/16” 525 0.50 lbs 

300-02048 3/16” 600 0.70 lbs 


300-02548 1/4” 685 1.00 lbs 

300-03048 1/4” 800 1.40 lbs 


300-03048-SN-5/16 5/16” 800 Snatch Block 1.40 lbs 

300-03548 5/16” 1550 3.10 lbs 

300-03548-SN 5/16” 800 Snatch Block 3.10lbs 


300-04048 3/8” 1550 3.60 lbs 


300-05048 3/8” 1850 5.20 lbs 

Flat Mount Double Wire Rope 

Block 



applications 

• Oiled Bushings for permanent selflubrication 

Swivel Eye Double Wire Rope 

Block 

• Oiled Bushings for permanent selflubrication 


300-01558-2 3/16” 525 0.50 lbs 

300-02058-2 3/16” 600 1.00 lbs 


300-02558-2 1/4” 685 2.00 lbs 

300-03058-2 1/4” 800 2.50 lbs 


300-03558-2 5/16” 1550 4.00 lbs 


300-04058-2 3/8” 1700 5.50 lbs 


300-05058-2 3/8” 1850 8.30 lbs 


300-01548-2 3/16” 525 1.00 lbs 

300-02048-2 3/16” 600 1.50 lbs 


300-02548-2 1/4” 685 2.50 lbs 

300-03048-2 1/4” 800 2.50 lbs 


300-03548-2 5/16” 1550 5.00 lbs 


300-04048-2 3/8” 1700 6.30 lbs 


300-05048-2 3/8” 1850 9.10 lbs 



Wire Rope Blocks / Snatch Blocks 

Swivel Hook Single Wire Rope Block 

• Stainless steel Hook latch 

• Combination of bronze and steel bushings, designed for 

high load and medium speed applications 


Snatch Blocks Hook 

• Equipped with bronze bushings and grease fitting 

• Swivel hook & latch connection 

Item ID 

Max Cable Length WLL (lbs) Style Weight 

(in) 

300-01578-SL 3/16” 525 0.50 lbs 

300-02078-SL 3/16” 600 0.70 lbs 

300-02078-SN-SL 3/16” 525 Snatch Block 0.70 lbs 

300-02578-SL 1/4” 685 1.00 lbs 

300-03078-SL 1/4” 800 1.40 lbs 


300-03578-SL 5/16” 1550 3.10 lbs 



300-04078-SL 3/8” 1700 3.80 lbs 


300-05078-SL 3/8” 1850 5.30 lbs 


Item ID WLL (tons) Sheave Size (in) Wire Rope Size (in) Weight 

340-6I-2T3 2 3” 5/16-3/8” 5.10 lbs 

340-6I-4T4 4 4.5” 3/8-1/2” 13.25 lbs 

340-6I-8T6 8 6” 5/8-3/4” 27.00 lbs 

340-6I-8T8 8 8” 5/8-3/4” 36.00 lbs 

340-6I-15T10 15 10” 3/4-7/8” 75.00 lbs 

340-6I-15T8 15 8” 3/4-7/8” 60.00 lbs 

Snatch Blocks Shackle 

• Screw pin shackles that attach quickly and securely to 

D-rings or boom end 

• Suitable for wire rope 

Swivel Hook Double Wire Rope Block 

• Stainless Steel Hook Latch 



applications 



340-6I-SW2T 2 3” 5/16-3/8” 5.05 lbs 

340-6I-SW4T 4 4.5” 3/8-1/2” 13.50 lbs 

340-6I-SW8T 8 6” 5/8-3/4” 27.40 lbs 

Item ID 

Max Cable Length WLL (lbs) Style Weight 

(in) 

300-01578-2-SL 3/16” 525 1.00 lbs 

300-02078-2-SL 3/16” 600 1.50 lbs 

300-02078-2-SN-SL 3/16” 600 Snatch Block 1.50 lbs 

300-02578-2-SL 1/4” 685 2.00 lbs 

300-03078-2-SL 1/4” 800 2.50 lbs 


300-03578-2-SL 5/16” 1550 5.50 lbs 


300-04078-2-SL 3/8” 1700 6.50 lbs 


300-05078-2-SL 3/8” 1850 9.30 lbs 

Snatch Blocks with Chain 

• All BA Products Snatch Blocks feature 

bronze bushings with greased fittings 

• Easy opening side plates open without 

coming apart 

• WARNING: Never Exceed the Working 

Load Limit. 


340-6I-2TSW30 2 3” 5/16-3/8” 8.23 lbs 

340-6I-4TSW30 4 4” 3/8-1/2” 18.25 lbs 

Phone: 800.952.7325 Fax: 845.338.1372 


30

Blocks 

Campbell® Single Sheave 

Wood Shell Block 

• Round Loose Hook “AF” 

• Drop Forged Fittings 

• Galvanized Metal Parts 

Campbell® Triple Sheave Wood 

Shell Block 




Item ID Sheave Size (in) Rope Size WLL (lbs) Weight 

306-7205336 3” 3/8” 500 1.00lbs 

306-7205436 4” 1/2” 1000 2.00 lbs 

306-7205536 5” 5/8” 1200 2.50 lbs 

306-7205636 6” 3/4” 1800 4.00 lbs 


306-7208536 4” 1/2” 1800 4.00 lbs 

306-7208636 5” 5/8” 2400 5.50lbs 

306-7208736 6” 3/4” 3200 9.00 lbs 

Campbell® Double Sheave 

Wood Shell Block 




Beam Clamps 

• Reduces flange stress by distributing 

the load away from the flange edge 

• For Permanent or Temporary Mounting 


306-7206836 3” 3/8” 800 3.00lbs 

306-7206936 4” 1/2” 1400 3.00 lbs 

306-7207036 5” 5/8” 1800 4.00 lbs 

306-7207136 6” 3/4” 2500 6.50 lbs 

Item ID WLL (tons) Flange Width Weight 

115-BC-1 1 3-9” 10.13 lbs 

115-BC-2 2 3 - 9” 10.13 lbs 

115-BC-3 3 3.2-12.5” 21.79 lbs 

115-BC-5 5 3.6-12.5” 25.48 lbs 

Note 

All blocks have a common iron bearing and a becket. Shackle or swivel hook, 

roller bearing, and self-lubricating bearing also available. 

Questions? 

EMAIL US! 

cs@peaktrading.com 

CALL US! 

800 952 7325 

For Pricing: Contact your Sales Rep 

or email us at cs@peaktrading.com 



Swaging Tools 

ARM® Swaging Tools Multi 

Cavity 

• Hand Operated 

• All models are supplied with go-no go 

gauge 

Locoloc® Swaging Tools 

Bench Style 

• This Tool is for Copper and Aluminum 

Sleeves Only 


618-HSC-350 1/16-1/8” 2.43 lbs 

618-HSC-600 1/16-3/16” 6.00 lbs 

ARM® Swaging Tools Bench 

Style 

• Multi-compression jaws to swage 

• Bolts to your work bench and is excellent 

for mass production of snares, drowner 

slides, cabled stakes, snare extension 

Item ID Length (in) Weight 

621-1-BSC 22-1/2” 6.60 lbs 

Locoloc® Swaging Tool 

Gauges 

• Proper swaging of Locoloc aluminum, 

copper and stainless steel sleeves. 

• Locoloc Sleeve Gauges GA-1P will 

measure all oval or stop sleeves used 

on 1/32”, 3/64”, 1/16”, 3/32”, 1/8”, 

5/32”, and 3/16” oval and stop sleeves 


618-HSC-600BB 1/16-3/16” 11.02 lbs 


Single Cavity 

• Has a single compression die for oval 

and stop sleeve swaging 

Item ID Size Length Weight 

621-0-3/32 3/32” 20” 4.20 lbs 

621-0-1/8 1/8” 20” 4.20 lbs 

621-0-3/16 3/16” 20” 4.20 lbs 

621-0-7/32 7/32” 28” 5.00 lbs 

621-0-1/4 1/4” 28” 5.81 lbs 

621-0-5/16 5/16” 28” 5.00 lbs 

Item ID Measures (in) Weight 

621-GA-1P 1/32”, 3/64”, 1/16”, 3/32”, 1/8”, 5/32”, 0.13 lbs 

& 3/16” 

621-GA-2P 7/32”, 1/4”, 9/32”, & 5/16” 0.12 lbs 

Nicopress® #63 & #64 

Swaging Tools 

• Nicopress® Nos. 63 and 64 Swaging 

Tools are multiple sleeve-pressing 

groove hand tools 

• The No. 63V-XPM has three grooves 

• The No. 64CGMP has four grooves 


323-63V-XPM 1/8”, 5/32”, 3/16” 6.50 lbs 

323-64-CGMP 1/16”, 3/32”, 1/8”, 5/32” 6.50 lbs 

Nicopress® #51 

Swaging Tools 

• Single sleeve-pressing groove for a 

particular size of cable 


Multi Cavity 

• Cuts up to 7/32” diameter 

• This Tool is for Copper and Aluminum 

Sleeves Only 


621-1-SC 26” 6.50 lbs 


323-51-MJ 3/32-7/32” 5.00 lbs 

Nicopress® #3 

Swaging Tools 

• Used for No. 18-13-G9 and No. 28-13- 

G9 Oval Sleeves for 5/16” cable. Tool 

length is 33” 


323-3-F6-950 1/4” 13.00 lbs 

Phone: 800.952.7325 Fax: 845.338.1372 


32

Swaging Tools 

Nicopress® #10 & #300 

Bench Tools 

• For cable sizes 1/8” through 5/32” 

only, one press is made per splice 

• Prices Do Not Include Heads Heads Are 

Sold Seperately 

Nicopress® 5606 Swaging Tool 

• Battery-powered 

• Jaws rotate 360° 

• REPLACEABLE DIES - Sold Separately 

Item ID Model # Weight 

323-300 300 19.00 lbs 

323-510 510 6.00 lbs 

Nicopress® Swaging Tool 

Heads 

• Nicopress® Tool heads are exclusively 

for Nicopress brand tools 


323-5606 3/64” - 3/8” 17.60 lbs 

Locoloc® Swaging Tool Kit 

• The Kit Includes: (1) 1SC Swaging tool w/ 

NoGo Gauge (1) Felco C7 Cable Cutter 

(100) 1/16, 3/32, 1/8, 5/32, 3/16 

Swage Sleeves (100) 3/32, 1/8 Swage 

Stops 

• Available with either aluminum or copper 

fittings 


323-63V-XPMHEAD 1/8-3/16” 2.20 lbs 

323-3-F6-950HEAD 1/4” 4.40 lbs 

Item ID Material Weight 

621-SWKITASL-1SC Aluminum 19.00 lbs 

621-SWKITCSL-1SC Copper 32.00 lbs 


Hydraulic 

• A hand swager, exerting 14 tons of pressure 

• A few strokes of handle bring the dies from 

wide open to contact with the fitting to be 

swaged 

• The internal valve automatically shifts from 

the low pressure pump stage to the high 

pressure compression stage 


621-#3-H 24” 15.00 lbs 

Locoloc® HC-5010-R Swaging 

Tool 

• Operates in confined spaces and 

accommodates one hand operation 

• 6 ton output 

• HC-5010-R comes with 1 carrying case, a 

battery charger, two (2) TBP-80 Lithium 

Ion Batteries and a carrying strap. One 

battery can be used while the other is 

charging. REPLACEABLE DIES - Sold 

Separately 

All compressions must be gauged to 

assure maximum holding strength, and it is 

recommended that all assemblies should be 

proof tested. 

*Only applies to Locoloc® Swaging Tools 

NUMBER OF COMPRESSIONS 

Cable Alum & Copper SS 

Diameter Oval Sleeves Stop Sleeves Oval Sleeves 

3/64” 2 1 1 

1/16” 2 1 1 

3/32” 2 2 1 

1/8” 3 2 2 

5/32” 3 2 3 

3/16” 4 2 4 

7/32” 4 2 4 

1/4” 4 3 5 

9/32” 4 3 - 

5/16” 5A/4C 3 - 

3/8” - 3 - 


621-HC-5010-R 22” 8.75 lbs 



Swaging Tools 

Locoloc® Dies for HC-3010, 

HC-5010 

• Heat treated steel 

• Each die includes top & bottom (die set) 

and gauge 

Nicopress® 6 Series Dies 

Copper 

• Specifically engineered and designed to 

be used with Nicopress Copper Sleeves 

• Nicopress 6 Series Dies come with top 

and bottom die (die set) and gauge 


621-DI2-4 1/8” 0.22 lbs 

621-DI2-6 3/16” 0.21 lbs 

621-DI2-8 1/4” 0.19 lbs 

Item ID 

Weight 

323-6-OVAL-B4 

0.50 lbs 

323-6-OVAL-C 1/16” 0.50 lbs 

323-6-OVAL-M 1/8” 0.50 lbs 

323-6-OVAL-X 3/16” 0.50 lbs 

323-6-OVAL-F6 1/4” 0.50 lbs 

Bolt-Chain Cutters Import 

• Jaws made of drop forged high-grade 

alloy tool steel 

• Heat-treated, precision cutting edges 

Item ID Capacity (in) Length (in) Jaw Type Weight 

205-BOLTCUTTER18 5/16” 18” Center Cut 4.41 lbs 




C7 

C9 

C12 & C16 

Felco® Wire Rope Cutters 

• Swiss made, these cable cutters are 

recognized throughout the world for 

their precision manufacture and cutting 

capabilities 

• Made from the highest quality case 

hardened tool steel, Felco’s proprietary 

tempering process ensures the hardest 

and longest lasting cutting blade surfaces 

• Plastic coated handles provide a firm 

comfortable grip 

• All cutters are tested before leaving the 

factory 

RC-8 

RC-450 

Nicopress® 12 Series Dies 

Copper 

• Specifically engineered and designed to 

be used with Nicopress Copper Sleeves 

• Nicopress 12 Series Dies come with top 

and bottom die (die set) and gauge 


323-12-OVAL-X 3/16” 0.50 lbs 

323-12-OVAL-F6 1/4” 0.50 lbs 

323-12-OVAL-G9 5/16” 0.50 lbs 

323-12-OVAL-H5 3/8” 0.50 lbs 

323-12-OVAL-K8 1/2” 0.50 lbs 

ARM® Wire Rope Cutters 

• Used for cutting 1/16 to 5/8 inch cable 

C112 

RC-800 

Item ID Length (in) Max Cut (in) Weight 

746-C7 8” 3/16” 0.63 lbs 

746-C9 13” 1/4” 1.50 lbs 

746-C12 19” 3/8” 3.00 lbs 

746-C16 23” 5/8” 5.00 lbs 

746-C112 29” 1/2” 8.25 lbs 


618-RC-8 3/16” 1.00lbs 

618-RC-450 17-3/4” 4.00lbs 

618-RC-800 31-1/2” 8.70lbs 

Phone: 800.952.7325 Fax: 845.338.1372 


34

Tie Down Equipment 

2” Ratchet Straps w Flat 

Hooks 

• Standard webbing 

• Flat hooks on each end 

G70 Grab Grab Binder Chains 

• High quality import grade 70 chain and hooks 

• Assembled chain with (1) grab hook on each 

end 

Item ID Chain Size WLL (lbs) Base Length (ft) 

200-BCG70GG312XXX 5/16” 4700 6’ 

200-BCG70GG375XXX 3/8” 6600 6’ 

Item ID Web Width (in) Length (ft) WLL (lbs) Weight 

200-TDRA2X27/10000F 2” 27’ 3335 5.80 lbs 

1” Ratchet Straps w Wire 

Hooks 


• Wire hook on each end 

G70 Slip Grab Binder Chains 

• High quality import grade 70 chain and hooks 

• Assembled chain with (1) slip hook and (1) grab 

hook 

• Slip hook includes latch 

Item ID Chain Size WLL (lbs) Base Length (ft) 

200-BCG70SG375XXX 3/8” 6600 6’ 

200-BCG70SG312XXX 5/16” 4700 6’ 


200-TDRA1X016/1000W 1” 16’ 1000 1.56 lbs 

Ratchet Load Binders 

• Powder painted finish 

2” Ratchet Straps w Wire 

Hooks 


• Wire hook on each end 

Item ID Size WLL (lbs) Take Up (in) Weight 

200-LBRATCHET312/375 5/16-3/8” 6600 8” 10.00 lbs 

200-LBRATCHET375/500 3/8-1/2” 9200 8” 12.90 lbs 

200-LBRATCHET500/625 1/2-5/8” 13,000 8” 14.55 lbs 


200-TDRA2X27/10000W 2” 27’ 3335 6.08 lbs 

Lever Load Binders 

• Powder painted finish 

Never exceed the Working Load Limit. 

Do not operate the binder while you 

or anyone else is on the load. When 

applying the binder, always position 

the load binder so the handle is 

tightened in a downward manner. 

Item ID Size WLL (lbs) Take Up (in) Weight 

200-LBLEVER250/312 1/4-5/16” 2600 3” 3.80 lbs 

200-LBLEVER312/375 5/16-3/8” 5400 4.25” 7.02 lbs 

200-LBLEVER375/500 3/8-1/2” 9200 4” 12.50 lbs 




TIE DOWN EQUIPMENT 



3-Strand Rope 

Nylon 3-Strand Rope 

• 3-Strand White Nylon Rope is one of the 

strongest synthetic fiber ropes, offering superior 

elasticity and excellent abrasion resistance 

Manila 3-Strand Rope 

• Premium grade with 36 min becker value. 

Item ID Size Color MBS (lbs) Available Put ups 

166-3S0250WH-XXXX 1/4” White 1650 100, 600, 1200 

166-3S0375WH-XXXX 3/8” White 3700 100, 600, 1200 

166-3S0500WH-XXXX 1/2” White 6400 100, 600, 1200 

166-3S0625WH-XXXX 5/8” White 10,400 100, 600, 1200 

166-3S0750WH-XXXX 3/4” White 14,200 100, 600 

166-3S1000WH-XXXX 1” White 25,000 100, 600 

Poly Dac 3-Strand Rope 

• Perfect choice to use in combination with 5/8” 

rope grab 


168-3S0500WH-XXXX 1/2” White 3,780 600, 1200 

168-3S0625WH-XXXX 5/8” White 7200 600, 1200 

168-3S0750WH-XXXX 3/4” White 7,650 600, 1200 

168-3S0250WH-XXXX 1/4” White 1,300 600, 1200 

168-3S0375WH-XXXX 3/8” White 2,881 600, 1200 

168-3S1000WH-XXXX 1” White 17,000 600 


172-3S0250-XXXX 1/4” Natural 540 100, 600, 1200 

172-3S0312-XXXX 5/16” Natural 900 600, 1200 

172-3S0375-XXXX 3/8” Natural 1,215 100, 600, 1200 

172-3S0500-XXXX 1/2” Natural 2,385 100, 600, 1200 

172-3S0625-XXXX 5/8” Natural 3,960 100, 600, 1200 

172-3S0750-XXXX 3/4” Natural 4,860 100, 600, 1200 

172-3S0875-XXXX 7/8” Natural 6,930 600, 1200 

172-3S1000-XXXX 1” Natural 8,100 100, 600, 1200 

Never exceed the Working Load Limit. 

Attachments must have at least the 

same working load limit as the rope 

used. Keep out from under a raised 

load. Destroy, rather than discard 

retired rope. Inspect rope frequently 

and store properly. Avoid overheating, 

shock loads, chemicals, rust and 

abrasion. 

Avoid abrasion and unnecessary 

wear. Outer fibers as well as inner 

contribute to a rope’s strength. When 

outer fibers are worn by chafing or 

dragging, rough or gritty surfaces, the 

rope worn will become weakened. 

Rope Fiber 

Information 

Fiber Type Nylon Poly Dac Manila 

Strength Excellent Good Poor 

Wet vs. Dry Strength 85% 100% 115% 

Shock Load Ability Excellent Good Poor 

Water Absorption 6% 0% 100% 

Melting Point 480 °F 305 °F N/A 

Abrasion Resistance Good Good Good 

Resistance to Sun Good Good Good 

Resistance to Rot Excellent Excellent Poor 

Resistance to Acid Poor Good Poor 

Flexing Endurance Excellent Good Poor 

Storage Requirements Wet or Dry Wet or Dry Dry Only 

Phone: 800.952.7325 Fax: 845.338.1372 


36

IMPORTANT – READ WARNINGS BEFORE USING 

All products are sold with the understanding that the 

purchaser is familiar with their safe use and correct 

application. Peak Trading Corporation assumes no 

responsibility for the use or misapplication of any product it 

sells. Responsibility for design and use decisions rests with 

the user. 

SAFETY WARNINGS 

RAISED LOAD 

Keep out from under a raised load. Take notice of the 

recommendation from the National Safety Council Accident 

Prevention manual concerning all lifting operations: 

All employees working with cranes or hoists or 

assisting in hooking or arranging a load should be instructed 

to keep out from under the load. From a safety 

standpoint, one factor is paramount: Conduct all lifting 

operations in such a manner, that if there were an equipment 

failure, no personnel would be injured. This means 

keep out from under a raised load and keep out of the 

line of force of any load. 

REGULAR INSPECTION 

Inspect products regularly for visible damage, cracks, wear, 

elongation, rust, etc. Protect all products from corrosion. 

No product can keep operating at its rated capacity indefinitely. 

Periodic inspections help determine when to replace 

a product and reduce rigging hazards. Keep inspection 

records to help pinpoint problems and to ensure periodic 

inspection intervals. 

Frequency of inspection will depend on environmental 

conditions, application, storage of product prior to use, 

frequency of use, whether or not life, limb, or valuable 

property are at risk, etc. When in doubt, inspect products 

prior to each use. Carefully check each item for wear, deformation, 

cracks, or elongation — a sure sign of imminent 

failure. Immediately withdraw such items from service. Rust 

damage is another potential hazard. When in doubt about 

the extent of corrosion or other damage, withdraw the items 

from service. 

Destroy, rather than discard, items that have been judged 

defective. They might be used by someone not aware of the 

hazard of the defect. 

IMPORTANT WARNINGS 

Remember that any product will break if abused, misused or 

overused. Therefore: 

• Never exceed the working load limit. 

• Match components properly. 

• Keep out from under a raised load. 

• Avoid shock loads. 

• Inspect products regularly. 

WORKING LOAD LIMITS 

Never exceed the working load limit (WLL), safe working 

load (SWL), or rated capacity. The working load limit is 

the maximum load which should never be applied to the 

product, even when the product is new and when the load is 

uniformly applied - straight line pull only. Avoid side loading. 

All catalog ratings are based upon usual environmental 

conditions, and consideration must be given to unusual 

conditions such as high or low temperatures, chemical 

solutions or vapors, prolonged immersion in salt water, etc.. 

Such conditions or high-risk applications may necessitate 

reducing the working load capacity. Working load limit will 

not apply if product has been welded or otherwise modified. 

MATCHING COMPONENTS 

Components must match. Make certain that components 

such as hooks, links, shackles, etc., used with wire rope (or 

chain or cordage), are of suitable material and strength to 

provide adequate safety protection. Attachments must be 

properly installed and must have a working load limit at least 

equal to the products with which they are used. Remember 

that any chain is only as strong as its weakest link. 

SHOCK LOADS 

Avoid impacting, jerking, or swinging of load – working load 

limit will not apply. A shock load is generally significantly 

greater than the static load. Avoid shock loads.

SHOP ONLINE at www.peaktrading.com 

Register! To see pricing instantly! 

& 

*Registration will take 1 day or less 

● In-stock products ordered by 3 pm ship same day! 

● Same-day quotes from your dedicated Sales Rep! 

Wire Rope 


• Galvanized 

• Bright 

• Aircraft Cable 

• IWRC 

• Fiber Core 

• Cable Laid 

• Crane Cables 

• PVC Coated 

• Strand 

• Specialty 

• Roll-Off Cables 

Cable Assemblies 

• Conduit 

Assemblies 

• Miniature 

Assemblies 

• Coated Cable 

Assemblies 

• Custom 

Assemblies 

• Light Safety Cables 

• Security Cables 

• Lanyards 

• Cable Ladders 

Hardware 

• Cable Fittings 


• Gripples 

• Turnbuckles 

• Adjustable Clamps 

• Strandvises 

• Eyebolts 

• Rapid Links 

• Beam Clamps 

• Hooks 

• Shackles 

• Snaps 

• Swivels 

• Wire Rope Clips 

• Sheaves 

Chain 

• G30 Proof Coil 

• G43 High-Test 

• G70 Transport 

• G80 Alloy 

• G100 Alloy 

• Jack 

• Binder 

• STAC 


• BBB 

• Plastic 

• Aluminum 

• Tire 

• Tow 

• Weldless 

Rope 

• Polyester 

• Nylon 

• Dacron (poly) 

• Polypro 

• Sisal 

• Sash Cord 

• Bungee Cord 

• Truck Rope 

• Cargo Nets 

• Safety Nets 

• Solid Braid 

• Double Braid 

• Manila 

• 3-Strand 

• Theatrical Rope 

• Arborist Ropes 

• Dynamic Climbing 

• 12-Strand 

Hoists and Tools 

• Bull Pins 

• Swage Tools 

• Erection Wrenches 

• Klien Pliers 

• Load Binders 

• Electric Hoists 

• Haven Grips 

• Tool Bags 

• Bottle Jacks 

• Bolt Cutters 

• Come-A-Longs 

• Winches 

• Griphoist 

• Wire Mesh Grip 

• Cable Cutters 

• Lineman Wrenches 

• Cable Pullers 

• Load Cells 

Rope/Rescue Equipment 

• Carabiners 

• Figure Eights 

• Ascenders 

• Descenders 

• Swivels 

• Pulleys 

• Gloves 

• Tripods 

• Harness Gear 

• Daisy Chains 

• Retrieval Winch 

Safety 

• Full Body 

Harnesses 

• Ladder Systems 

• Vertical Lifelines 

• Anchor Systems 

• Safety Glasses 

• Hardhats 

• Lanyards 

• Horizontal 

Lifelines 

• Retractable 

Lifelines 

• Rope Grabs 

• Shock Absorbers 

Lifting Slings and Tie Downs 

• Wire Rope Slings 

• Chain Slings 

• Nylon Slings 

• Roundslings 

• Winches 

• Winch Bars 

• Winch Straps 

• Rubber Straps 

• Ratchet Straps 

Blocks and Accessories 

• Crane Blocks 

• Manilla Rope 

Blocks 

• Sheaves 

• Swivels 

• Snatch Blocks 

• Overhaul Balls 

• Spreader Bars 

• Block and Falls 

Manufacturers We Carry (partial list) 

Block Division 

Caldwell 

Campbell 

Chicago Hardware 

CMI 

Coffing 

Columbus McKinnon 

Crosby 

DBI/SALA 

Felco 

Gripple 

Griplock 

Gunnebo Johnson 

JET 

Kinedyne 

Klein Tools 

Lift-All 

Liftex 

Omega Pacific 

Petzl 

New England Ropes 

Nicopress 

Samson Rope 

Sterling Rope 

Suncor 

Wireco 

Yale Rope

Peak Trading Corp 

1 Tomsons Rd, #100 

Saugerties, NY 12477 

PEAK TRADING CORP 

A direct importer and domestic wholesale distributor 

1 Tomsons Road #100, Saugerties, NY 12477 

800.952.7325/845.338.1325 

F: 845.338.1372 E: cs@peaktrading.com 


1997 CELEBRATING 20 YEARS 2017

Peak Catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?