NEW ERMAKSAN Fibermak Momentum Gen-3

• The laser beam produced in laser source is carried to
the head by the fiber cable. The cutting head transfers
the laser beam from the fiber cable to the processing
surface.
• The fiber cable is fixed at the top side of the cutting
head.
• The beams arranged in the collimation unit are
transferred to the focusing unit.
• The focusing unit lenses focus the laser beam to the
desired value.
• The Protection Glass prevents slag from damaging the
lenses.
• Instant system control can be done by the LEDs on the
cutting head.
• The Height Sensor Insert is an element of the height
control and the machining surface. The information from
the height sensor is converted into numerical values by
transferring to the upper unit.
• Nozzle directs the auxillary gases. Along with this, it
helps to make height control.
Bevel Head (Optional)
ProCutter Zoom Head (Optional)
• Through the motor controlled biaxial cutter
head, it can move +- 45 degrees
• For angled welding operations of 45
degrees or less, it is possible to cut
angularly in a planar manner to open a
welding groove
• Fast cuts in fine materials, quality cuts in thick
materials
• Higher focal length
• Changeable Spot Size