Elation Katalog 2011 NEU_Elation Katalog 2009
Elation Katalog 2011 NEU_Elation Katalog 2009
Elation Katalog 2011 NEU_Elation Katalog 2009
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
56<br />
ELATION FLEXLED TAPE is a very thin and flexible LED circuit strip mounted inside a silicone water proof sleeve. It can be cut every<br />
5cm and put back together using simple soldering techniques and silicone seal kit. It comes available in RGB and Single Color versions.<br />
High output, low heat and easy installation make this product the ideal product for a variety of applications.<br />
FLEX RGB WP tape<br />
The RGB version has been prefabricated in a 3m spool with 60 x 5cm circuit strips holding 3 SMD LED’S each for a total of 180 120° SMD<br />
LED’s. You will need a 12V power supply and a control option to make the tapes work. The Power supplies offered are UL, CE and CSA approved<br />
or recognized.<br />
There are two control options available to operate the FLEX RGB tape.<br />
Option 1: An infrared wireless controller system to change colors which allows you to select 16 static colors or run color fades plus 2 intensity<br />
settings.<br />
Option 2: A DMX driver that will give you 3 DMX channels and allow you to use the DMX controller of your choice. This will allow you to<br />
create specific colors, 0-100% dimming and program intensity levels of your choice. Needed items are ELAR Driver 1 and S-150-<br />
12.<br />
FLEX R,G,B,WW(2,700K) & CW (6,000K) single color tapes<br />
The single color tapes are prefabricated in 6m Spools with 120 x 5cm black circuit strips holding 3 SMD LED’S each for a total of 360 120°<br />
SMD LED’s. You will need a 12V power supply and a control option to make the tapes work. The Power supplies offered are UL and CSA<br />
approved. There are two options available to operate the FLEX single color tape.<br />
Option 1: A simple 12V Power supply that will power on the tape. You will need some type of power interrupter switch them on and off.<br />
Option 2: A DMX Driver like ELAR Driver 1 or Acclaim X-DIMMER-1 that will give you at least 1 DMX channel and allow you to use the<br />
DMX controller of your choice. This will allow you 0-100% dimming and program intensity levels of your choice.<br />
Code 1226300014 FLEX RGB WP - Flexstrip LED RGB 3m roll<br />
Code 1226300012 FLEX WW WP - Flexstrip LED Lite warm white 6m roll<br />
Code 1226300011 FLEX CW WP - Flexstrip LED Lite cold white 6m roll<br />
Code 1226300008 FLEX R WP - Flexstrip LED Lite red, 6m roll<br />
Code 1226300013 FLEX G WP - Flexstrip LED Lite green 6m roll<br />
Code 1226300010 FLEX B WP - Flexstrip LED Lite blue, 6m roll<br />
Code 1226300009 FLEX Y WP - Flexstrip LED Lite yellow, 6m roll<br />
OUTDOOR / ARCHITECTURAL LED<br />
FLEX TAPE WP<br />
• Full RGB Spectrum Available<br />
• DMX controllable<br />
• IP 65 Outdoor Rated<br />
• 180 SMD-RGB LEDs On 3m<br />
• 16,6mm Pixel Pitch<br />
• 120° Light Dispersion<br />
• Works With 12 Volt
Change language