Eduard Gottfr. Ferne GmbH & Co. KG Werkzeugfabrik seit 1853

2
TURNUS TURNUS
a KUKKO - associate enterprise
a KUKKO - associate enterprise
Saw-sharpening vise
128
ORIGINAL TURNUS Hand Vises
Machinist’s hand vise
with hexagonal nut and
wrench
Machinist’s hand vises
made especially for maximum loads with broad jaws,
with hexagonal nut and wrench,
drop-forged, up to 45,000 MP gripping power
Art. Length Jaw width Spread
no. mm mm mm kg
109-160 160 65 40 2.150 2
109-180 180 70 40 2.600 2
109-200 200 80 50 3.450 2
109-250 250 90 60 5.400 1
Spare spindles
with hexagonal nut
Art. For length Spindle Spindle
no. mm length mm diameter mm kg
106-201 160 135 16 0.300 2
109-181 180 150 18 0.500 2
109-181 200 150 18 0.500 2
109-251 250 180 20 0.700 1
Spare wrench
Art. For length Spindle
no. mm diameter mm kg
109-162 160 16 0.220 1
109-182 180 18 0.320 1
109-182 200 18 0.320 1
109-252 250 20 0.700 1
Saw-sharpening and hoop vises
with slender jaws, 45° offset
indispensable for holding saw blades during sharpening, for making
hoops, for soldering work, and for holding parts of complicated
geometry.
To be used only in combination with a bench vise.
Art. Length Jaw width Spread
no. mm mm mm kg
112-125 125 30 30 0.650 2
112-150 150 40 35 1.000 2
Pin vises
for sundry precision work, particularly for watchmakers
completely nickel-plated and fine-finished
with knurled handle.
With wide or pointed jaws.
Art. Type Length Jaw width
no. mm mm kg
113-115 wide jaws 115 16 0.055 1
113-116 pointed jaws 115 7 0.053 1
113-130 wide jaws 130 20 0.080 1
113-131 pointed jaws 130 10 0.070 1
Complete spare spindles
Art. For length
no. mm g
pointed jaws wide jaws
113-117 115 4 1
113-132 130 5 1