Moeller_2018Catalog

Water Tanks / Waste Tanks
MOELLER WASTE TANKS
Each tank features a nominal wall thickness of 0.30 in.
(7.6 mm) to control odor which would otherwise permeate
through the walls. NPT openings for vent, fill,
and pumpout are standard. Refer to the diagram on
the right. The position of the vent is the same for all
waste tanks. The fill and pumpout position (dimension
D2) varies for each tank, and is provided with the tank
dimensions below.
WASTE TANKS
Part No.
Description
L W H D1
in. mm in. mm in. mm in. mm
041204 4 Gallon/ 15 L 10.25 260 9.25 235 9.25 235 5.12 130
041206 5 Gallon/ 19 L 16.00 406 11.75 298 8.00 203 5.88 149
041209 9 Gallon/ 34 L 17.00 432 13.75 349 10.25 260 6.88 175
041215 12 Gallon/ 45 L 24.25 616 15.25 387 8.75 222 7.63 194
041220 20 Gallon/ 76 L 21.00 533 17.00 432 14.00 356 8.50 216
041224 24 Gallon/ 91 L 22.50 572 22.50 572 12.00 305 11.25 286
041225 25 Gallon/ 95 L 29.50 749 16.63 422 12.75 324 8.31 211
041229 28 Gallon/ 106 L 23.50 597 20.00 508 15.50 394 10.00 254
041230 30 Gallon/ 114 L 28.00 711 23.00 584 11.50 292 11.50 292
041234 37 Gallon/ 136 L 27.00 686 17.00 432 20.00 508 8.50 216
041239 39 Gallon/ 148 L 32.00 813 21.50 546 14.50 368 10.75 273
041245 45 Gallon/ 170 L 35.25 895 20.88 530 15.25 387 10.44 265
041232 76 Gallon/ 288 L 61.00 1549 19.00 483 16.00 406 9.75 248
041277 77 Gallon/ 291 L 35.63 905 23.25 591 22.81 579 11.63 295
041233 97 Gallon/ 367 L 46.00 1168 26.00 660 20.00 508 13.00 330
Moeller has the
right tank for you.
041311
Straight Pipe-to-Hose Kit
Contains parts required to attach hoses to tanks
(2) 1/2 NPT
1/2 in. Barb
(2) 1-1/2 NPT
1-1/2 in. Barb
50
(1) 1-1/2 in. MNPT
1/2 in. FNPT Reducer
Thread Sealing Tape
041390
90° Pipe-to-Hose Kit
Contains parts required to attach hoses to tanks
(2) 1/2 NPT
1/2 in. Barb
(2) 90° 1-1/2 NPT
x 1-1/2 in. Barb
(1) 1-1/2 in. MNPT
1/2 in. FNPT Reducer
Thread Sealing Tape
For package dimensions go to
www.moellermarine.com