Razor LED Light Box

Razor 

Razor LED Light Box 

• Edge-lit LED illumination 

• Ultra slim modern design 

• Even light distribution 

• Easy poster change 

• Low energy consumption 

• Single or double sided 

• Indoor use 

• Easy to install / easy to handle 

• Long life, high quality 

• RAL colour finishes available

The Razor LED light box is the ultimate ultra slim light box for illuminated promotional 

display graphics, with all-round superiority over any comparable products, particularly 

in relation to its higher brightness, more even light distribution and better build quality. 

At only 26mm deep single sided (39mm deep double sided), Razor LED light boxes 

are so slim line they are essentially illuminated poster frames. They can be produced 

this thin because they use a strip of high bright LED lights to illuminate a sheet of 

pure clear acrylic from the sides. The LED lights emit such a high bright light that it 

gives the Razor light box the brightest and most even illumination available from any 

edge-lit light box. 

Razor light boxes have a 32mm aluminium snap frame on the front for quick and 

easy front loading graphic change. There are three snap frame options: the Razor 

light box classic frame is semi-curved; the Razor Pro light box has a contemporary 

looking flat frame and the Razor Tamper Proof light box has a curved frame and 

comes with an opening tool for security. The aluminium snap frames come in silver 

anodised finish as standard or can be powder coated to a choice of RAL colours. 

Razor LED light boxes are manufactured to the highest quality within Europe (CE 

certified) using top grade aluminium, pure acrylic and branded electrical components; 

including long life, high brightness, energy efficient LEDs. 

Razor light boxes are available in standard poster sizes or they can be custom made 

to any specific sizes up to the billboard poster size of 6 sheet (1800 x 1200mm) 

www.w-co.co.uk 

RAZOR 

08456 25 35 45 

info@w-co.co.uk 

• Edge-lit LED illumination 

• Ultra slim modern design 


• Easy open snap frame to change poster 


• CE certified 


• RAL colour finishes available 

RAZOR CLASSIC PROFILE 

19 

RAZOR PRO FLAT PROFILE 

20 

32 

32 

RAZOR TAMPER PROOF

Katana 

Katana Ultra Slim Light Box 


• Ultra slim 

• Long life fluorescent lamps 








• Modern design

the Katana ultra slim light box is a sleek and contemporary illuminated sign 

which is manufactured within Europe (CE certified) to the highest quality. 

these smart looking display light boxes have a front loading snap frame, like 

a poster frame, enabling quick and easy poster change. to enable this ultra 

thin light box to be so slim it is edge-lit using 16mm thin t5 fluorescent tubes 

illuminating a sheet of ultra pure acrylic from the side producing fantastically 

even light distribution. the aluminium frames are available in a classic curved 

profile or a stylish flat profile. Standard poster sizes are available from stock in 

a silver anodised finish as standard or they can be produced to bespoke sizes 

and can be powder coated to a RAL colour if required. 

KATANA 

• Ultra slim design just 35mm deep 


• Easy open click frame to change poster 

• Edge-lit technology 




PROFILE WIDtH 48mm 56mm 

48MM KAtAnA 56MM KAtAnA 

vISIBLE SIzE poster size - 13mm poster size - 14mm 

OvERALL SIzE poster size + 83mm poster size + 98mm 

POStER SIzE A4 A1 


08456 25 35 45 


KAtAnA CLASSIC PROFILE 

A3 A0 

48 / 56 mm 

KAtAnA PRO FLAt PROFILE 

48 / 56 mm 

A2 6 Sheet (1200mm x 1800mm) 

DEPtH single sided 35mm single sided 37mm 

DEPtH double sided 44mm double sided 46mm

Tanto 

Tanto Ultra Slim Light Box 


• Front loading graphic change 

• Ultra flat / no snap profile 






• Long life and high quality 


• Modern design

The Tanto ultra slim light box is edge lit using thin T5 florescent tubes to illuminate a 

sheet of clear acrylic. The unique feature with this light box is that it has a magnetic 

front cover, enabling extremely quick and easy change of graphics. This front cover 

is a 1mm sheet of anti-glare polycarbonate with magnetic tape on the inside which 

attaches to the light box profile. There is a 40mm wide, screen printed border on the 

cover, to conceal the magnetic tape, which gives it a very smart finish. Tanto light 

boxes are only 37mm deep (42mm double sided) and are available in A3, A2 and A1 

sizes and can be custom made for high quantities. 

TANTO 




• Magnetic front panel 





TANTO ULTRA SLIM 

vISIbLE SIzE poster size - 24mm 

OvERALL SIzE poster size + 60mm 

POSTER SIzES A3 A2 A1 

bORdER PRINT 40mm 

08456 25 35 45 


POWdER COATEd PROFILES ON dEMANd

Sabre 

Sabre Ultra Slim Light Box 


• Indoor / outdoor use 

• IP 66 rated (weatherproof) 

• Ultra flat 


• Corrosion free 





The Sabre ultra slim outdoor light box, is an extremely effective promotional 

tool for illuminated outdoor advertising applications. Edge-lit technology is 

used in the light box, with thin T5 fluorescent tubes illuminating a pure acrylic 

lighting panel from the side. For extra security the front cover is lockable with 

Allen screws at the bottom which makes the unit tamper resistant. To access 

the graphics the front cover is unlocked with an Allen key allowing the cover 

to pivot open and to be taken off. The graphic is held in place with a length of 

snap frame profile at the top which simply snaps open and closed on the print 

for quick and easy graphic changes. 

Sabre light boxes are made for external usage and have achieved a very high 

IP66 rating; this is made possible as the units have special built-in rubber seals 

to make them fully weatherproof. The overall depth of the light box is an ultra 

thin 44mm deep making it one of the thinnest outdoor light boxes available 

anywhere. 

This light box is available in standard sizes A2, A1, A0 and can be made in 

custom sizes for high quantities. The Sabre ultra slim outdoor light box is the 

perfect illuminated outdoor advertising tool for external locations such as: 

shopping precincts, car parks, restaurant wall menus, bus shelters, petrol 

station forecourts, railway stations, nightclub and cinema outdoor promotions 

and sports centres. 

SABRE 

• Ultra Slim Design just 44mm deep 

• Outdoor / indoor use 

• IP66 rated (weatherproof) 

• Security Lock (Allen key) 

• Hinging front panel 




DIMENSIONS 

vISIbLE SIzE HORIzONTAL: poster size - 8mm 

vERTICAL: poster size -18mm 

OvERALL SIzE HORIzONTAL: poster size + 92mm 

vERTICAL: poster size +82mm 

STANDARD 

POSTER SIzES 


08456 25 35 45 


A2 A1 A0 

POWDER COATED PROFILES ON DEMAND

Scimitar 

Scimitar Ultra Slim Light Box 



• IP 66 rated (weatherproof) 

• Ultra flat 







The Scimitar slim outdoor light box is an extremely effective illuminated outdoor 

advertising tool for 6 sheet and A0 poster sizes. It is one of the thinnest outdoor 

light boxes for its size at only 57mm deep this is achieved as the light box utilises 

thin T5 fluorescent tubes for edge-lit illumination. The unit has a lockable frame 

mounted on hinges, enabling quick and easy change of graphics via a special 

key. The front panel of the light box is made from heavyweight toughened glass, 

therefore, to assist opening the box it has the addition of two gas stays. There 

is also an automatic power cut off when opening the unit for extra security and 

safety for when changing graphics or in the event of vandalism. The Scimitar 

light box is the ultimate outdoor advertising medium for illuminated outdoor 

media applications including: petrol station forecourts, car parks, bus shelters, 

railway platforms, concourses, shopping centres, town centres and nightclub 

promotions. 


SCIMITAR 


• Outdoor / indoor use 

• IP66 rated (weatherproof) 

• Security lock 

• Hinging front panel with gas struts 




DIMENSIONS 

vISIbLE SIzE HORIzONTAL: poster size - 27mm 

vERTICAL: postersize - 50mm 

OvERALL SIzE HORIzONTAL: postersize + 143mm 

vERTICAL: postersize +120mm 

STANDARD 

POSTER SIzES 

08456 25 35 45 


PORTRAIT 

6 SHEET 1750mm X 1187mm / A0

Titan 

Titan Display Light Box 






• Cost effective

Titan backlit light boxes are traditional illuminated signs made from high quality 

aluminium profiles making them very robust and durable. They are often used 

for shop fascia signs and can be supplied with a wall bracket making them 

perfect for projection signs too. Made for indoor or outdoor use, they have a 

good level of weather resistance with an IP55 rating. The profiles come in a 

silver anodised finish as standard or they can be powder coated in a range of 

RAL colours. 

Titan light boxes are supplied with either two acrylic front panels, one opal 

diffuser panel and one anti glare panel, to sandwich a print between; or just 

one acrylic opal diffuser panel for applying self-adhesive vinyl graphics. The 

graphics and acrylic panels are kept securely in place by bezels which are 

screw fixed into position. To change the graphics these are simply unscrewed 

allowing the panels and graphics to slide out. 

The Titan light box is available in standard poster sizes including: A3, A2, A1, 

A0, 20” x 30”, 30” x 40” and 40” x 60” or can be custom made to your specific 

size requirements. The light box comes in three depths; the Titan Classic 

light box is just 90mm deep single sided, the Titan Projector is 115mm deep 

double-sided and the Titan Dualcase light box is 168mm deep single sided 

and 176mm deep double sided, the depth depends on size and application. 

TITAN 


• IP55 rated (weather resistant) 



• Cost effective 

• High quality finish 

TITAN 

vISIBLE SIzE poster size - 17mm 

ovERALL SIzE poster size + 17mm 


08456 25 35 45 


STANDARD SIzES A3 / A2 / A1 /A0 / 20” x 30” / 30” x 40” / 40” x 60” 

PoWDER CoATED PRoFILES oN DEMAND

Lucia 

Lucia Panoramic Light Box 


• Curved design 

• Cost saving 


• Price / quality ratio 



• RAL colours available

The Lucia light box has a curved face which gives it an aesthetically pleasing 

panoramic appearance. There are curved, laser cut, aluminium plates on the two 

shorter sides of the light box with aluminium snap frame profiles on the longer 

sides for quick and easy graphic change. A piece of acrylic opal diffuser is fitted 

under tension in a bowed format to create the curved face, and the backlit print 

is placed over the top, with an anti glare front sheet for protection. They can 

be used in portrait, as standard for retail display applications, or in landscape 

format, for applications such as menu light boxes. Lucia light boxes are for indoor 

use and come in a range of standard ‘A sizes’ (A3, A2, A1 & A0); custom sizes 

are also available for quantities. Light box sizes A2 and below utilise a 25mm 

snap frame profile on the two longer sides and for sizes A1 and above a 27mm 

snap frame profile is used. Lucia panoramic light boxes are high quality displays, 

yet they are one of the most cost-effective light boxes available. 

LUCIA 

• Stylish curved face design 


• Easy open click frame to change poster 

• Cost effective 


• Single sided 


25mm PROFILE 27mm PROFILE 

vISIBLE SIzE HORIzONTAL: postersize - 40mm 

vERTICAL = postersize 


HORIzONTAL: postersize - 28mm 

vERTICAL = postersize 

OvERALL SIzE vERTICAL: postersize + 4mm vERTICAL: postersize + 4mm 

STANDARD SIzES A3 / A2 A1 / A0 

08456 25 35 45 


POWDER COATED PROFILES ON DEmAND

Apache 

Apache Totem Light Box 


• Double sided 

• Freestanding 






• Contemporary design

The Apache Illuminated Totem display, also 

known as a light column, is essentially a free 

standing double-sided light box. It holds a 

backlit graphic and a clear anti-glare front 

sheet in place on either side, utilising an easy 

change front loading snap frame system. 

The Apache Totem is internally illuminated with 

opal acrylic panels on both sides which diffuse 

the light evenly across the graphic area; these 

panels are fitted into the vertical profiles in a 

curved format for a panoramic perspective. The 

upright aluminium profiles and the top plate 

are made from anodised aluminium and the 

weighted base is fabricated from steel which 

ensures the totem is very stable. The top and 

base are laser cut and the upright profiles are 

cut by a precision saw for the ultimate quality 

finish. The unit uses TL daylight fluorescent 

tubes, which can be changed easily without 

the need for special tools, and conforms to CE 

electrical standards. 

The Apache Illuminated Totem display is a 

versatile display which is both aesthetically 

pleasing and extremely effective. 

APACHE 

VISIBLE SIZE HORIZONTAL: postersize - 26mm 

VERTICAL = postersize 

OVERALL SIZE VERTICAL: postersize + 15mm 

• Modern curved design 


• Easy open snap frame to change posters 

• Freestanding 


• Double or single sided 


POWDER COATED PROFILES ON DEMAND 

POSTERSIZE 594mm X 1680mm POSTERSIZE 700mm X 2000mm 

VISIBLE SIZE HORIZONTAL: 568mm 

VERTICAL = 1680mm 

HORIZONTAL: 674mm 

VERTICAL = 2000mm 

OVERALL SIZE VERTICAL: 1695mm VERTICAL: 2015mm 

POWDER COATED PROFILES ON DEMAND 


08456 25 35 45 

info@w-co.co.uk

Fabric 

Fabric Face Light Box 

• Frameless design 

• Simple graphic changes 

• Large seamless displays 


• LEDs or fluorescent tubes 






• Modern design

Fabric face light boxes have been developed for large illuminated display 

applications requiring high impact promotional graphics with the added benefits of 

versatility and ease of use. They can be made to gigantic sizes in one continuous 

piece, covering the whole of a shop wall with an illuminated graphic. They can also 

be custom made to go around corners, or to have curved faces for fitting around 

circular columns in-store. 

The fabric face light box has one of the easiest graphic changes available, because 

the fabric print has a silicone rubber strip stitched to the edge which simply pushes 

into a channel around the edges of the aluminium profile. Another advantage of the 

fabric face light box is that it is completely front loading, with no side or rear access 

of the box required to change the graphics or for potential maintenance. This 

means that the light box can be completely recessed into a wall, so it does not take 

up any outer wall space and offers an aesthetically pleasing finish to a shop fit out. 

The material which the graphic is printed on is made from a flexible fabric that 

stretches tight over the face of the light box profile. The high quality graphic is 

printed to the fabric using a dye sublimation process, which allows the inks to 

stretch with the fabric. 

To ensure the optimum level of light distribution across the graphic, the material 

used has high light diffusion properties, which gives one of the most even light 

distributions of any backlit light box. The actual lighting for this illuminated sign is 

backlit and can be generated using either traditional fluorescent tubes or energy 

efficient LEDs. 

The other major benefit is that they are essentially frameless offering a complete 

edge-to-edge illuminated print area, ensuring the promotional graphic has the 

highest impact on the viewing customer. 


FABRIC FACE 

08456 25 35 45 


• Frameless display 


• Quick and easy graphic changes 

• LED or fluorescent tube illumination 

• Can be fully recessed 



Flex Face 

Flex Face Light Box 



• PVC printed skin 


• Fluorescent tubes or LED’s 


• Outdoor use 

• Long life, high quality

FLEX FACE 


• PVC printed skin 


• Outdoor use 


The outdoor Flex Face light box sign system is ideal for larger outdoor illuminated sign applications such as illuminated 

advertising, company signs and shop front signs. Flex Face light boxes are very robust and durable with a 200mm deep 

aluminium profile as standard with internal supporting struts fixed to the back panel to create the rear tray of the light box. 

The internal illumination of the light box can be produced using traditional fluorescent tubes or energy saving LEDs. 

The Flex Face light box is so called because it features a flexible PVC banner fascia which is stretched across the front of 

light box to create what is essentially like a skin on a drum. The PVC banner skin is specifically manufactured for backlit 

applications to allow for the light to pass through and illuminate the banner graphic from edge to edge, although a flex 

frame can be added to the face of the light box if required. 

Flex Face signs can be formed to non-rectangular shapes including circular illuminated signs and even large illuminated 

letters to create completely bespoke illuminated signs. 

Front Bar 

Backlit PVC Skin 

Perimeter Cover Main Body 

Tension Bar 

Internal Support 

Back 

Support

Light Wall 

LED Light Wall 

• Edge-lit LED technology 


• Slimline 

• Large format 



• Indoor / Outdoor use 


• Colour changing LEDs available 

• Modern design

LED LIGHT WALL 

• Edge-lit LED technology 

• Indoor / Outdoor 


• Colour changing LED’s available 


LED light walls are a new and innovative way to illuminate walls in shops or offices, or essentially any large flat surface, 

using edge-lit LED technology; with, or without, the application of large format graphics. These large format LED light 

panels are the perfect solution for shop fitters and architects looking to create large areas of low energy lighting. The LED 

light wall is an ultra thin lighting system, starting from only 30mm in depth, yet it can be manufactured to any size up to 3 

metres x 2 metres in one piece, which can in turn butt together to create super size illuminated walls. 

They are illuminated, as standard, using high bright white LEDs, which are fixed to the edge of a clear acrylic panel. The 

clear acrylic lighting panel has a special pattern of lines etched into the surface to aid the distribution of light evenly over 

the whole area of the panel. These lines are concealed by an opal acrylic diffuser panel which fits over the top; this opal 

panel is also used for additional light diffusion which enables the best possible light distribution, and being frameless, it 

lights up evenly across the whole area from edge-to-edge. The lighting panel and diffuser panel are fitted to an aluminium 

back tray to keep everything securely in place. The LEDs used in the illumination of the light wall are powered by a low 

voltage supply giving substantial energy savings in comparison to traditional lighting. 

The LED light wall can come with a variety of optional 

extras including RGB colour changing LEDs, motion 

sensors, timers and dimmable ballast to enable the 

user to have full control over the lighting effects. The 

structure of the LED light wall can also be modified to suit 

specific requirements, for example, a toughened glass or 

polycarbonate fascia can be added for a more prestigious 

look and additional seals can be fitted in order for it to be 

used outdoors. 

Depth from 30mm 

opal 

diffuser 


08456 25 35 45 


LED light panel 

aluminium 

back tray 

led light panel 

aluminium back tray

Frames 

Aluminium Poster Frames 


• Variety of profiles available 





• Custom sizes available


08456 25 35 45 


POSTER FRAMES 

• Indoor and outdoor use 

• Easy open click frame to change posters 

• Double sided 

Poster Frames are manufactured to the highest quality in a wide range of aluminium profiles. The frames are lightweight, 

robust, simple to use and install. Your poster can be fitted into the aluminium frame in seconds, utilising the poster frame’s 

front loading snap frame system. All standard poster sizes are available and custom made frame sizes can be supplied. 

The Poster Frames come in silver anodised, aluminium finish, as standard with other RAL colours and finishes available 

for quantity orders. 

12 

20MM BEVELLED 

20 

20 

32MM FLAT 

32 

12 

25MM CURVED 

26 

32MM SEMI CURVED 

19 

32 

25MM EXTRA CURVED 

16 

27 

32MM CURVED 

25MM POSTER SNAP 25/32MM TAMPER PROOF CUSTOM MADE 

12 

32

Razor LED Light Box

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?