Classics Folder (Englisch language)

More documents

Recommendations

Info

B/W PROCESSING FILM DEVELOPERS NEOFIN BLUE One shot developer for high resolution negatives. The films‘ speed is fully exploited. Ideal for low / medium speed films. Capacity: 1 bottle = 1-2 films. Pack with 6 glass bottles, each 50 ml conc. for 300-700 ml, Art. No. 100127 ULTRAFIN T-PLUS Fine Grain Developer designed for all B/W films, ideal for T-Grain films, such as Ilford Delta or KODAK T-Max. Well balanced tone reproduction with special differentiation of shadow areas, perfect for push processing. Dilution: 1+4. 0,5 l conc. for up to 30 films, Art. No. 102112. ULTRAFIN Universal one shot developer for all B/W negative films. Dilution variable, depending on the film type and desired negative contrast. Dilution: 1 + 10 up to 1 + 30 0,25 l conc. for up to 20 films, Art. No. 100152 1 l conc. for up to 80 films, Art. No. 100154 PARANOL S Outstanding film developer based on p-Aminophenol with extremely high acutance and high emulsion speed yield. Identical with Agfa Rodinal. The abbreviation “S“ stands for the excellent sharpness of this developer. Ideally suited for low to medium speed B/W negative films. Paranol S is a one-shot-developer and should be mixed to the required volume from concentrate and water only immediately before the developing process. Mixing: 1 part concentrate to 25 or 50 parts water. The dilution varies according to the film material used and required contrast. Agitation: 30 s agitation while continuously moving the developer drum in the first 30 seconds, afterwards agitation every 30 seconds. 0,25 l conc. for up to 25 films 135-36, Art. No. 102106 NEOTENAL LIQUID Fine grain B/W developer for tank and machine processing. Replenishment rate: 300 ml/m 2 resp. 17 ml /135-36. 5 l conc. for 20 l. Art. No. 102176 Use Starter for Neotenal liquid when preparing a fresh working solution. STARTER FOR NEOTENAL LIQUID 1 l conc. for 50 l working solution. Art. No. 100216 PAPER DEVELOPERS EUKOBROM Universal B/W developer for all fibre based and PE papers. Delivers rich blacks and glowing highlights. The developer has exceptionally low fog levels - even with considerably longer developing times. Neutral to cold black image tons. Dilution: 1 + 9. 0,25 l conc. for up to 12,5 m 2 , Art. No. 100294 1 l conc. for up to 50 m 2 , Art. No. 100296 5 l conc. for up to 250m 2 , Art. No. 100298 EUKOBROM AC A new formula without hydroquinone, for all b/w photo papers, baryta as well as PE and PE Vario. Developing in dishes/trays, drums and small desk top developing tanks. Eukobrom AC produces deep blacks with low stain at the same time and thus ensures an excellent contrast. The image tone is neutral black. Dilution 1 + 4 up to 1 + 9. 1 l conc. for max. 40 m 2 (1+9) resp. 25 m² (1+4) Art. No. 100250 VARIOBROM WA A top class Warmtone Developer for all black and white fibre based and RC coated papers. Produces neutral to warmblack image tones with silver bromide papers and warmblack tones with silver chloride papers. Optimally suitable for both dish/tray and machine processing. Variobrom WA gives deep blacks with very low stain at the same time. It is high-yielding and extremely stable. Dish processing: Dilution 1 + 9. Development time at 20°C: RC coated papers 60 - 90 s, fibre based papers 90 - 120 s. Machine processing: Dilution 1 + 7. Development time at 30°C: RC coated papers 30 s, fibre based papers 45 s. Repl. rate 350 ml/m². A stop bath is required between development and fixing, e.g. Tetenal Indicet Art.No. 101045. 1 l conc. up to 50 m 2 , Art. No. 102134 DOKUMOL Special developer for all B/W papers and document films. Produces a very high gradation. Dilution: techn. films: 1+5, Time: 3 - 4 min. Temp.: 20 °C Papers: 1+9, Time: 60 - 90 s PE, 90 - 120 s baryt papers. 1 l conc. up to 50 m 2 , Art. No. 100272 EUKOPRINT VR Modern, very stable and clean working B/W developer for machine processing. VR stands for Variable Replenishment-replenishment rate can be adjusted in a range from 150 ml to 250 ml per m², depending upon individual workload. Eukoprint VR can be replenished on top of any B/W developer for machine processing. Working solution = Replenisher Dilution: 1+4. Differing from this the concentrate is diluted 1+3 when used in Ilford processors 2050/2150 RC. 5 l conc. for 25 l, Art. No. 106887 Neofin Blue, Art. No. 100127 Paranol S Art. No. 102106 Eukoprint VR, Art. No. 106887 Ultrafin T-Plus Art. No. 102112 Ultrafin Art. No. 100152 and Art. No. 100154 Eukobrom Art. No. 100296 Variobrom WA Art. No. 102134 Neotenal liquid Art. No. 102176 Dokumol Art. No. 100272
CREATIVE DESIGN BLACK AND WHITE PHOTOGRAPHIC EMULSION Photosensitive chlorobromide emulsion for coating different surfaces such as glass, ceramics, fabrics, plastics, etc. which can then be exposed. The emulsion corresponds in sensitivity and contrast to grade 3 of Work by Tetenal B/W paper. Capacity: 1,5 - 2 m 2 . 0,25 l bottle, Art. No. 105005 SEPIA TONER Classic toner for all B/W PE and Baryt papers – makes beautiful brown tones, which are configurable, depending on the used paper and gradation. The sepia toning is part of the oldest creative design techniques in the photography, nevertheless this procedure kept his nostalgic attraction to this day. Further aspect: silver sulphide compounds are extremely stable. The sepia toning is an approved procedure to reach an extraordinary archival stability. The pack contents are 500 ml concentrate of bleach and toner to make 2,5 l working solution of each bath. For toning up to a maximum of 10 m² B/W paper. Art. No. 102025 GOLDTONER Goldtoner is a ready-to-use solution for very attractive red-brown to scarlet tones when used after sepia toning with Triponal Toner or Sepia Toner. Goldtoner is a ready-to-use solution with nearly unlimited keeping properties, that can be used several times until achievement of the capacity limit. Without prior sepia toning the image tone of the paper go towards blue-black. This direct application stabilizes the image silver thus making it very resistent against environment influences. Daylight application. 1 l bottle, Art. Nr. 101126 FIXERS Superfix Plus Art. No. 102762 Superfix odourless Art. No. 103067 SUPERFIX PLUS High performance rapid fixer for all B/W papers and films. Suitable for fixing in dishes, drums or machines. Dilution: 1 + 4 up to 1 + 9. Differing from this the concentrate is diluted 1 + 3 when used in Ilford processors 2050/2150 RC. 0,25 l conc. for up to 5 m 2 , Art. No. 102760 1 l conc. for up to 20 m 2 Black and White Photographic Emulsion , Art. No. 102762 Art. No. 105005 5 l conc. for up to 100m 2 , Art. No. 102764 VARIO FIX POWDER Powder fixer for all B/W films and papers. Based on Sodium thiosulphate, contains acid and stabilizing substances. Capacity: up to 2 x 5 m 2 Pack for 2 x 5 l, Art. No. 102483 SUPERFIX odourless Sepia toner, Art. No. 102025 User friendly fixer for all B/W papers and films. Neutral pH, therefore ideal for fibre based paper. Use only in combination with a stop bath like e.g. Indicet. Dilution: 1 + 4. Capacity: up to 10 m 2 1 l conc. Art. No. 103067 ‐ AUXILIARIES FIXING BATH TEST STRIPS For the quick and easy measurement of the silver content and pH value in B&W fixing baths. Use: dip the test strip into the fixing bath, shake off excess liquid and compare the coloured measurement field with the scale on the packaging. Limited use in colour fix and bleach fix baths. Original Macherey-Nagel product. Pack with 100 test strips. Art. No. 101243 INDICET Odourless stop bath with indicator. Comfortable working conditions for those who are sensitive to odour. Contains an indicator, which changes colour (from yellow to purple) when the solution is exhausted. Time: 10 – max. 20 s. Dilution: 1+19. Capacity: ca. 20 m² of PE paper, ca. 10 m² of fibre based paper, till ca. 120 films 135-36. 1 l conc. for up to 20 l. Art. No. 101045 LAVAQUICK Rinse aid for B/W films and papers. Ideally suited for fibre based papers. Reduces the washing time by 50 %. By using Lavaquick, the appearance of stains during the toning of B/W papers is prevented. Dilution: 1 + 19. Capacity: up to 60 m 2 . Time: 120 s. 1 l conc. Art. No. 101070 MIRASOL 2000 ANTISTATIC / GLANZOL Antistatic wetting agent for B/W films. Ideal as glazing agent (Glanzol) for fibre based papers. Dilution: 1 + 400 for films / 1 + 40 for fibre based paper. Capacity: ca. 100 films 135-36 resp. ca. 5 m² paper per litre working solution. 0,25 l conc. Art. No. 101080 HÄRTER liquid Hardener additive for all liquid fixers and stop baths. Add to ready-to-use solutions: Fotographic films and papers: 25 ml / litre X-ray films: 30 ml / litre Graphic films and papers: 25 ml / litre 1 l conc. Art. No. 101038 VARNISHES LIGHT PROTECTING VARNISH SPRAY Transparent and rapidly drying special varnish for the protection of dyes and print surfaces. Protects against dye fading of colour prints. Also suitable to reduce/eliminate scratches on films. Yield: ca. 1,6 m². 400 ml can. Glossy. Art. No. 105190 CAMERA VARNISH SPRAY Deep matte micro-pigmented special purpose varnish for matting and retouching of cameras, lens tubes, projectors, optical devices, etc. Another application is the coating of measuring devices, scales, experimental set ups, etc that require totally nonreflective surfaces. 200 ml can. Art. No. 105202 Goldtoner Art. No. 101126 Indicet Art. No. 101045 Fixing bath test strips, Art. No. 101243 Lavaquick Art. No. 101070 Camera Varnish Spray Art. No. 105202 Mirasol 2000 Art. No. 101080 Adhesive Super Spray Art. No. 102016
Page 1 and 2: www.tetenal.com shop.tetenal.de Wel
Page 3: B/W PHOTOPAPER WORK B/W PAPER Work

Classics Folder (Englisch language)

Create successful ePaper yourself

Delete template?

Save as template?