Ansoft Q3D Extractor

More documents

Recommendations

Info

Design Verification List � Traces have to have Differential Impedance of 100 ohms If not, fix it � Report the findings back to management � If there are any improvements that could be made to optimize the package, present suggestions � Spice sub-circuit has to be generated for the ASIC company to perform system level simulations at 100ps risetimes � Parasitic characterization has to be performed for every net on the package � Spice subcircuit for the traces has to be generated
The Tools Needed to Perform � Joe is armed with… � <strong>Ansoft</strong>links 2.2 � Spicelink 5.0 with PEEC � Optimetrics 2.5 � TPA 4.0 the Task
Page 1 and 2: High-Performance High Performance P
Page 3 and 4: The Scenario � A big ASIC design
Page 5: ~~ ~~ ~~ ~~ ~~~~ ~~~~ ~~ ~~ Joe Eng
Page 9 and 10: The Ansoft Solution: Ansoft Q2D Ext
Page 11 and 12: The Ansoft Solution: Ansoft 2D Extr
Page 13 and 14: The Ansoft Solution � Joe has com
Page 15 and 16: The Ansoft Solution: Return Path
Page 17 and 18: The Ansoft Solution: Ansoft Optimet
Page 19 and 20: The Ansoft Solution: Ansoft Optimet
Page 27 and 28: The Ansoft Solution: Ansoft TPA 4.0
Page 29 and 30: Ansoft Q3D Extractor � After the

Ansoft Q3D Extractor

Create successful ePaper yourself

Delete template?

Save as template?