Imaging Chemicals & Paper Catalogue

Black and White Film Processing
B/W Negative developer for drums and tanks
Pack for Art. No. € net
NEOFIN BLUE
One-shot developer for negatives with the highest resolution and exceptional sharpness. The films speed is fully exploited.
Ideal for slow/medium speed films.
Capacity per 500 ml: 1 - 2 films 135-36 6 x 50 ml each for 300 - 700 ml 100127 13,30
ULTRAFIN
Universal one-shot developer for all B/W negative films, producing an excellent speed yield, fine grain and great resolution. Dilution
variable 1+10 up to 1+30 depending upon required contrast and film emulsion.
0,25 l conc for up to 20 films 135-36 100152 9,84
1 l conc for up to 80 films 135-36 100154 18,36
ULTRAFIN T-PLUS
Fine Grain Developer designed for all B/W films, ideal for T-Grain films, such as Ilford Delta or Kodak T-Max. Well balanced tone reproduction
with special differentiation of shadow areas.
Dilution: 1 + 4
0,5 l conc. for up to 30 films 135-36 102112 15,03
PARANOL S
Outstanding film developer based on p-Aminophenol with extremely high acutance and high emulsion speed yield. Comparable with
Agfa Rodinal. The abbreviation “S“ stands for the excellent sharpness of this developer. Ideally suited for low to medium speed B/W
negative films.
Paranol S is a one shot developer and should be mixed to the required volume from concentrate and water only immediately before the
developing process.
Mixing: 1 part concentrate to 25 or 50 parts water. The dilution varies according to the film material used and required contrast.
Agitation: 30 s agitation while continuously moving the developer drum in the first 30 seconds, afterwards agitation every 30 seconds .
0,25 l conc. for max. 25 films 135-36 102106 5,51
B/W Negative developer for tanks and machines
NEOTENAL LIQUID
Fine grain b/w developer for tank and machine processing.
Replenishment rate: 270 - 300 ml/m 2 . Use starter for Neotenal liquid when preparing a fresh working solution.
Dilution: 1 + 5 (working solution), 1 + 3 (replenisher) 5 l conc. for 20 l 102176 66,06
STARTER FOR NEOTENAL LIQUID
For preparing fresh working solution of NEOTENAL 1 l conc. for 50 l working solution 100216 21,59
Micro Standard Processing
Ready-to-use solutions for the standard processing of microfilms. They are designed for processing times from 8-30 sec at temperatures
of 20-40°C and generate high film speeds and yield. MICROTENAL G and MICROFIX G G can be processed in all machines, that are
suitable for standard processing. The capacity per liter ready-to-use solution is 10 m² microfilm.
We recommend to use 100-150 ml replenisher per m² microfilm in processing machines with replenishment facilities.
MICROTENAL G Developer 5 l ready-to-use solution 106211 20,02
Recommendation for starter: Temperature 30 °C, Time 20 s, Repl. Rate 300 ml/m²
MICROFIX G Fixer 5 l ready-to-use solution 106210 14,55
Recommendation for starter: Temperature 30 °C, Time 20 s, Repl. Rate 300 ml/m²
32