GME Supply Catalog Version 19.1

TOOLS \\ TOOL TETHERS
TY-FLOT QUICK-SWITCH STARTER KIT 2
Kit includes (2) docks, (2) wrist straps, (2) switches. Helps eliminate injuries to the user
as a result of dropped tools on swinging tethers or retractors. Allows the use of multiple
tools at one time without entanglement. Interchangeable from hand to hand in seconds
while maintaining positive control. Screw gate carabiner.
QS2 - $84.99
TY-FLOT BUNGEE
TOOL TETHER
Keeps your tools attached so you
can work without a drop hazard.
Comes equipped with two,
lightweight aluminum carabiners
and can safely hold the weight of
a tool up to 5 lbs. Save yourself
the worry of dropping a tool with
the economical Ty-Flot Tool Tether.
BNGEXTCCAL - $12.99
TY-FLOT QUICK-SWITCH BOLT BAG & TOOL HOLDER
Contain bolts with two closing actions. Drawstring, d-ring, and snap hook. Made from
ballistic nylon. 100% tool retention during tool transfer from docks. Side d-rings for tool
tether attachment. Wear on belt or attach to a rail. 6 lbs maximum tool weight per dock.
QSBOLT - $94.99
TY-FLOT 100
LB RATED TOOL
BUCKET WITH
TRIPLE LOCK
CARABINER
Diameter 15”, Depth 19” , with an
extra 8” for longer tools. Made from
ballistic nylon with leather crack
prevention bottom and leather
handle wear points. Reflective
striping. Aluminum Gate Carabiner
with triple locking with capture pin.
TB1219100BZ - $119.99
TY-FLOT TOOL COLLAR & LOOP
Tool tethering system that doesn’t limit the full functionality of the tool. Mounts on the
shaft allowing full use of the butt end. 360° mobility preventing tether entanglement. Fits
a wide range of screw drivers and other tools (i.e. chisels, punches, pliers, pens, pencils,
pry bars and more). Flexible collar allows quick installation. Tether loops can also be
used for vise grips. Diameters ranging from .035” to 1.84” with weight ratings up to 6
lbs available at www.gmesupply.com.
TKIT1316 0.13” - 0.16”, 0.75 lbs max tool weight - $3.75
TKIT2026 0.20” - 0.26”, 1.25 lbs max tool weight - $4.75
TKIT5560 0.55” - 0.60”, 1.5 lbs max tool weight - $6.75
TKIT7284 0.72” - 0.84”, 3 lbs max tool weight - $9.75
TKIT96109 0.96” - 1.09”, 5 lbs max tool weight - $11.50
TKIT161184 1.61” - 1.84”, 6 lbs max tool weight - $14.50
TY-FLOT PPE
CADDY GLOVE
HOLDER WITH
POUCH
Keeps gloves, earplugs,
and safety glasses at
arm’s reach. Reduces cost
of lost PPE. Attaches to
any convenient location..
PPECPOR - $3.49
TY-FLOT COLD SHRINK ATTACHMENT
10-pack. This is a great way to make a lasting attachment on your tool without the need
of a heat gun. Stronghold cold shrink comes in multiple sizes to fit a variety of your tools. A
small amount of friction tape, a short roll is included in each pack, may be necessary to add
geometry to your tool in order to properly install a cold shrink device.
COLDSH1X2 1” x 2”, fits tool diameters 0.39” - 0.63”, 1.5 lbs weight
rating - $123.99
COLDSH14X225 1.4” x 2.25”, fits tool diameters 0.45” - 1.02”, 1.5 lbs
weight rating - $149.99
COLDSH16X25 1.6” x 2.5”, fits tool diameters 0.55” - 1.18”, 3 lbs weight
rating - $159.99
COLDSH21X275 2.1” x 2.75”, fits tool diameters 0.75” - 1.65”, 4 lbs
weight rating - $219.99
216 GMESUPPLY.COM