innovations in lifting - Krah GmbH

Lift System
Model 2080 / 4160
Lifting units
� The hydraulic cylinders are mounted
on a solid steel platform supported
with stiffeners
� 4 steel wheels with tapered roller
bearings on each lifting unit
� Cylinders two stage double acting
with pipe fracture safety valves
� 2x 15 meter dual hydraulic hoses
to connect the lifting units to the
power aggregat
� Weight per each lifting unit
approx. 1.300 kg
2.445
Technical Specification
Load chart Model 2080 / 4160
Stage Lifting height Capacity (approx.)
2-point-system 4-point-system
2. Stage 5.765 mm 40.000 kg 80.000 kg
1. Stage 4.060 mm 70.000 kg 140.000 kg
Retracted base height 2.445 mm
Rail top edge 0 mm
Hydraulic power unit
� 190 l oil tank (2 Lifting units) or
380 l oil tank (4 Lifting units),
motor/pump combination with direct
manual controls. pressure gauges
and oil filters
� 380/400 Volt electric motor, 16 A
� Weight per aggregat (at 190 l)
approx. 820 kg incl. oil
Propel cylinder
� 1 pair of cylinders with a stroke of approx.
950 mm, cylinders detachable, with
attachement included
1.197
762
1.524 914
Planetary power drive
� Detachable, hydrostatic drive,
to provide continuous propel
for long distance travel
Optional
� Laser height measurement,
pressure control for each lift cylinder
� Equal lift system C.A.R.L.
(Computer Assisted Remote Lift).
� Integral Drive Option
All dimensions in mm.
Dimensions and weights
are subject to modifications.
Capacity of lifting beams are not
considered and must be calculated by the
operator or a professional engineer. Beams
must be capable of handling the load,
including safety factors.
KRAH GmbH · Lift Systems Sales · 74629 Pfedelbach/Germany · Tel. +49 (0) 7941 8325 · Fax +49 (0) 7941 37994 · www.lift-systems.de · e-mail: krah@lift-systems.de
I.11.2008.LS.E © Krah Gmbh 2008 Reproduction, also partly, only granted with permission.