Eternity
A selection of the finest natural marbles is transformed into surfaces of porcelain stoneware and thin laminated porcelain stoneware that are durable and versatile. Eternity has a wide range of sizes and decors, where the refined Soft and Lux finishes enhance the richness and variety of the veins, expertly calibrated to give to every environment continuity of textures and harmonic shades of great value.
A selection of the finest natural marbles is transformed into surfaces of porcelain stoneware and thin laminated porcelain stoneware that are durable and versatile.
Eternity has a wide range of sizes and decors, where the refined Soft and Lux finishes enhance the richness and variety of the veins, expertly calibrated to give to every environment continuity of textures and harmonic shades of great value.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Eternity</strong> 0.3<br />
<strong>Eternity</strong><br />
CARATTERISTICHE TECNICHE - TECHNICAL FEATURES<br />
GRES PORCELLANATO LAMINATO - LAMINATED PORCELAIN STONEWARE<br />
ISO 13006-G (Gruppo / Group BІa-UGL) • EN 14411-G (Gruppo / Group BІa-UGL) • ANSI A137.3 (Back layered gauged porcelain slabs - UGL)<br />
CARATTERISTICHE TECNICHE - TECHNICAL FEATURES<br />
GRES A MASSA COLORATA - COLOURED-BODY STONEWARE<br />
ISO 13006-G (Gruppo / Group BІa-UGL) • EN 14411-G (Gruppo / Group BІa-UGL) • ANSI A137.1 - UGL (P1 CLASS - PORCELAIN TILES)<br />
CARATTERISTICA TECNICA<br />
TECHNICAL FEATURES<br />
METODO DI PROVA<br />
TEST METHOD<br />
REQUISITI PRESCRITTI<br />
REQUIRED VALUES<br />
VALORI MEDI<br />
AVERAGE VALUES<br />
6 mm<br />
CARATTERISTICA TECNICA<br />
TECHNICAL FEATURES<br />
METODO DI PROVA<br />
TEST METHOD<br />
REQUISITI PRESCRITTI<br />
REQUIRED VALUES<br />
VALORI MEDI<br />
AVERAGE VALUES<br />
ASSORBIMENTO D’ACQUA<br />
WATER ABSORPTION<br />
ISO 10545-3 ≤ 0,5% 0,1%<br />
ASTM C373<br />
ASSORBIMENTO D’ACQUA<br />
WATER ABSORPTION<br />
ISO 10545-3 ≤ 0,5% 0,05%<br />
ASTM C373<br />
RESISTENZA ALLA FLESSIONE<br />
MODULUS OF RUPTURE<br />
ISO 10545-4 ≥ 35 N/mm 2 50 N/mm 2<br />
ASTM C1505 ≥ 6000 PSI ≥ 6000 PSI<br />
SFORZO DI ROTTURA (S)<br />
BREAKING STRENGTH<br />
ISO 10545-4 ≥ 1300 N 2500 N 10 mm<br />
ASTM C648 ≥ 250 lbf 600 lbf 10 mm<br />
RESISTENZA ALL’ABRASIONE PROFONDA<br />
DEEP ABRASION RESISTANCE<br />
ISO 10545-6 ≤ 175 mm 3 Conforme / Compliant<br />
ASTM C1243<br />
RESISTENZA ALLA FLESSIONE<br />
MODULUS OF RUPTURE<br />
ISO 10545-4 ≥ 35 N/mm 2 50 N/mm 2<br />
DILATAZIONE TERMICA LINEARE<br />
LINEAR THERMAL EXPANSION<br />
ISO 10545-8<br />
Requisito non previsto<br />
α ≤ 7 x 10 -6 °C -1<br />
No provision<br />
ASTM C372 α ≤ 4.4 x 10 -6 °F -1 / α ≤ 8 x 10 -6 °C -1<br />
RESISTENZA ALL’ABRASIONE PROFONDA<br />
DEEP ABRASION RESISTANCE<br />
ISO 10545-6 ≤ 175 mm 3 145 mm 3<br />
ASTM C1243<br />
RESISTENZA ALLE MACCHIE<br />
STAIN RESISTANCE<br />
ISO 10545-14 Classe / Class 3 Min. 5 RESISTENTE / RESISTANT Soft<br />
≥ 3 Lux<br />
DILATAZIONE TERMICA LINEARE<br />
LINEAR THERMAL EXPANSION<br />
ISO 10545-8<br />
Requisito non previsto<br />
α ≤ 7 x 10 -6 °C -1<br />
No provision<br />
ASTM C372 α ≤ 4.4 x 10 -6 °F -1 / α ≤ 8 x 10 -6 °C -1<br />
ASTM C1378 As indicated by manufacturer CLASS A RESISTANT Soft<br />
CLASS C Lux<br />
RESISTENZA ALLE MACCHIE<br />
STAIN RESISTANCE<br />
ISO 10545-14 Classe / Class 3 Min. 5 RESISTENTE / RESISTANT Soft<br />
≥ 3 Lux<br />
RESISTENZA ALL’ATTACCO CHIMICO (*)<br />
ISO 10545-13 Come indicato dal produttore<br />
CHEMICAL RESISTANCE (*) As indicated by manufacturer<br />
RESISTENZA AL GELO<br />
FROST RESISTANCE<br />
RESISTENZA ALLO SCIVOLAMENTO<br />
SLIP RESISTANCE<br />
STONALIZZAZIONE<br />
SHADE VARIATION<br />
REAZIONE AL FUOCO<br />
FIRE REACTION<br />
ASTM C650<br />
LA-HA RESISTENTE / RESISTANT Soft<br />
LB-HB Lux<br />
CLASS A RESISTANT Soft<br />
CLASS C Lux<br />
ISO 10545-12 Nessuna alterazione / No alteration RESISTENTE / RESISTANT<br />
ASTM C1026 As indicated by manufacturer RESISTANT<br />
ANSI A326.3 - DCOF ≥ 0.42 Soft<br />
ANSI A137.3<br />
EN 13823<br />
EN 9239-1<br />
Come indicato dal produttore<br />
As indicated by manufacturer<br />
CPR (UE) 305/2011, 2000/147/CE,<br />
UNI EN 13501-1<br />
FLAME SPREAD ASTM E84 Class A<br />
CONDUCIBILITA’ TERMICA<br />
THERMAL CONDUCTIVITY<br />
SPESSORE<br />
THICKNESS<br />
V2 Variazioni minime<br />
Slight variation<br />
Classe / Class A1 (parete / wall)<br />
Classe / Class A1 fl (pavimento / floor)<br />
EN 12524 - λ = 1,3 W/m °K / 0.7 BTU/ft h °F<br />
FORMATI / SIZES<br />
120x260 cm - 48”x102” - 6 mm<br />
120x120 cm - 48”x48” - 6 mm<br />
ASTM C1378 As indicated by manufacturer CLASS A RESISTANT Soft<br />
CLASS C Lux<br />
RESISTENZA ALL’ATTACCO CHIMICO (*)<br />
ISO 10545-13 Come indicato dal produttore<br />
LA-HA RESISTENTE / RESISTANT<br />
CHEMICAL RESISTANCE (*) As indicated by manufacturer<br />
ASTM C650<br />
A RESISTANT<br />
RESISTENZA AL GELO<br />
FROST RESISTANCE<br />
RESISTENZA ALLO SCIVOLAMENTO<br />
SLIP RESISTANCE<br />
STONALIZZAZIONE<br />
SHADE VARIATION<br />
REAZIONE AL FUOCO<br />
FIRE REACTION<br />
ISO 10545-12 Nessuna alterazione / No alteration RESISTENTE / RESISTANT<br />
ASTM C1026 As indicated by manufacturer RESISTANT<br />
ANSI A326.3 - DCOF ≥ 0.42 Soft<br />
ANSI A137.1<br />
EN 13823<br />
EN 9239-1<br />
Come indicato dal produttore<br />
As indicated by manufacturer<br />
CPR (UE) 305/2011, 2000/147/CE,<br />
UNI EN 13501-1<br />
V2 Variazioni minime<br />
Slight variation<br />
Classe / Class A1 (parete / wall)<br />
Classe / Class A1 fl (pavimento / floor)<br />
FLAME SPREAD ASTM E84 Class A<br />
CONDUCIBILITA’ TERMICA<br />
EN 12524 - λ = 1,3 W/m °K / 0.7 BTU/ft h °F<br />
THERMAL CONDUCTIVITY<br />
FUGA MINIMA CONSIGLIATA (**)<br />
RECT (indoor) - 2 mm<br />
RECOMMENDED MINIMUM JOINT (**)<br />
SPESSORE<br />
THICKNESS<br />
FORMATI / SIZES<br />
60x120 cm - 24"x48" - 10 mm<br />
60x60 cm - 24"x24" -<br />
FUGA MINIMA CONSIGLIATA: vedi Manuale Tecnico ZER0.3 - MINIMUM SUGGESTED JOINT: refer to ZER0.3 Technical Manual<br />
(*) Ad esclusione dell’acido fluoridrico e derivati - Excluding hydrofluoric acid and its derivatives<br />
30x60 cm - 12"x24" -<br />
(*) Ad esclusione dell’acido fluoridrico e derivati - Excluding hydrofluoric acid and its derivatives<br />
(**) Salvo diversa indicazione dei Codici di Posa Nazionali. La larghezza delle fughe deve comunque essere decisa dalla Direzione Lavori<br />
The width of grout joints must be established by the installation supervisor, unless grout widths are regulated by national laying standards<br />
76 77
Change language