RUKO - Catalogue - Precision Tools - 2017 (EN)

More documents

Recommendations

Info

RUKO gmbh Company history RUKO Ohg was founded in November 1974 in Böblingen. It was reorganised into RUKO gmbh Precision Tools in July 1980. At this time it also concentrated its activities on the manufacture of drilling and cutting tools. Since November 1990 the headquarters of RUKO gmbh have been in holzgerlingen (near Stuttgart). The modern building has a useful floor space of around 6800 m². Around 1300 m² of this is head office space, 2400 m² is production space and 3100 m² stores. The 28 fully-automated CNC grinding machines in holzgerlingen used in production permit maxi-mum precision in the manufacture of drills and cutters. This means that RUKO currently has one of the most up-todate production methods in Europe. The building in Kyjov has a useful floor space of around 3000 m². 1000 m² of this is office space for the head office and 2000 m² is production space. The 15 CNC grinding machines used in production permit maximum precision in the manufacture of twist drills and threadcutting tools. Quality as standard The established RUKO quality has been confirmed once again with the dIN EN ISO 9001:2008 certificate for 2013-2016. The RUKO quality system was first tested and certified according to dIN EN ISO 9001, the highest level of accreditation, in January 1998. The dIN EN ISO 9001 system is based on not only perfect product quality, but also an integral quality concept in all corporate divisions. Innovative strength, reliability and quality matched to the requirements of industry and craftsmen are the hallmarks of our corporate philosophy. The special attention of the 120 employees in holzgerlingen is aimed at our customers, because satisfied customers make us successful! 4 PRECISION TOOLS
Page 1 and 2: PRECISION TOOLS catalogue 2016/17
Page 3: “AS A MANUfACTURER Of hIgh-gRAdE
Page 8: Competence worldwide Distribution O
Page 11 and 12: Section directory 05. Taper and deb
Page 13 and 14: Section directory 11. Saw program P
Page 15 and 16: Twist DRILLS
Page 17 and 18: Overview of symbols 01 DIN 333 Cent
Page 19 and 20: Point cuts in accordance with dIN 1
Page 21 and 22: Steel (N/mm2) < 900 Steel (N/mm2) <
Page 27 and 28: Ø mm L1 mm L2 mm 4,50 80,0 47,0 28
Page 29 and 30: DIN 338 • VA
Page 31 and 32: DIN HSSE 338 FO Co 5 5 x D ≥ Ø 2
Page 35 and 36: DIN 338 • UTL 3000
Page 37 and 38: DIN HSSE 338 VA Co 5 5 x D ≥ Ø 2
Page 41 and 42: DIN HSSE 338 VA Co 5 5 x D ≥ Ø 2
Page 43 and 44: DIN 338 • UNI
Page 45 and 46: Ø mm L1 mm L2 mm HSS HSS HSS 5,00
Page 47 and 48: DIN 338 TURBO HSS 5 x D N 36° h8
Page 49 and 50: DIN 338 N HSS 5 x D ≥ Ø 2,0 mm 1
Page 51 and 52: Ø mm L1 mm L2 mm HSS HSS HSS 9,25
Page 53 and 54: DIN 338 N HSS 5 x D 118° 25-30° N
Page 55 and 56:
DIN 338 HSS-R HSS-G HSSE Co 5 N N V
Page 57 and 58:
Ø mm L1 mm L2 mm HSS-R 7,10 109,0
Page 59 and 60:
DIN 338 N TC 5 x D 118° 20-30° C
Page 61 and 62:
DIN 338 N TC 5 x D 120° 25-30° Tw
Page 63 and 64:
DIN 338 UTL 3000 HSSE Co 5 5 x D 13
Page 65 and 66:
DIN 338 N HSS-G 5 x D ≥ Ø 2,0 mm
Page 67 and 68:
Ø mm L1 mm L2 mm 6,40 148,0 97,0 2
Page 69 and 70:
Ø mm L1 mm L2 mm 6,40 148,0 97,0 2
Page 71 and 72:
DIN 1869 • TL 3000
Page 73 and 74:
Ø1 mm L1 mm L2 mm HSS 30,00 296,0
Page 75 and 76:
Ø mm L1 mm L2 mm 7,50 74,0 34,0 28
Page 77 and 78:
Ø mm L1 mm L2 mm 6,00 66,0 28,0 20
Page 79 and 80:
Ø mm L1 mm L2 mm 5,00 62,0 26,0 20
Page 81 and 82:
KV HSS-G ≥ Ø 3,0 mm 130° 25-30
Page 83 and 84:
N HSS-G ≥ Ø 3,0 mm 118° 25-30°
Page 85 and 86:
Table of cutting speeds for twist d
Page 87 and 88:
SPECIAL dRILLS
Page 89 and 90:
Overview of symbols 02 HSS high-spe
Page 91 and 92:
Steel (N/mm2) < 900 Steel (N/mm2) <
Page 93 and 94:
DIN 1897 HSSE Co 5 25° 180° h8 Ø
Page 95 and 96:
Table of cutting speeds for special
Page 97 and 98:
TUBE AND SHEET DRILLS
Page 99 and 100:
Page 101 and 102:
HSS HSSE Co 5 C 118° 20-30° Ø2
Page 103 and 104:
HSS C 118° 20-30° Tube and sheet
Page 105 and 106:
STEP DRILLS
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
HSS HSSE Co 5 C 118° 90° 04 Step
Page 113 and 114:
HSS HSSE Co 5 C 118° 90° Ø2 Ø1
Page 115 and 116:
HSS C 118° 90° Ø2 Ø1 04 Step dr
Page 117 and 118:
Table of application for step drill
Page 119 and 120:
TAPER AND DEBURRING COUNTERSINKERS
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
HSS HSSE Co 5 TC C DIN 335 90° 05
Page 129 and 130:
ASP DIN 335 C 90° Ø2 Ø1 05 Taper
Page 131 and 132:
HSS C HSSE DIN Co 5 335 90° 05 Tap
Page 133 and 134:
HSS DIN 335 D 90° Ø2 Ø1 05 Taper
Page 135 and 136:
HSS C 75° Ø2 Ø1 05 Taper and deb
Page 137 and 138:
HSS C 60° Ø2 05 Taper and deburri
Page 139 and 140:
HSS C 82° Ø2 Ø1 05 Taper and deb
Page 141 and 142:
HSS 90° Ø2 Ø1 05 Taper and debur
Page 143 and 144:
HSS 180° Ø2 Ø1 05 flat countersi
Page 145 and 146:
HSS DIN 373 180° 05 flat countersi
Page 147 and 148:
HSS N 118° h8 Ø2 Ø1 05 L3 Sublan
Page 149 and 150:
Table of recommended cutting speeds
Page 151 and 152:
THREAD-CUTTING TOOLS
Page 153 and 154:
Page 156 and 157:
06 Parts and applications overview:
Page 158 and 159:
06 HSS M HSSE DIN Co 5 352 60° ISO
Page 160 and 161:
HSS DIN 800 MF 2181 N/mm² 06 60°
Page 162 and 163:
HSS G DIN 800 (BSP) Rp 5157 N/mm²
Page 164 and 165:
06 HSS UNC DIN 352 800 N/mm² 60°
Page 166 and 167:
06 HSS M HSSE DIN Co 5 352 60° ISO
Page 168 and 169:
06 HSS M B DIN HSSE Co 5 352 60° I
Page 170 and 171:
06 HSS G (BSP) Rp B DIN 5157 800 N/
Page 172 and 173:
06 die stocks as per dIN 225 for cl
Page 174 and 175:
06 Thread-cutting tools To cut an i
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
06 Product information for machine
Page 182 and 183:
06 HSS M HSSE Co 5 B DIN 371 60° I
Page 184 and 185:
06 HSS M HSSE Co 5 B DIN 376 60° I
Page 186 and 187:
06 HSS M DIN HSSE Co 5 371/376 60°
Page 188 and 189:
06 HSS M B DIN 371/376 AZ 60° ISO2
Page 190:
06 HSSE Co 5 G (BSP) Rp DIN 5156 55
Page 193 and 194:
HSSE Co 5 MF C DIN 374 60° ISO2 6H
Page 195 and 196:
HSSE DIN Co 5 UNC 2B C 2182/2183 60
Page 197 and 198:
HSSE DIN Co 5 UNF 2B C 2182/2183 60
Page 199 and 200:
HSSE Co 5 M D DIN 2174 60° ISO2 6H
Page 201 and 202:
HSS M60° ISO2 6H 06 Combined machi
Page 203 and 204:
06 PRECISION TOOLS 203
Page 205 and 206:
Thread repair TOOL
Page 207 and 208:
Overview of symbols 07 HSS M height
Page 209 and 210:
ProCoil Thread repairing assortment
Page 211 and 212:
DIN 338 N HSS 5 x D ≥ Ø 2,0 mm 1
Page 213 and 214:
CORE DRILLS
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
HSS 30,0 mm RS5e / RS10 / RS25e / R
Page 221 and 222:
HSS HSSE Co 5 30,0 mm RS5e / RS10 /
Page 223 and 224:
HSS 110,0 mm RS125e / RS126e RS140e
Page 225 and 226:
The cutting edge is the important t
Page 227 and 228:
TC 50,0 mm RS10 / RS25e / RS40e RS1
Page 229 and 230:
Ø1 mm Ø2 mm L1 mm Cutting depth m
Page 231 and 232:
Ø1 mm Ø2 mm L1 mm Cutting depth m
Page 233 and 234:
Ejector pins for core drills Packin
Page 235 and 236:
Recommended cutting speeds for tung
Page 237 and 238:
ROTARY BURRS
Page 239 and 240:
Overview of symbols 09 TC Tungsten
Page 241 and 242:
09 für / for ALU PRECISION TOOLS 2
Page 243 and 244:
TC C WRC Ø1 09 Tungsten carbide ro
Page 245 and 246:
TC G SPG Ø1 09 Tungsten carbide ro
Page 247 and 248:
TC CT 4 L KEL Ø1 09 Tungsten carbi
Page 249 and 250:
TC 09 Sets of tungsten carbide rota
Page 251 and 252:
TC CT 4 09 Sets of tungsten carbide
Page 253 and 254:
Table of recommended cutting speeds
Page 255 and 256:
kg 25.000 r.p.m Ø 6.0 mm 113 l / m
Page 257 and 258:
TC kg 25.000 r.p.m Ø 6.0 mm 113 l
Page 259 and 260:
HOLE SAWS
Page 261 and 262:
Page 263 and 264:
HSS 2,5 - 5,0 mm 5,0 mm Ø1 10 hSS
Page 265 and 266:
TC 4,0 mm 10,0 mm TC 10 Set of tun
Page 267 and 268:
Arbor holders for tungsten carbide
Page 269 and 270:
HSS HSSE Co 8 Bi Metall 38,0 mm Bi-
Page 271 and 272:
HSS HSSE Co 8 Bi Metall 38,0 mm HSS
Page 273 and 274:
Recommended cutting speeds for tung
Page 275 and 276:
SAW PROGRAM
Page 277 and 278:
Overview of symbols 11 Steel, iron
Page 279 and 280:
T-shank jig-saw blades for power to
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Jig-saw blades for pneumatic body s
Page 289 and 290:
Reciprocating blades for power tool
Page 291 and 292:
Reciprocating blades demolition for
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Reciprocating blades for power tool
Page 299 and 300:
Reference table for RUKO reciprocat
Page 301 and 302:
DEBURRING PROGRAM
Page 303 and 304:
Application table 12 Alloyed steel
Page 305 and 306:
HSS 12 D Unigrat „Blade d" Packin
Page 307 and 308:
HSS 12 groove deburrer set “N”
Page 309 and 310:
SCREW-HOLE PUNCHES
Page 311 and 312:
13 Recommendations for the use of s
Page 314 and 315:
13 MF 4,0 mm Sets of screw-hole pu
Page 316:
13 Set of foot-operated hydraulic p
Page 319 and 320:
Coolants and LUBRICANTS
Page 321 and 322:
Cutting pastes high performance cut
Page 323 and 324:
CONCRETE DRILLS
Page 325 and 326:
Overview of symbols 15 right hand c
Page 327 and 328:
Plus ® 130° 15 SdS-plus hammer dr
Page 329 and 330:
Plus ® 15 SdS-plus hammer drill se
Page 331 and 332:
130° DIN 8039 ISO 5468 TC Ø 15 Co
Page 333 and 334:
130° DIN 8039 ISO 5468 TC Ø 15 Pe
Page 335 and 336:
TC Ø 15 Universal drills with carb
Page 337 and 338:
Plus Max 15 SdS-plus and SdS-max ch
Page 339 and 340:
WOOD DRILLS
Page 341 and 342:
Overview of symbols 16 right hand c
Page 343 and 344:
Ø 16 Twist augers - chrome vanadiu
Page 345 and 346:
List of article numbers Article no.
Page 347 and 348:
PRECISION TOOLS 347
show all

RUKO - Catalogue - Precision Tools - 2017 (EN)

Create successful ePaper yourself

Delete template?

Save as template?