Fixman

Desk Staples 5000pk
Clips
Open End Flange Head Blind
Rivets 150pk
Hose Clips 10pk
Strong, galvanised wire with sharp points for excellent
penetration and top performance. 6mm leg length staples
up to 30 sheets. Suitable for Rexel, Rapid, Leitz, Novus,
Esselte, Arrow, Stanley and other branded staplers.
CODE DESCRIPTION
610504 12.8 x 6mm (26/6)
343711 12.8 x 6mm (24/6)
Type 90 Staples 5000pk
Heavy duty, narrow, 5.8mm crown staples. Compatible with
Silverline Air Nailer Staplers (32mm and 50mm) and will fit
all type 90 narrow-crown staplers, including Tacwise, Makita,
Senco and Sacrofast. Equivalent to Tacwise 90, Rapid No.90,
Makita type 90 and Clarke type 90 staples. Specifications:
18ga (5.7±0.1) x (1.25±0.02) x (1.0±0.01) 1.17mm wire.
CODE DESCRIPTION
715197 5.85 x 10 x 1.25mm
471953 5.85 x 13 x 1.25mm
947082 5.85 x 16 x 1.25mm
745408 5.85 x 19 x 1.25mm
312861 5.85 x 22 x 1.25mm
331428 5.85 x 25 x 1.25mm
Panel Pin 1/4kg
Pins
Steel, round, lightweight nail used for cabinet-making and
for fixing small mouldings into place.
CODE DESCRIPTION
364137 20 x 1.6mm
792889 25 x 1.6mm
527229 30 x 1.6mm
763936 40 x 1.6mm
Ideal fixing for flexible rubber hose, plastic hose and flexible
pipes. Used in gardens, workshops and garages where an air
or water-tight seal is required. Slotted 1/4” hex drive.
CODE DESCRIPTION
304122 9.5 - 12mm (OOO)
721879 10-16mm (MOO)
449926 12 - 20mm (OO)
625821 16 - 22mm (O)
734117 18 - 25mm (OX)
578018 22 - 30mm (1A)
530408 25 - 35mm (1)
860005 30 - 40mm (1X)
803617 32 - 45mm (1M)
354080 35 - 50mm (2A)
531438 40 - 55mm (2)
492528 45 - 60mm (2X)
838347 55 - 70mm (3)
Rivets
Open End Dome Head Blind Rivets
Aluminium mechanical fastener with steel mandrel. Install
into punched or pre-drilled holes suitable for all blind/
pop riveting applications. Select grip based on combined
thickness of material to be riveted. Suitable for fastening
metals, wood and plastic.
CODE DESCRIPTION
300444 4.8 x 8mm / 1.5 - 3.5mm Grip 250pk
567399 4.8 x 10mm / 3.5 - 5.5mm Grip 250pk
623515 4.8 x 12mm / 5.5 - 7.5mm Grip 250pk
389614 4.8 x 16mm / 9.5 - 11.5mm Grip 250pk
489964 3.2 x 6mm / 1 - 3mm Grip 500pk
772694 3.2 x 8mm / 3 - 5mm Grip 500pk
854054 3.2 x 10mm / 5 - 7mm Grip 500pk
408063 3.2 x 12mm / 7 - 9mm Grip 500pk
928809 4 x 10mm / 4 - 6mm Grip 500pk
820234 4 x 12mm / 6 - 8mm Grip 500pk
996410 4 x 16mm / 10 - 12mm Grip 500pk
Aluminium mechanical fastener with steel mandrel and large
flange head. Install into punched or pre-drilled holes suitable
for all blind/pop riveting applications. Select grip based on
combined thickness of material to be riveted. Suitable for
fastening metals, wood and plastic.
CODE DESCRIPTION
682618 4.8 x 12mm / 5.5 - 7.5mm Grip
789283 4.8 x 16mm / 9.5 - 11.5mm Grip
850671 4.8 x 18mm / 11.5 - 13.5mm Grip
603938 4.8 x 20mm / 13.5 - 16.5mm Grip
471294 4.8 x 25mm / 16.5 - 20.5mm Grip
Structural Fixings
Hollow Wall Anchors 10pk
Anchor for hollow base materials featuring a demountable
screw. Pre-assembled cavity fixing with flush finish and
wide flange. Locks into base material, allowing removal and
refitting of fixtures. Anti-rotation barbs prevent anchor from
spinning in the hole. A setting tool should be used to ensure
the legs collapse fully, spreading the load over a wide area.
CODE DESCRIPTION
492746 M4 x 32mm
600980 M4 x 45mm
413113 M5 x 37mm
655205 M5 x 52mm
707761 M6 x 65mm
Spring Toggles 10pk
Zinc-plated metal spring toggle with screw. Good corrosion
protection. Quick and easy to install. Expands into any cavity
using spring force. Suitable for narrow cavity depths and
overhead installations. For use on gypsum plasterboard,
fibreboards, chipboard, plywood and cavity slabs.
CODE DESCRIPTION
561723 M3 x 50mm
885656 M5 x 50mm
810889 M5 x 100mm
426562 M5 x 75mm
755088 M6 x 50mm
366409 M6 x 75mm
16