TJ Tokyo Keiki

COMNICA valve controller EC-COM
FEATURES
The EC-COM COMNICA valve controller is specifically designed
DIN rail mounting, a configuration which contributes to
for
efficiencies in layout design and installation work.
It is compatible with all COMNICA
valves with non-integrated controllers
regardless of size, voltage or control
type. (Controller responds to switch
settings.)
Control input signals may be either sink
connection or source connection.
SPECIFICATIONS
Supply voltage
Power consumption
Output current (between valves)
DC 24 V or DC 12 V
Max. 34 W
Max. 1.6 A
Applicable COMNICA valves
Valve size Electrical wiring Coil rated voltage
COM-3/COM-5/COM-7
/COM-8/COM-52
U DIN43650 connector connection H:DC24V
KU Lead wire connection(length:35cm) G:DC12V
“TOKYO KEIKI Manifold-block Cad Designed ”
compact manifold blocks TMCD series
TMCD Series high density manifold blocks address construction
machinery hydraulic system requirements for lighter weight,
compactness, and reduced piping. Manifold blocks, even highly
complex ones, are quickly and accurately designed using Tokyo
Keiki's proprietary manifold block design software tool (Manifold-block
CAD). In addition our design capabilities allow us great flexibility in
responding quickly to say, customer requirements for modification of
and optimization of port position, for example.
FEATURES
●High density, compactness.
●Light weight.
●Reduced piping.
●Design modification freedom.
10