Double Gob Orifice Rings For 10” Spout - Saint-Gobain

Recommendations

Info

18 © 2000 - 2010 Saint-Gobain SEFPRO - Expendables for Container and Tableware
ELECTROFUSED MATERIALS ELECTROFUSED AZS CHEMICAL ANALYSIS CRYSTALLOGRAPHIC ANALYSIS ER 1711 RT SiO 2 12% ZrO 2 40% Al 2O 3 46.7% Principal phases: ..........................................Zirconia (40%) and corundum (43%) Secondary phase: ...............................................................Vitreous phase (17%) PHYSICAL CHARACTERISTICS International System British Standard Units Bulk density .......................3.85 Tm -3 ..........................................240 pcf Cold crushing strength ........200 Mpa Refractoriness .......................................29000 psi under load 2 105 Pa, 0.5% at ....1700°C under load 29 psi, 0.5% at ....3100°F TYPICAL APPLICATIONS Flow blocks for fritts production Troughs, gates for lighting. 19 Na 2O 1% CaO, TiO 2 Fe 2O 3 0.3% The data quoted above provides average values for current production and is not contractual. If further information is required, please contact the Saint-Gobain SEFPRO Marketing Department. © 2000 - 2010 Saint-Gobain SEFPRO - Expendables for Container and Tableware
Page 1 and 2: Expendables for Container & Tablewa
Page 3 and 4: © 2000 - 2010 Saint-Gobain SEFPRO
Page 5 and 6: Customer Service Dedicated to Expen
Page 7 and 8: Influence of the materials on the s
Page 9 and 10: 6 © 2000 - 2010 Saint-Gobain SEFPR
Page 11 and 12: SINTERED MATERIALS HIGH ALUMINA CHE
Page 13 and 14: BONDED MATERIALS BONDED AZS CHEMICA
Page 15 and 16: BONDED MATERIALS BONDED AZS CHEMICA
Page 17 and 18: SINTERED MATERIALS ZIRCON CHEMICAL
Page 19 and 20: SINTERED MATERIALS ZIRCHROM CHEMICA
Page 21: © 2000 - 2010 Saint-Gobain SEFPRO
Page 27 and 28: 81 Metering Spout Triple Gob Orific
Page 29 and 30: Metering Tubes Metric conversions a
Page 31 and 32: 503 Metering Spouts for 10” Tube
Page 33 and 34: 81 Metering Spout Assembly 8” Tub
Page 35 and 36: 515 Metering Spout Assembly 10” T
Page 37 and 38: Bh-F Conventional Spout To Cascade
Page 41 and 42: STANDARD PRODUCTION Single Gob Orif
Page 43 and 44: STANDARD PRODUCTION Double Gob Orif
Page 55 and 56: STANDARD PRODUCTION Triple Gob Orif
Page 57 and 58: OLD REFERENCES Double Gob Orifice R
Page 63 and 64: Tubes Vented Metric conversions are
Page 65 and 66: Tubes Vented Metric conversions are
Page 67 and 68: Tubes Self-Centering-Plain For 194-
Page 69 and 70: Tubes Self-Centering-Vented For 555
Page 71 and 72: Plungers Standard Point Metric conv
Page 73 and 74:
Plungers Offset Point Metric conver
Page 75 and 76:
Spouts Straight Throat with Raised
Page 77 and 78:
Spouts For 81/555 Feeder Tapered Th
Page 79 and 80:
Cement and Insulating Materials Sai
Page 81 and 82:
Spouts Assembly Feeder 81 (Revolvin
Page 83 and 84:
Spouts Assembly Feeder 503 (Revolvi
Page 85 and 86:
Spouts Assembly 555 Feeder 81 Spout
Page 87 and 88:
555 Spouts Assembly 515 Refractory
Page 89 and 90:
Stirrers INDUCED GLASS CIRCULATION
Page 91 and 92:
Stirrers Metric conversions are to
Page 93 and 94:
© 2000 - 2010 Saint-Gobain SEFPRO
Page 95 and 96:
Mantle Blocks Hollow Metric convers
Page 97:
ecyclé. papier sur Imprimé - 2010
show all

Double Gob Orifice Rings For 10” Spout - Saint-Gobain

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?