Hamilton Syringes 2019-20 Catalogue

SYRINGE TECHNICAL REFERENCE | SYRINGE SPECIFICATIONS
Syringe Specifications
Operating Parameters
Operating temperature and pressure varies based on
syringe size, plunger type, and syringe termination. In
the table below are the general operating parameters
for Hamilton syringes. Part number specific data sheets
are available by searching the part number at
www.hamiltoncompany.com.
Operating Parameters
Volume Series Pressure Temperarture
0.5 – 10 µL
25 – 100 µL
250 µL – 10 mL
7000 41 MPa 10 – 115 °C 1
600 14 MPa 10 – 115 °C 1
700 14 MPa 10 – 115 °C 1
800 14 MPa 10 – 115 °C 1
1700 7 MPa 10 – 115 °C 1
1800 7 MPa 10 – 115 °C 1
700 7 MPa 10 – 115 °C 1
800 7 MPa 10 – 115 °C 1
1700 7 MPa 10 – 115 °C 1
1800 7 MPa 10 – 115 °C 1
700 7 MPa 10 – 115 °C 1
800 7 MPa 10 – 115 °C 1
1700 3 MPa 10 – 115 °C 1
1800 3 MPa 10 – 115 °C 1
1000 1 MPa 10 – 115 °C 1
25 – 100 mL 1000 0.7 MPa 10 – 80 °C
0.5 – 2 L Super Syringe 0.2 MPa 0 – 80 °C
1
If the syringe termination is a cemented needle or luer tip cemented
needle then the maximum temperature is 50 °C.
Syringe Dimensions
Most Hamilton syringes are standardized to a 60 mm plunger
stroke length, and where possible, the same barrel outer
diameter is used. For each syringe volume the inner diameter
will change to accommodate the desired dispense volume.
Syringe Dimensions
Volume Barrel OD Barrel ID Stroke Length
0.5 µL 7.8 mm 0.104 mm* 60 mm
1.0 µL 7.8 mm 0.145 mm* 60 mm
2.0 µL 7.8 mm 0.206 mm* 60 mm
2.5 µL 6.6 mm 0.34 mm 27 mm
5 µL 600 Series 6.6 mm 0.48 mm 27 mm
5 µL 700, 800 Series 6.6 mm 0.34 mm 54 mm
5 µL 7000 Series 7.8 mm 0.325 mm* 60 mm
10 µL 700, 800 Series 6.6 mm 0.49 mm 54 mm
10 µL 1700, 1800 Series 6.6 mm 0.46 mm 60 mm
25 µL 7.7 mm 0.73 mm 60 mm
50 µL 7.7 mm 1.03 mm 60 mm
100 µL 7.7 mm 1.40 mm 60 mm
250 µL 7.7 mm 2.30 mm 60 mm
500 µL 7.7 mm 3.26 mm 60 mm
1.0 mL 9.0 mm 4.61 mm 60 mm
2.5 mL – Thin Wall 9.7 mm 7.29 mm 60 mm
2.5 mL 10.3 mm 7.29 mm 60 mm
5 mL 13.5 mm 10.30 mm 60 mm
10 mL 17.7 mm 14.57 mm 60 mm
25 mL 27.1 mm 23.03 mm 60 mm
50 mL 36.9 mm 32.54 mm 60 mm
100 mL 36.9 mm 32.54 mm 120 mm
500 mL 75 mm 62 mm 166 mm
80