Opitec Main catalogue V001_uk_en

Construction Kits
Vehicle Base Plate (Chassis), Large
Lasered plywood base plate with 4 axle supports, for axles up to 4 mm or our electric
gears, clockwork and flywheel motors. The 3mm holes for mounting the drives are
already pre-fabricated. The chassis still has 4mm holes on the outer edges to attach a
body such as our construction strips “Pick-Up”. Design your own vehicle!
Size: approx. 240 x 110 x 3 mm, 1 piece.
808790
7+
7+
7+
Delivery pack:
Delivery pack:
Delivery pack:
Vehicle Base Plate with Electric Gear Motor
Lasered plywood base plate with electric gear motor and
plastic wheels, battery holder and switch.
Size: approx. 240 x 120 x 50 mm, 1 piece.
Vehicle Base Plate with Clockwork Motor
Lasered plywood base plate with clockwork motor and
racing tyres.
Size: approx. 240 x 120 x 50 mm, 1 piece.
Vehicle Base Plate with Flywheel Motor
Lasered plywood base plate with flywheel motor.
Size approx. 240 x 120 x 50 mm, 1 piece.
118831 118842
118853
7+ 1-2 7+ 1-2 7+ 1-2
nofgk nofgk nofgk
100 pieces 100 pieces
20 pieces
Nuts M4
DIN 934, galvanised, set of 100
267038
Cylinder Head Screws
DIN 84, galvanised, set of 100
265212 4 x 10 mm
265256 4 x 16 mm
Construction Strips - Pick-Up
Laser-cut birch plywood parts, 3 mm
thick, holes ø 4 mm, with assembly
instructions, 21 pieces.
Right Angle Fixings
Size 18 mm, 3 mm thick, Inner hole (oval)
4,35 mm
Material Polypropylene, Suitable M 4
808745 1 Set 801307 Pack of 20
* The CLP marking system can be found on page 730.
67