export2020

1465
Engine efficiency tester
Allows endothermic engine compression to be tested within just
a few seconds, without requiring connection to engine, taking
power from vehicle battery, through a dedicated software.
TECHNICAL DATA
Operating voltage: 12V DC (vehicle battery)
Dimensions: 140x75x30 mm
Clamp cable length: 1300 mm
Step 1
Step 2
Step 3
Step 4
Calculating engine rpm
Testing battery voltage trend during
each revolution
Displaying absorbed power and
compression calculated through starter
operation for each piston
Testing battery charge and efficiency
New item
Takes just a few
seconds to test
compression!
RELATIVE COMPRESSION
ABSORBED ELECTRIC POWER
140 mm
30 mm
75 mm
014650010
365 g
1760/RSE
Signal detector
​Allows power supply of parts to be tested, including
• Common rail electro-injectors
• Petrol/LPG electro-injectors
• Piezoelectric injectors
• Flow regulating solenoid valves
• EGR solenoid valves and coils
New item
Performing diagnosis of individual parts of electric
system only requires probe to be brought near part
being tested.
In systems with electromechanical/electronic parts controlled
by a control unit, this tool makes it possible to check whether:
• Control unit is being supplied with power and is performing
its control function
• Cables connecting control unit to part is efficient
• Part being tested has not being disconnected
• Part has not short-circuited
• Part is operating electronically
140 mm
30 mm
75 mm
017600170
365 g
58