SB-Railing Catalogus

Recommendations

Info

�� Proper bonding is critical to achieve the best results with <strong>SB</strong>-<strong>Railing</strong>. It also allows you to assemble the system quickly and easily. By following the tips and instructions for bonding, you also achieve an optimal connection. Optimal bonding is achieved using Loctite adhesives. Loctite produces the perfect adhesives for stainless steel. Loctite 638 is ideally suited to bonding cylindric shaped com- �� Loctite 7063, are ideal for such purposes. A line of adhesive is then applied to both surfaces being bonded before bringing them into contact with one another with a twisting motion. This ensures that the adhesive is spread evenly across the whole contact surface. Any excess adhesive can be removed easily using a clean cloth. The time required for the adhesive to harden fully depends on ambient temperature. Parts can be subjected to light loads after having hardened for only a few hours. At temperatures below +5 °C, an activator should be used, e.g. Loctite 7649, to achieve proper bonding. Activator (Loctite 7649) should be applied to the clean surfaces of the parts being bonded. A line of Loctite 638 adhesive should then be applied to both surfaces and then brought into contact with one another with a twisting motion. Activators ensure faster curing times. The adhesive will have fully hardened after 72 hours. Loctite 638 Loctite 243 Loctite 7649 Loctite 7063 6740.03 50 ML 6740.06 50 ML 6740.04 150 ML 6740.05 150 ML Loctite 638 is the ideal adhesive Loctite 243 is the ideal adhesive Loctite 7649 ensures a faster SuperClean can be used to for cylindrical joints. Just for locking bolts and sockethead curing time, which promotes clean and degrease parts. This a small quantity is sufficient to screws. After cleaning parts better hardening. product should always be used achieve solid bonding, as long with Loctite 7063, apply a drop before bonding parts together. as it is applied properly. of Loctite adhesive to the screw thread. 32
�� 33
Page 1 and 2: SB-RAILING A PRIME EXAMPLE OF ‘PR
Page 3 and 4: The SB-Railing system is available
Page 5: SB Information Adhesive Instruction
Page 8 and 9: Tube connectors 304 INDOOR Ø H 020
Page 10 and 11: Tube connectors Tube connector adju
Page 13 and 14: Handrail Supports & Brackets ��
Page 15 and 16: Handrail Supports & Brackets Handra
Page 31: Handrail Supports & Brackets Handra
Page 36: End Balls 304 0101.100.304 0101.120
Page 39: QuickFix-End Caps End Cap - Flat -
Page 42 and 43: Baluster Posts Baluster post Balust
Page 44 and 45: Baluster Posts 304 INDOOR D B Ø 01
Page 46 and 47: Baluster clamps Baluster clamp 45/6
Page 48 and 49: 48 S+BI GUARENTEES AN OPTIMAL QUALI
Page 51 and 52: This component requires bolting. Ad
Page 53: Adaptors 304 INDOOR D Ø 0503.424.3
Page 56 and 57: Glass Adaptors Glass Adaptor Ø 30
Page 58 and 59: Sheet Adaptors 304 304 0515.000.304
Page 61 and 62: This component will be glued. This
Page 63 and 64: Crossbar holders Crossbar holder Ø
Page 65 and 66: Crossbar holders Crossbar holder Ø
Page 67: Bar holders Bar holder Ø 22 adjust
Page 70 and 71: Slotted Tube System 304 1201.425.30
Page 73 and 74: This component will be glued This c
Page 75: Demo displays Demo Case Demo railin
Page 78 and 79: Tubes 304 2004968 2004973 2004978 2
Page 80 and 81: S+BI LARGE SELECTION IN STOCK 80
Page 83 and 84:
This component will be glued. This
Page 85 and 86:
Square system - Tube connector Tube
Page 87 and 88:
Square System - Handrail Supports &
Page 89 and 90:
Square System - Baluster Post Balus
Page 91 and 92:
Square System - Crossbar holders Cr
Page 93:
Cleaning & Maintenance Stainless st
Page 96 and 97:
Wood System - Tube connector 304 02
Page 98 and 99:
End caps 304 0242.420.304 304 0243.
Page 100 and 101:
100
Page 102 and 103:
Glass Clips 304 INDOOR T (mm) 304 I
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Zamac Glass Clips Crude Zamac INDOO
Page 114 and 115:
Zamac Glass Clips Crude Crude Zamac
Page 116 and 117:
Zamac Glass Clips Crude Crude Zamac
Page 118 and 119:
Glass Clip Gaskets Artikel Nr. Mode
Page 120 and 121:
SB-Railing & Carl Stahl An exciting
Page 122 and 123:
122
Page 124 and 125:
124
Page 126 and 127:
SB-Prefab 0161.xxx.xxx Single-sided
Page 128 and 129:
SB-Prefab 0163.xxx.xxx Single-sided
Page 132:
s+bi B.V. Gildenweg 21, 3334 KC Zwi
show all

SB-Railing Catalogus

Create successful ePaper yourself

Delete template?

Save as template?