SAFETYPLUS AUTOMOTIVE CATALOGUE

HYDRAULICS & INDUSTRIAL GEAR OILS
HYDRALUBE HLP 22,32,46,68
Mineral oil-base hydraulic oil. Meets and exceeds
the requirementsof DIN 51 524 part 2 (HLP) ISO
6743/3 (HM) and AFNOR NF E48 602 (HM).
ISO-VG
HYDRALUBE HLP-D 10,22,32,46,68
Cleaning active EP hydraulic oil for extreme
operating conditions. Meets and exceeds the
requirements of DIN 51 524 part 2 (HLP,
deterging) and MAN-N 698.
ISO-VG
HYDRALUBE HVLP ISO VG
22,32,46,68,100
Swd Rheinol Hydralube HVLP - hydraulic fluids
are pressure mediums, showing very good
viscosity/temperature properties, based on
mineral oil. The additivation improves the
corrosion protection, the aging properties, and the
wear protection, whereby the product meets and
exceeds the requirements according DIN 51 524
Part 3.
Specification / Recommendations: DIN 51 524
Impulsor CLP 32, 46, 68, 100,
150, 220, 320, 460, 680
EP gear and circulating oil for use in heavily
loaded industrial gears and for use at high
sliding speeds and roller pressings. Meets
and exceeds the requirements of DIN 51 517
part 3 (CLP).
ISO-VG
32, 46, 68, 100,
150, 220, 320, 460, 680
Part 3 Part 3 HVLP
Recommendation:
Allison C-3/C-4
Ford M2C134D / M2C86A-C
Massey Ferguson M 1143/1145
John Deere J20C/D
ZF TE-ML-03E / -06
Case MS 1204-1207/1209/1210
Deutz Hydr Trans Fluid
Caterpillar TO-2
15