RF over Fiber Link ROF-20

SATCOM
ROF – x – x
• Professional RF-over-Fiber link (50-3.000 MHz)
• Outdoor and Indoor Chassis providing Redundant Link Configuration 1+1, 2+1 or 4+1
• Front and Rear Ethernet plus 2 SFP Slots for Ethernet over Fiber allows perfect integration in any customer system
• All Optical RX & Optical TX modules are HOT-SWAPPABLE including Power Supply and Network Controller
• The ROF system can be Configurated, Controlled and Monitored via the front panel Controller or via WEB GUI or SNMP
• All 3 Chassis are specially designed to allow mixed configurations and support all the main Optical & RF Connectors
• Internal LNB Powering or an integrated Bias-T built-in the RF Connector Adapter module allows powering any kind
of connected equipment, e.g. LNB
BENEFIT
• TX & RX 5 years warranty
• Suited for HTS or Ka-Band Applications
• All OPTICAL Connections in the Front
• All RF Connections in the Rear
• Front accessable RF Monitoring Ports
• External or Internal LNB Powering with Current Monitoring
• Superior RF, OMI Linearity and Low Noise
INDOOR CHASSIS
FEATURES
• Monitoring with Keyboard Controller , SNMP or WEB-GUI
• LED Alarms available in all HOT-SWAP Modules
• RF & OPTICAL Power Sensor Monitor & Alarms
• 50 & 75 Ohm available with F, SMA, BNC, N RF-Connectors
• Fully Compatible with existing Systems
• Ideal for HTS (High Throughtput Satellite) & Ka-Band Ready
• Serve all Up-Link dedicated Requirements
mod. ROF-8-IU
mod. ROF-20-IU
• 1 Unit 19” Rack Chassis
• Front Hot-Swap Slots:
- Key Board Controller
- Indoor Redundant Power Supply
- Up to 8 Optical RX or TX Module
• Rear Slot and Connections
- RF Connector Adapter or 1+1 Redundancy
- Hot-Swap Fan
- Copper Ethernet LAN
- 2 SFP for Ethernet over Fiber
- SUB-D9 Dry contact Alarm & Remote Reset
mod. ROF-20-OU
OUTDOOR CHASSIS
• 2 Unit 19” Rack Chassis
• Front Hot-Swap Slots:
- Key Board Controller with Ethernet LAN
- Indoor Redundant Power Supply
- Up to 20 Optical RX or TX Module
• Rear Slot and Connections
- RF connect. Adapt. or 1+1, 2+1 & 4+1 Redundancy Switch
- Hot-Swap Fans
- Copper Ethernet LAN
- 2 SFP (opt.) Slots for Ethernet over Fiber
- 1 SUB-D9 Dry Contact Alarm
• 6 Unit 17” Rack Chassis
• Front Hot-Swap Slots:
- Key Board Controller with Ethernet LAN
- Outdoor Redundant Power Supply
- Up to 20 Plug-in Optical RX or TX Module
- RF Connect. Adapt. or 1+1, 2+1 & 4+1
Redundancy Switch
- Copper Ethernet LAN
- 2 SFP for Ethernet over Fiber
- SUB-D9 Dry Contact Alarm & Remote Reset
- Hot-Swap Fans
• Optical Patch Panel
• RF Patch Panel
• De-Icing
• Sun Shade
- 2 -