PECS – The Control System for Extrusion Blow Moulding - Inea
PECS – The Control System for Extrusion Blow Moulding - Inea
PECS – The Control System for Extrusion Blow Moulding - Inea
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
� For continuous extrusion and <strong>for</strong> accumulator-based machines<br />
� Up to 16 channels available <strong>for</strong> multi-head machines (by using up to four SPAC20 PA4<br />
modules. Axial wall thickness control possible.<br />
� Cycle time correction <strong>for</strong> time based systems and push-out time correction <strong>for</strong><br />
accumulator based machines<br />
� Separate weight and profile adjustments<br />
Temperature <strong>Control</strong><br />
Multi-loop temperature control is capable of accurate temperature control of different types of<br />
extruders and co-extruders. Intelligent pre-tune and auto-tune functions are built-in to enable<br />
simple automatic tuning of the control loops and to adapt control parameters to varying load<br />
conditions. User-friendly graphical screens and improved diagnostics make the control<br />
system easy to use and simple to maintain the heating/cooling elements.<br />
4