06.07.2020 • Views

Sieg SX4 Grizzly G0720R Installation

We move straight into removing the head by using an engine hoist. The table and Y axis saddle have already been removed.

ePAPER READ

DOWNLOAD ePAPER

heavymetalcnc

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

Here we have pictures of the Y motor mount in place. You can see it will

not interfere with the saddle

Schlumberger-Private

Here we have pictures of the Y motor mount in place. You can see it willnot interfere with the saddleSchlumberger-Private

You can see there are some things missing from thisinstallation instruction. This was built for a customer who sentthe machine and had the install done. Since we no longer havethe machine we cant go back and fix the instructions better.There is a link to a you tube video on the X4 page that showshow the installation was done in a bit more detailSchlumberger-Private

Page 1 and 2: Sieg SX4Grizzly G0720RInstallationS
Page 3 and 4: We move straight into removingthe h
Page 5 and 6: Here is the backof the spindlehead.
Page 7 and 8: More pictures of the Z saddle remov
Page 9 and 10: You are going to drill and tap hole
Page 11 and 12: Holes Tapped for 6mmcap screwsSchlu
Page 13: The original lead screw nuts for Y

Sieg SX4 Grizzly G0720R Installation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?